Hello!
Several times, I ran into troubles with the command parsing of U-Boot. Sometimes - especially if I had to do some simple corrections (backspace only, no delete, no cursor movements) the 'set xxx yyy) command doesn't get recognized. Sometimes some commands like 'run nfsboot' gets ignored - especially after a long time doing nothing (waiting on the prompt for i.e. >15min) (no bs used or any other compilcated editing was used). I just get another prompt. If I type it again, it works fine.
And, finally, due to some of these problems, I guess, I got now a duplicate environment variable:
-----8<--------------------------------------------------------------- U-Boot 1.1.2 (Oct 28 2004 - 14:02:56)
Freescale PowerPC Core: E500, Version: 2.0, (0x80200020) System: 8540, Version: 2.0, (0x80300020) Clocks: CPU: 825 MHz, CCB: 330 MHz, DDR: 165 MHz, LBC: 82 MHz L1 D-cache 32KB, L1 I-cache 32KB enabled. Board: MicroSys PM854 PCI1: 32 bit, 66 MHz (compiled) ... => pri ... stdin=serial stdout=serial stderr=serial bootfile=/mlinux.UB.T1 bootfile=/vmlinux.UB.T1
Environment size: 1084/8188 bytes => -----8<---------------------------------------------------------------
Any ideas, fixes, suggestions?