The builder.py file is getting too long, so split out some code.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v4: - Fix missing import in builder.py
Changes in v3: - Add new patch to move BuilderThread code to its own file
Changes in v2: None
tools/buildman/builder.py | 439 +--------------------------------------- tools/buildman/builderthread.py | 434 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 442 insertions(+), 431 deletions(-) create mode 100644 tools/buildman/builderthread.py
diff --git a/tools/buildman/builder.py b/tools/buildman/builder.py index d2b72d5..e2da0eb 100644 --- a/tools/buildman/builder.py +++ b/tools/buildman/builder.py @@ -6,7 +6,6 @@ #
import collections -import errno from datetime import datetime, timedelta import glob import os @@ -15,9 +14,9 @@ import Queue import shutil import string import sys -import threading import time
+import builderthread import command import gitutil import terminal @@ -97,428 +96,6 @@ OUTCOME_OK, OUTCOME_WARNING, OUTCOME_ERROR, OUTCOME_UNKNOWN = range(4) trans_valid_chars = string.maketrans("/: ", "---")
-def Mkdir(dirname): - """Make a directory if it doesn't already exist. - - Args: - dirname: Directory to create - """ - try: - os.mkdir(dirname) - except OSError as err: - if err.errno == errno.EEXIST: - pass - else: - raise - -class BuilderJob: - """Holds information about a job to be performed by a thread - - Members: - board: Board object to build - commits: List of commit options to build. - """ - def __init__(self): - self.board = None - self.commits = [] - - -class ResultThread(threading.Thread): - """This thread processes results from builder threads. - - It simply passes the results on to the builder. There is only one - result thread, and this helps to serialise the build output. - """ - def __init__(self, builder): - """Set up a new result thread - - Args: - builder: Builder which will be sent each result - """ - threading.Thread.__init__(self) - self.builder = builder - - def run(self): - """Called to start up the result thread. - - We collect the next result job and pass it on to the build. - """ - while True: - result = self.builder.out_queue.get() - self.builder.ProcessResult(result) - self.builder.out_queue.task_done() - - -class BuilderThread(threading.Thread): - """This thread builds U-Boot for a particular board. - - An input queue provides each new job. We run 'make' to build U-Boot - and then pass the results on to the output queue. - - Members: - builder: The builder which contains information we might need - thread_num: Our thread number (0-n-1), used to decide on a - temporary directory - """ - def __init__(self, builder, thread_num): - """Set up a new builder thread""" - threading.Thread.__init__(self) - self.builder = builder - self.thread_num = thread_num - - def Make(self, commit, brd, stage, cwd, *args, **kwargs): - """Run 'make' on a particular commit and board. - - The source code will already be checked out, so the 'commit' - argument is only for information. - - Args: - commit: Commit object that is being built - brd: Board object that is being built - stage: Stage of the build. Valid stages are: - distclean - can be called to clean source - config - called to configure for a board - build - the main make invocation - it does the build - args: A list of arguments to pass to 'make' - kwargs: A list of keyword arguments to pass to command.RunPipe() - - Returns: - CommandResult object - """ - return self.builder.do_make(commit, brd, stage, cwd, *args, - **kwargs) - - def RunCommit(self, commit_upto, brd, work_dir, do_config, force_build, - force_build_failures): - """Build a particular commit. - - If the build is already done, and we are not forcing a build, we skip - the build and just return the previously-saved results. - - Args: - commit_upto: Commit number to build (0...n-1) - brd: Board object to build - work_dir: Directory to which the source will be checked out - do_config: True to run a make <board>_defconfig on the source - force_build: Force a build even if one was previously done - force_build_failures: Force a bulid if the previous result showed - failure - - Returns: - tuple containing: - - CommandResult object containing the results of the build - - boolean indicating whether 'make config' is still needed - """ - # Create a default result - it will be overwritte by the call to - # self.Make() below, in the event that we do a build. - result = command.CommandResult() - result.return_code = 0 - if self.builder.in_tree: - out_dir = work_dir - else: - out_dir = os.path.join(work_dir, 'build') - - # Check if the job was already completed last time - done_file = self.builder.GetDoneFile(commit_upto, brd.target) - result.already_done = os.path.exists(done_file) - will_build = (force_build or force_build_failures or - not result.already_done) - if result.already_done and will_build: - # Get the return code from that build and use it - with open(done_file, 'r') as fd: - result.return_code = int(fd.readline()) - err_file = self.builder.GetErrFile(commit_upto, brd.target) - if os.path.exists(err_file) and os.stat(err_file).st_size: - result.stderr = 'bad' - elif not force_build: - # The build passed, so no need to build it again - will_build = False - - if will_build: - # We are going to have to build it. First, get a toolchain - if not self.toolchain: - try: - self.toolchain = self.builder.toolchains.Select(brd.arch) - except ValueError as err: - result.return_code = 10 - result.stdout = '' - result.stderr = str(err) - # TODO(sjg@chromium.org): This gets swallowed, but needs - # to be reported. - - if self.toolchain: - # Checkout the right commit - if self.builder.commits: - commit = self.builder.commits[commit_upto] - if self.builder.checkout: - git_dir = os.path.join(work_dir, '.git') - gitutil.Checkout(commit.hash, git_dir, work_dir, - force=True) - else: - commit = 'current' - - # Set up the environment and command line - env = self.toolchain.MakeEnvironment() - Mkdir(out_dir) - args = [] - cwd = work_dir - if not self.builder.in_tree: - if commit_upto is None: - # In this case we are building in the original source - # directory (i.e. the current directory where buildman - # is invoked. The output directory is set to this - # thread's selected work directory. - # - # Symlinks can confuse U-Boot's Makefile since - # we may use '..' in our path, so remove them. - work_dir = os.path.realpath(work_dir) - args.append('O=%s/build' % work_dir) - cwd = None - else: - args.append('O=build') - args.append('-s') - if self.builder.num_jobs is not None: - args.extend(['-j', str(self.builder.num_jobs)]) - config_args = ['%s_defconfig' % brd.target] - config_out = '' - args.extend(self.builder.toolchains.GetMakeArguments(brd)) - - # If we need to reconfigure, do that now - if do_config: - result = self.Make(commit, brd, 'distclean', cwd, - 'distclean', *args, env=env) - result = self.Make(commit, brd, 'config', cwd, - *(args + config_args), env=env) - config_out = result.combined - do_config = False # No need to configure next time - if result.return_code == 0: - result = self.Make(commit, brd, 'build', cwd, *args, - env=env) - result.stdout = config_out + result.stdout - else: - result.return_code = 1 - result.stderr = 'No tool chain for %s\n' % brd.arch - result.already_done = False - - result.toolchain = self.toolchain - result.brd = brd - result.commit_upto = commit_upto - result.out_dir = out_dir - return result, do_config - - def _WriteResult(self, result, keep_outputs): - """Write a built result to the output directory. - - Args: - result: CommandResult object containing result to write - keep_outputs: True to store the output binaries, False - to delete them - """ - # Fatal error - if result.return_code < 0: - return - - # Aborted? - if result.stderr and 'No child processes' in result.stderr: - return - - if result.already_done: - return - - # Write the output and stderr - output_dir = self.builder._GetOutputDir(result.commit_upto) - Mkdir(output_dir) - build_dir = self.builder.GetBuildDir(result.commit_upto, - result.brd.target) - Mkdir(build_dir) - - outfile = os.path.join(build_dir, 'log') - with open(outfile, 'w') as fd: - if result.stdout: - fd.write(result.stdout) - - errfile = self.builder.GetErrFile(result.commit_upto, - result.brd.target) - if result.stderr: - with open(errfile, 'w') as fd: - fd.write(result.stderr) - elif os.path.exists(errfile): - os.remove(errfile) - - if result.toolchain: - # Write the build result and toolchain information. - done_file = self.builder.GetDoneFile(result.commit_upto, - result.brd.target) - with open(done_file, 'w') as fd: - fd.write('%s' % result.return_code) - with open(os.path.join(build_dir, 'toolchain'), 'w') as fd: - print >>fd, 'gcc', result.toolchain.gcc - print >>fd, 'path', result.toolchain.path - print >>fd, 'cross', result.toolchain.cross - print >>fd, 'arch', result.toolchain.arch - fd.write('%s' % result.return_code) - - with open(os.path.join(build_dir, 'toolchain'), 'w') as fd: - print >>fd, 'gcc', result.toolchain.gcc - print >>fd, 'path', result.toolchain.path - - # Write out the image and function size information and an objdump - env = result.toolchain.MakeEnvironment() - lines = [] - for fname in ['u-boot', 'spl/u-boot-spl']: - cmd = ['%snm' % self.toolchain.cross, '--size-sort', fname] - nm_result = command.RunPipe([cmd], capture=True, - capture_stderr=True, cwd=result.out_dir, - raise_on_error=False, env=env) - if nm_result.stdout: - nm = self.builder.GetFuncSizesFile(result.commit_upto, - result.brd.target, fname) - with open(nm, 'w') as fd: - print >>fd, nm_result.stdout, - - cmd = ['%sobjdump' % self.toolchain.cross, '-h', fname] - dump_result = command.RunPipe([cmd], capture=True, - capture_stderr=True, cwd=result.out_dir, - raise_on_error=False, env=env) - rodata_size = '' - if dump_result.stdout: - objdump = self.builder.GetObjdumpFile(result.commit_upto, - result.brd.target, fname) - with open(objdump, 'w') as fd: - print >>fd, dump_result.stdout, - for line in dump_result.stdout.splitlines(): - fields = line.split() - if len(fields) > 5 and fields[1] == '.rodata': - rodata_size = fields[2] - - cmd = ['%ssize' % self.toolchain.cross, fname] - size_result = command.RunPipe([cmd], capture=True, - capture_stderr=True, cwd=result.out_dir, - raise_on_error=False, env=env) - if size_result.stdout: - lines.append(size_result.stdout.splitlines()[1] + ' ' + - rodata_size) - - # Write out the image sizes file. This is similar to the output - # of binutil's 'size' utility, but it omits the header line and - # adds an additional hex value at the end of each line for the - # rodata size - if len(lines): - sizes = self.builder.GetSizesFile(result.commit_upto, - result.brd.target) - with open(sizes, 'w') as fd: - print >>fd, '\n'.join(lines) - - # Now write the actual build output - if keep_outputs: - patterns = ['u-boot', '*.bin', 'u-boot.dtb', '*.map', - 'include/autoconf.mk', 'spl/u-boot-spl', - 'spl/u-boot-spl.bin'] - for pattern in patterns: - file_list = glob.glob(os.path.join(result.out_dir, pattern)) - for fname in file_list: - shutil.copy(fname, build_dir) - - - def RunJob(self, job): - """Run a single job - - A job consists of a building a list of commits for a particular board. - - Args: - job: Job to build - """ - brd = job.board - work_dir = self.builder.GetThreadDir(self.thread_num) - self.toolchain = None - if job.commits: - # Run 'make board_defconfig' on the first commit - do_config = True - commit_upto = 0 - force_build = False - for commit_upto in range(0, len(job.commits), job.step): - result, request_config = self.RunCommit(commit_upto, brd, - work_dir, do_config, - force_build or self.builder.force_build, - self.builder.force_build_failures) - failed = result.return_code or result.stderr - did_config = do_config - if failed and not do_config: - # If our incremental build failed, try building again - # with a reconfig. - if self.builder.force_config_on_failure: - result, request_config = self.RunCommit(commit_upto, - brd, work_dir, True, True, False) - did_config = True - if not self.builder.force_reconfig: - do_config = request_config - - # If we built that commit, then config is done. But if we got - # an warning, reconfig next time to force it to build the same - # files that created warnings this time. Otherwise an - # incremental build may not build the same file, and we will - # think that the warning has gone away. - # We could avoid this by using -Werror everywhere... - # For errors, the problem doesn't happen, since presumably - # the build stopped and didn't generate output, so will retry - # that file next time. So we could detect warnings and deal - # with them specially here. For now, we just reconfigure if - # anything goes work. - # Of course this is substantially slower if there are build - # errors/warnings (e.g. 2-3x slower even if only 10% of builds - # have problems). - if (failed and not result.already_done and not did_config and - self.builder.force_config_on_failure): - # If this build failed, try the next one with a - # reconfigure. - # Sometimes if the board_config.h file changes it can mess - # with dependencies, and we get: - # make: *** No rule to make target `include/autoconf.mk', - # needed by `depend'. - do_config = True - force_build = True - else: - force_build = False - if self.builder.force_config_on_failure: - if failed: - do_config = True - result.commit_upto = commit_upto - if result.return_code < 0: - raise ValueError('Interrupt') - - # We have the build results, so output the result - self._WriteResult(result, job.keep_outputs) - self.builder.out_queue.put(result) - else: - # Just build the currently checked-out build - result, request_config = self.RunCommit(None, brd, work_dir, True, - True, self.builder.force_build_failures) - result.commit_upto = 0 - self._WriteResult(result, job.keep_outputs) - self.builder.out_queue.put(result) - - def run(self): - """Our thread's run function - - This thread picks a job from the queue, runs it, and then goes to the - next job. - """ - alive = True - while True: - job = self.builder.queue.get() - if self.builder.active and alive: - self.RunJob(job) - ''' - try: - if self.builder.active and alive: - self.RunJob(job) - except Exception as err: - alive = False - print err - ''' - self.builder.queue.task_done() - - class Builder: """Class for building U-Boot for a particular commit.
@@ -639,13 +216,13 @@ class Builder: self.queue = Queue.Queue() self.out_queue = Queue.Queue() for i in range(self.num_threads): - t = BuilderThread(self, i) + t = builderthread.BuilderThread(self, i) t.setDaemon(True) t.start() self.threads.append(t)
self.last_line_len = 0 - t = ResultThread(self) + t = builderthread.ResultThread(self) t.setDaemon(True) t.start() self.threads.append(t) @@ -1385,7 +962,7 @@ class Builder: for self.commit_upto in range(self.commit_count): self.SelectCommit(commits[self.commit_upto]) self.SelectOutputDir() - Mkdir(self.output_dir) + builderthread.Mkdir(self.output_dir)
self.BuildBoardsForCommit(board_selected, keep_outputs) board_dict, err_lines = self.GetResultSummary() @@ -1413,7 +990,7 @@ class Builder: setup_git: True to set up a git repo clone """ thread_dir = self.GetThreadDir(thread_num) - Mkdir(thread_dir) + builderthread.Mkdir(thread_dir) git_dir = os.path.join(thread_dir, '.git')
# Clone the repo if it doesn't already exist @@ -1436,7 +1013,7 @@ class Builder: max_threads: Maximum number of threads we expect to need. setup_git: True to set up a git repo clone """ - Mkdir(self._working_dir) + builderthread.Mkdir(self._working_dir) for thread in range(max_threads): self._PrepareThread(thread, setup_git)
@@ -1469,7 +1046,7 @@ class Builder: self.commits = commits
self.ResetResultSummary(board_selected) - Mkdir(self.base_dir) + builderthread.Mkdir(self.base_dir) self._PrepareWorkingSpace(min(self.num_threads, len(board_selected)), commits is not None) self._PrepareOutputSpace() @@ -1478,7 +1055,7 @@ class Builder:
# Create jobs to build all commits for each board for brd in board_selected.itervalues(): - job = BuilderJob() + job = builderthread.BuilderJob() job.board = brd job.commits = commits job.keep_outputs = keep_outputs diff --git a/tools/buildman/builderthread.py b/tools/buildman/builderthread.py new file mode 100644 index 0000000..32297e2 --- /dev/null +++ b/tools/buildman/builderthread.py @@ -0,0 +1,434 @@ +# Copyright (c) 2014 Google, Inc +# +# SPDX-License-Identifier: GPL-2.0+ +# + +import errno +import glob +import os +import shutil +import threading + +import command +import gitutil + +def Mkdir(dirname): + """Make a directory if it doesn't already exist. + + Args: + dirname: Directory to create + """ + try: + os.mkdir(dirname) + except OSError as err: + if err.errno == errno.EEXIST: + pass + else: + raise + +class BuilderJob: + """Holds information about a job to be performed by a thread + + Members: + board: Board object to build + commits: List of commit options to build. + """ + def __init__(self): + self.board = None + self.commits = [] + + +class ResultThread(threading.Thread): + """This thread processes results from builder threads. + + It simply passes the results on to the builder. There is only one + result thread, and this helps to serialise the build output. + """ + def __init__(self, builder): + """Set up a new result thread + + Args: + builder: Builder which will be sent each result + """ + threading.Thread.__init__(self) + self.builder = builder + + def run(self): + """Called to start up the result thread. + + We collect the next result job and pass it on to the build. + """ + while True: + result = self.builder.out_queue.get() + self.builder.ProcessResult(result) + self.builder.out_queue.task_done() + + +class BuilderThread(threading.Thread): + """This thread builds U-Boot for a particular board. + + An input queue provides each new job. We run 'make' to build U-Boot + and then pass the results on to the output queue. + + Members: + builder: The builder which contains information we might need + thread_num: Our thread number (0-n-1), used to decide on a + temporary directory + """ + def __init__(self, builder, thread_num): + """Set up a new builder thread""" + threading.Thread.__init__(self) + self.builder = builder + self.thread_num = thread_num + + def Make(self, commit, brd, stage, cwd, *args, **kwargs): + """Run 'make' on a particular commit and board. + + The source code will already be checked out, so the 'commit' + argument is only for information. + + Args: + commit: Commit object that is being built + brd: Board object that is being built + stage: Stage of the build. Valid stages are: + distclean - can be called to clean source + config - called to configure for a board + build - the main make invocation - it does the build + args: A list of arguments to pass to 'make' + kwargs: A list of keyword arguments to pass to command.RunPipe() + + Returns: + CommandResult object + """ + return self.builder.do_make(commit, brd, stage, cwd, *args, + **kwargs) + + def RunCommit(self, commit_upto, brd, work_dir, do_config, force_build, + force_build_failures): + """Build a particular commit. + + If the build is already done, and we are not forcing a build, we skip + the build and just return the previously-saved results. + + Args: + commit_upto: Commit number to build (0...n-1) + brd: Board object to build + work_dir: Directory to which the source will be checked out + do_config: True to run a make <board>_defconfig on the source + force_build: Force a build even if one was previously done + force_build_failures: Force a bulid if the previous result showed + failure + + Returns: + tuple containing: + - CommandResult object containing the results of the build + - boolean indicating whether 'make config' is still needed + """ + # Create a default result - it will be overwritte by the call to + # self.Make() below, in the event that we do a build. + result = command.CommandResult() + result.return_code = 0 + if self.builder.in_tree: + out_dir = work_dir + else: + out_dir = os.path.join(work_dir, 'build') + + # Check if the job was already completed last time + done_file = self.builder.GetDoneFile(commit_upto, brd.target) + result.already_done = os.path.exists(done_file) + will_build = (force_build or force_build_failures or + not result.already_done) + if result.already_done and will_build: + # Get the return code from that build and use it + with open(done_file, 'r') as fd: + result.return_code = int(fd.readline()) + err_file = self.builder.GetErrFile(commit_upto, brd.target) + if os.path.exists(err_file) and os.stat(err_file).st_size: + result.stderr = 'bad' + elif not force_build: + # The build passed, so no need to build it again + will_build = False + + if will_build: + # We are going to have to build it. First, get a toolchain + if not self.toolchain: + try: + self.toolchain = self.builder.toolchains.Select(brd.arch) + except ValueError as err: + result.return_code = 10 + result.stdout = '' + result.stderr = str(err) + # TODO(sjg@chromium.org): This gets swallowed, but needs + # to be reported. + + if self.toolchain: + # Checkout the right commit + if self.builder.commits: + commit = self.builder.commits[commit_upto] + if self.builder.checkout: + git_dir = os.path.join(work_dir, '.git') + gitutil.Checkout(commit.hash, git_dir, work_dir, + force=True) + else: + commit = 'current' + + # Set up the environment and command line + env = self.toolchain.MakeEnvironment() + Mkdir(out_dir) + args = [] + cwd = work_dir + if not self.builder.in_tree: + if commit_upto is None: + # In this case we are building in the original source + # directory (i.e. the current directory where buildman + # is invoked. The output directory is set to this + # thread's selected work directory. + # + # Symlinks can confuse U-Boot's Makefile since + # we may use '..' in our path, so remove them. + work_dir = os.path.realpath(work_dir) + args.append('O=%s/build' % work_dir) + cwd = None + else: + args.append('O=build') + args.append('-s') + if self.builder.num_jobs is not None: + args.extend(['-j', str(self.builder.num_jobs)]) + config_args = ['%s_defconfig' % brd.target] + config_out = '' + args.extend(self.builder.toolchains.GetMakeArguments(brd)) + + # If we need to reconfigure, do that now + if do_config: + result = self.Make(commit, brd, 'distclean', cwd, + 'distclean', *args, env=env) + result = self.Make(commit, brd, 'config', cwd, + *(args + config_args), env=env) + config_out = result.combined + do_config = False # No need to configure next time + if result.return_code == 0: + result = self.Make(commit, brd, 'build', cwd, *args, + env=env) + result.stdout = config_out + result.stdout + else: + result.return_code = 1 + result.stderr = 'No tool chain for %s\n' % brd.arch + result.already_done = False + + result.toolchain = self.toolchain + result.brd = brd + result.commit_upto = commit_upto + result.out_dir = out_dir + return result, do_config + + def _WriteResult(self, result, keep_outputs): + """Write a built result to the output directory. + + Args: + result: CommandResult object containing result to write + keep_outputs: True to store the output binaries, False + to delete them + """ + # Fatal error + if result.return_code < 0: + return + + # Aborted? + if result.stderr and 'No child processes' in result.stderr: + return + + if result.already_done: + return + + # Write the output and stderr + output_dir = self.builder._GetOutputDir(result.commit_upto) + Mkdir(output_dir) + build_dir = self.builder.GetBuildDir(result.commit_upto, + result.brd.target) + Mkdir(build_dir) + + outfile = os.path.join(build_dir, 'log') + with open(outfile, 'w') as fd: + if result.stdout: + fd.write(result.stdout) + + errfile = self.builder.GetErrFile(result.commit_upto, + result.brd.target) + if result.stderr: + with open(errfile, 'w') as fd: + fd.write(result.stderr) + elif os.path.exists(errfile): + os.remove(errfile) + + if result.toolchain: + # Write the build result and toolchain information. + done_file = self.builder.GetDoneFile(result.commit_upto, + result.brd.target) + with open(done_file, 'w') as fd: + fd.write('%s' % result.return_code) + with open(os.path.join(build_dir, 'toolchain'), 'w') as fd: + print >>fd, 'gcc', result.toolchain.gcc + print >>fd, 'path', result.toolchain.path + print >>fd, 'cross', result.toolchain.cross + print >>fd, 'arch', result.toolchain.arch + fd.write('%s' % result.return_code) + + with open(os.path.join(build_dir, 'toolchain'), 'w') as fd: + print >>fd, 'gcc', result.toolchain.gcc + print >>fd, 'path', result.toolchain.path + + # Write out the image and function size information and an objdump + env = result.toolchain.MakeEnvironment() + lines = [] + for fname in ['u-boot', 'spl/u-boot-spl']: + cmd = ['%snm' % self.toolchain.cross, '--size-sort', fname] + nm_result = command.RunPipe([cmd], capture=True, + capture_stderr=True, cwd=result.out_dir, + raise_on_error=False, env=env) + if nm_result.stdout: + nm = self.builder.GetFuncSizesFile(result.commit_upto, + result.brd.target, fname) + with open(nm, 'w') as fd: + print >>fd, nm_result.stdout, + + cmd = ['%sobjdump' % self.toolchain.cross, '-h', fname] + dump_result = command.RunPipe([cmd], capture=True, + capture_stderr=True, cwd=result.out_dir, + raise_on_error=False, env=env) + rodata_size = '' + if dump_result.stdout: + objdump = self.builder.GetObjdumpFile(result.commit_upto, + result.brd.target, fname) + with open(objdump, 'w') as fd: + print >>fd, dump_result.stdout, + for line in dump_result.stdout.splitlines(): + fields = line.split() + if len(fields) > 5 and fields[1] == '.rodata': + rodata_size = fields[2] + + cmd = ['%ssize' % self.toolchain.cross, fname] + size_result = command.RunPipe([cmd], capture=True, + capture_stderr=True, cwd=result.out_dir, + raise_on_error=False, env=env) + if size_result.stdout: + lines.append(size_result.stdout.splitlines()[1] + ' ' + + rodata_size) + + # Write out the image sizes file. This is similar to the output + # of binutil's 'size' utility, but it omits the header line and + # adds an additional hex value at the end of each line for the + # rodata size + if len(lines): + sizes = self.builder.GetSizesFile(result.commit_upto, + result.brd.target) + with open(sizes, 'w') as fd: + print >>fd, '\n'.join(lines) + + # Now write the actual build output + if keep_outputs: + patterns = ['u-boot', '*.bin', 'u-boot.dtb', '*.map', + 'include/autoconf.mk', 'spl/u-boot-spl', + 'spl/u-boot-spl.bin'] + for pattern in patterns: + file_list = glob.glob(os.path.join(result.out_dir, pattern)) + for fname in file_list: + shutil.copy(fname, build_dir) + + + def RunJob(self, job): + """Run a single job + + A job consists of a building a list of commits for a particular board. + + Args: + job: Job to build + """ + brd = job.board + work_dir = self.builder.GetThreadDir(self.thread_num) + self.toolchain = None + if job.commits: + # Run 'make board_defconfig' on the first commit + do_config = True + commit_upto = 0 + force_build = False + for commit_upto in range(0, len(job.commits), job.step): + result, request_config = self.RunCommit(commit_upto, brd, + work_dir, do_config, + force_build or self.builder.force_build, + self.builder.force_build_failures) + failed = result.return_code or result.stderr + did_config = do_config + if failed and not do_config: + # If our incremental build failed, try building again + # with a reconfig. + if self.builder.force_config_on_failure: + result, request_config = self.RunCommit(commit_upto, + brd, work_dir, True, True, False) + did_config = True + if not self.builder.force_reconfig: + do_config = request_config + + # If we built that commit, then config is done. But if we got + # an warning, reconfig next time to force it to build the same + # files that created warnings this time. Otherwise an + # incremental build may not build the same file, and we will + # think that the warning has gone away. + # We could avoid this by using -Werror everywhere... + # For errors, the problem doesn't happen, since presumably + # the build stopped and didn't generate output, so will retry + # that file next time. So we could detect warnings and deal + # with them specially here. For now, we just reconfigure if + # anything goes work. + # Of course this is substantially slower if there are build + # errors/warnings (e.g. 2-3x slower even if only 10% of builds + # have problems). + if (failed and not result.already_done and not did_config and + self.builder.force_config_on_failure): + # If this build failed, try the next one with a + # reconfigure. + # Sometimes if the board_config.h file changes it can mess + # with dependencies, and we get: + # make: *** No rule to make target `include/autoconf.mk', + # needed by `depend'. + do_config = True + force_build = True + else: + force_build = False + if self.builder.force_config_on_failure: + if failed: + do_config = True + result.commit_upto = commit_upto + if result.return_code < 0: + raise ValueError('Interrupt') + + # We have the build results, so output the result + self._WriteResult(result, job.keep_outputs) + self.builder.out_queue.put(result) + else: + # Just build the currently checked-out build + result, request_config = self.RunCommit(None, brd, work_dir, True, + True, self.builder.force_build_failures) + result.commit_upto = 0 + self._WriteResult(result, job.keep_outputs) + self.builder.out_queue.put(result) + + def run(self): + """Our thread's run function + + This thread picks a job from the queue, runs it, and then goes to the + next job. + """ + alive = True + while True: + job = self.builder.queue.get() + if self.builder.active and alive: + self.RunJob(job) + ''' + try: + if self.builder.active and alive: + self.RunJob(job) + except Exception as err: + alive = False + print err + ''' + self.builder.queue.task_done()