On 3/6/2024 12:07 PM, Aniket Limaye wrote:
Add the necessary configs required for OSPI functionality. Also update the ospi flash partition offsets as per the devicetree.
Signed-off-by: Aniket Limaye a-limaye@ti.com
configs/j7200_evm_a72_defconfig | 10 ++++++++-- configs/j7200_evm_r5_defconfig | 9 +++++++-- 2 files changed, 15 insertions(+), 4 deletions(-)
diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig index 2863472794..9ded9b2707 100644 --- a/configs/j7200_evm_a72_defconfig +++ b/configs/j7200_evm_a72_defconfig @@ -10,6 +10,8 @@ CONFIG_SOC_K3_J721E=y CONFIG_TARGET_J7200_A72_EVM=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000 +CONFIG_SF_DEFAULT_SPEED=25000000 +CONFIG_SF_DEFAULT_MODE=0 CONFIG_ENV_SIZE=0x20000 CONFIG_DM_GPIO=y CONFIG_SPL_DM_SPI=y @@ -61,7 +63,7 @@ CONFIG_SPL_RAM_DEVICE=y # CONFIG_SPL_SPI_FLASH_TINY is not set CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPL_SPI_LOAD=y -CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000 +CONFIG_SYS_SPI_U_BOOT_OFFS=0x300000 CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_SYS_MAXARGS=64 CONFIG_CMD_ASKENV=y @@ -141,7 +143,11 @@ CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y CONFIG_DM_SPI_FLASH=y -CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_SOFT_RESET=y +CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_S28HX_T=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_SPI_FLASH_MTD=y CONFIG_MULTIPLEXER=y diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig index 05eea55cfe..de5aaaece8 100644 --- a/configs/j7200_evm_r5_defconfig +++ b/configs/j7200_evm_r5_defconfig @@ -10,6 +10,8 @@ CONFIG_K3_EARLY_CONS=y CONFIG_TARGET_J7200_R5_EVM=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x41cf5bfc +CONFIG_SF_DEFAULT_SPEED=25000000 +CONFIG_SF_DEFAULT_MODE=0 CONFIG_ENV_SIZE=0x20000 CONFIG_DM_GPIO=y CONFIG_SPL_DM_SPI=y @@ -60,7 +62,7 @@ CONFIG_SPL_REMOTEPROC=y # CONFIG_SPL_SPI_FLASH_TINY is not set CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPL_SPI_LOAD=y -CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000 +CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_MAXARGS=64 @@ -117,7 +119,10 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_SFDP_SUPPORT=y -CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SOFT_RESET=y +CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_S28HX_T=y CONFIG_PINCTRL=y # CONFIG_PINCTRL_GENERIC is not set CONFIG_SPL_PINCTRL=y
Reviewed-by: Udit Kumar u-kumar1@ti.com