This board is still a non-generic board.
Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com Cc: Pantelis Antoniou panto@intracom.gr ---
arch/powerpc/cpu/mpc8xx/Kconfig | 4 - arch/powerpc/cpu/mpc8xx/scc.c | 20 -- board/netvia/Kconfig | 9 - board/netvia/MAINTAINERS | 7 - board/netvia/Makefile | 8 - board/netvia/flash.c | 495 ---------------------------------------- board/netvia/netvia.c | 401 -------------------------------- board/netvia/u-boot.lds.debug | 121 ---------- configs/NETVIA_V2_defconfig | 4 - configs/NETVIA_defconfig | 4 - doc/README.scrapyard | 1 + include/commproc.h | 33 --- include/configs/NETVIA.h | 435 ----------------------------------- include/status_led.h | 23 -- 14 files changed, 1 insertion(+), 1564 deletions(-) delete mode 100644 board/netvia/Kconfig delete mode 100644 board/netvia/MAINTAINERS delete mode 100644 board/netvia/Makefile delete mode 100644 board/netvia/flash.c delete mode 100644 board/netvia/netvia.c delete mode 100644 board/netvia/u-boot.lds.debug delete mode 100644 configs/NETVIA_V2_defconfig delete mode 100644 configs/NETVIA_defconfig delete mode 100644 include/configs/NETVIA.h
diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig index 4e67ff2..b510e1f 100644 --- a/arch/powerpc/cpu/mpc8xx/Kconfig +++ b/arch/powerpc/cpu/mpc8xx/Kconfig @@ -25,9 +25,6 @@ config TARGET_IVMS8 config TARGET_LWMON bool "Support lwmon"
-config TARGET_NETVIA - bool "Support NETVIA" - config TARGET_TQM823L bool "Support TQM823L"
@@ -71,7 +68,6 @@ source "board/esteem192e/Kconfig" source "board/ip860/Kconfig" source "board/ivm/Kconfig" source "board/lwmon/Kconfig" -source "board/netvia/Kconfig" source "board/tqc/tqm8xx/Kconfig"
endmenu diff --git a/arch/powerpc/cpu/mpc8xx/scc.c b/arch/powerpc/cpu/mpc8xx/scc.c index 01029ff..610fd78 100644 --- a/arch/powerpc/cpu/mpc8xx/scc.c +++ b/arch/powerpc/cpu/mpc8xx/scc.c @@ -448,26 +448,6 @@ static int scc_init (struct eth_device *dev, bd_t * bis) #error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined #endif
-#if defined(CONFIG_NETVIA) -#if defined(PA_ENET_PDN) - immr->im_ioport.iop_papar &= ~PA_ENET_PDN; - immr->im_ioport.iop_padir |= PA_ENET_PDN; - immr->im_ioport.iop_padat |= PA_ENET_PDN; -#elif defined(PB_ENET_PDN) - immr->im_cpm.cp_pbpar &= ~PB_ENET_PDN; - immr->im_cpm.cp_pbdir |= PB_ENET_PDN; - immr->im_cpm.cp_pbdat |= PB_ENET_PDN; -#elif defined(PC_ENET_PDN) - immr->im_ioport.iop_pcpar &= ~PC_ENET_PDN; - immr->im_ioport.iop_pcdir |= PC_ENET_PDN; - immr->im_ioport.iop_pcdat |= PC_ENET_PDN; -#elif defined(PD_ENET_PDN) - immr->im_ioport.iop_pdpar &= ~PD_ENET_PDN; - immr->im_ioport.iop_pddir |= PD_ENET_PDN; - immr->im_ioport.iop_pddat |= PD_ENET_PDN; -#endif -#endif - /* * Set the ENT/ENR bits in the GSMR Low -- Enable Transmit/Receive */ diff --git a/board/netvia/Kconfig b/board/netvia/Kconfig deleted file mode 100644 index 3e740e5..0000000 --- a/board/netvia/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_NETVIA - -config SYS_BOARD - default "netvia" - -config SYS_CONFIG_NAME - default "NETVIA" - -endif diff --git a/board/netvia/MAINTAINERS b/board/netvia/MAINTAINERS deleted file mode 100644 index 0313058..0000000 --- a/board/netvia/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -NETVIA BOARD -M: Pantelis Antoniou panto@intracom.gr -S: Maintained -F: board/netvia/ -F: include/configs/NETVIA.h -F: configs/NETVIA_defconfig -F: configs/NETVIA_V2_defconfig diff --git a/board/netvia/Makefile b/board/netvia/Makefile deleted file mode 100644 index b667bc9..0000000 --- a/board/netvia/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = netvia.o flash.o diff --git a/board/netvia/flash.c b/board/netvia/flash.c deleted file mode 100644 index 14888f8..0000000 --- a/board/netvia/flash.c +++ /dev/null @@ -1,495 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc8xx.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(vu_long * addr, flash_info_t * info); -static int write_byte(flash_info_t * info, ulong dest, uchar data); -static void flash_get_offsets(ulong base, flash_info_t * info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init(void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size; - int i; - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) - flash_info[i].flash_id = FLASH_UNKNOWN; - - size = flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", size, size << 20); - } - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000); - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br0 & ~(BR_BA_MSK)); - - /* Re-do sizing to get full correct info */ - size = flash_get_size((vu_long *) CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0]); - - flash_protect ( FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); - -#ifdef CONFIG_ENV_ADDR_REDUND - flash_protect ( FLAG_PROTECT_SET, - CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); -#endif - - - flash_info[0].size = size; - - return (size); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets(ulong base, flash_info_t * info) -{ - int i; - - /* set up sector start address table */ - if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000); - } - } else if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info(flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf("AMD "); - break; - case FLASH_MAN_FUJ: - printf("FUJITSU "); - break; - case FLASH_MAN_MX: - printf("MXIC "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: - printf("AM29LV040B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400B: - printf("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: - printf("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: - printf("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: - printf("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: - printf("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: - printf("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: - printf("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: - printf("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: - printf("Unknown Chip Type\n"); - break; - } - - printf(" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf("\n "); - printf(" %08lX%s", info->start[i], info->protect[i] ? " (RO)" : " "); - } - printf("\n"); -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size(vu_long * addr, flash_info_t * info) -{ - short i; - uchar mid; - uchar pid; - vu_char *caddr = (vu_char *) addr; - ulong base = (ulong) addr; - - - /* Write auto select command: read Manufacturer ID */ - caddr[0x0555] = 0xAA; - caddr[0x02AA] = 0x55; - caddr[0x0555] = 0x90; - - mid = caddr[0]; - switch (mid) { - case (AMD_MANUFACT & 0xFF): - info->flash_id = FLASH_MAN_AMD; - break; - case (FUJ_MANUFACT & 0xFF): - info->flash_id = FLASH_MAN_FUJ; - break; - case (MX_MANUFACT & 0xFF): - info->flash_id = FLASH_MAN_MX; - break; - case (STM_MANUFACT & 0xFF): - info->flash_id = FLASH_MAN_STM; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - pid = caddr[1]; /* device ID */ - switch (pid) { - case (AMD_ID_LV400T & 0xFF): - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 512 kB */ - - case (AMD_ID_LV400B & 0xFF): - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 512 kB */ - - case (AMD_ID_LV800T & 0xFF): - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (AMD_ID_LV800B & 0xFF): - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (AMD_ID_LV160T & 0xFF): - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (AMD_ID_LV160B & 0xFF): - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (AMD_ID_LV040B & 0xFF): - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; - - case (STM_ID_M29W040B & 0xFF): - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; - -#if 0 /* enable when device IDs are available */ - case (AMD_ID_LV320T & 0xFF): - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00400000; - break; /* => 4 MB */ - - case (AMD_ID_LV320B & 0xFF): - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00400000; - break; /* => 4 MB */ -#endif - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - printf(" "); - /* set up sector start address table */ - if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000); - } - } else if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection: D0 = 1 if protected */ - caddr = (volatile unsigned char *)(info->start[i]); - info->protect[i] = caddr[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - caddr = (vu_char *) info->start[0]; - - caddr[0x0555] = 0xAA; - caddr[0x02AA] = 0x55; - caddr[0x0555] = 0xF0; - - udelay(20000); - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase(flash_info_t * info, int s_first, int s_last) -{ - vu_char *addr = (vu_char *) (info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf("- missing\n"); - } else { - printf("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf("Can't erase unknown flash type %08lx - aborted\n", info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf("- Warning: %d protected sectors will not be erased!\n", prot); - } else { - printf("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - addr[0x0555] = 0x80; - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_char *) (info->start[sect]); - addr[0] = 0x30; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay(1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer(0); - last = start; - addr = (vu_char *) (info->start[l_sect]); - while ((addr[0] & 0x80) != 0x80) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc('.'); - last = now; - } - } - - DONE: - /* reset to read mode */ - addr = (vu_char *) info->start[0]; - addr[0] = 0xF0; /* reset bank */ - - printf(" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - int rc; - - while (cnt > 0) { - if ((rc = write_byte(info, addr++, *src++)) != 0) { - return (rc); - } - --cnt; - } - - return (0); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_byte(flash_info_t * info, ulong dest, uchar data) -{ - vu_char *addr = (vu_char *) (info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_char *) dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0xAA; - addr[0x02AA] = 0x55; - addr[0x0555] = 0xA0; - - *((vu_char *) dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer(0); - while ((*((vu_char *) dest) & 0x80) != (data & 0x80)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/netvia/netvia.c b/board/netvia/netvia.c deleted file mode 100644 index b3bbf47..0000000 --- a/board/netvia/netvia.c +++ /dev/null @@ -1,401 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Pantelis Antoniou, Intracom S.A., panto@intracom.gr - * U-Boot port on NetVia board - */ - -#include <common.h> -#include "mpc8xx.h" - -/****************************************************************/ - -#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 -/* last value written to the external register; we cannot read back */ -unsigned int last_er_val; -#endif - -/****************************************************************/ - -/****************************************************************/ - -/* some sane bit macros */ -#define _BD(_b) (1U << (31-(_b))) -#define _BDR(_l, _h) (((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1)) - -#define _BW(_b) (1U << (15-(_b))) -#define _BWR(_l, _h) (((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1)) - -#define _BB(_b) (1U << (7-(_b))) -#define _BBR(_l, _h) (((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1)) - -#define _B(_b) _BD(_b) -#define _BR(_l, _h) _BDR(_l, _h) - -/****************************************************************/ - -#define _NOT_USED_ 0xFFFFFFFF - -/****************************************************************/ - -#define CS_0000 0x00000000 -#define CS_0001 0x10000000 -#define CS_0010 0x20000000 -#define CS_0011 0x30000000 -#define CS_0100 0x40000000 -#define CS_0101 0x50000000 -#define CS_0110 0x60000000 -#define CS_0111 0x70000000 -#define CS_1000 0x80000000 -#define CS_1001 0x90000000 -#define CS_1010 0xA0000000 -#define CS_1011 0xB0000000 -#define CS_1100 0xC0000000 -#define CS_1101 0xD0000000 -#define CS_1110 0xE0000000 -#define CS_1111 0xF0000000 - -#define BS_0000 0x00000000 -#define BS_0001 0x01000000 -#define BS_0010 0x02000000 -#define BS_0011 0x03000000 -#define BS_0100 0x04000000 -#define BS_0101 0x05000000 -#define BS_0110 0x06000000 -#define BS_0111 0x07000000 -#define BS_1000 0x08000000 -#define BS_1001 0x09000000 -#define BS_1010 0x0A000000 -#define BS_1011 0x0B000000 -#define BS_1100 0x0C000000 -#define BS_1101 0x0D000000 -#define BS_1110 0x0E000000 -#define BS_1111 0x0F000000 - -#define A10_AAAA 0x00000000 -#define A10_AAA0 0x00200000 -#define A10_AAA1 0x00300000 -#define A10_000A 0x00800000 -#define A10_0000 0x00A00000 -#define A10_0001 0x00B00000 -#define A10_111A 0x00C00000 -#define A10_1110 0x00E00000 -#define A10_1111 0x00F00000 - -#define RAS_0000 0x00000000 -#define RAS_0001 0x00040000 -#define RAS_1110 0x00080000 -#define RAS_1111 0x000C0000 - -#define CAS_0000 0x00000000 -#define CAS_0001 0x00010000 -#define CAS_1110 0x00020000 -#define CAS_1111 0x00030000 - -#define WE_0000 0x00000000 -#define WE_0001 0x00004000 -#define WE_1110 0x00008000 -#define WE_1111 0x0000C000 - -#define GPL4_0000 0x00000000 -#define GPL4_0001 0x00001000 -#define GPL4_1110 0x00002000 -#define GPL4_1111 0x00003000 - -#define GPL5_0000 0x00000000 -#define GPL5_0001 0x00000400 -#define GPL5_1110 0x00000800 -#define GPL5_1111 0x00000C00 -#define LOOP 0x00000080 - -#define EXEN 0x00000040 - -#define AMX_COL 0x00000000 -#define AMX_ROW 0x00000020 -#define AMX_MAR 0x00000030 - -#define NA 0x00000008 - -#define UTA 0x00000004 - -#define TODT 0x00000002 - -#define LAST 0x00000001 - -const uint sdram_table[0x40] = { - /* RSS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0000 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ - CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, - - /* RBS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_1111 | A10_0001 | RAS_1111 | CAS_0001 | WE_1111 | AMX_COL | UTA, /* READ */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_0001 | BS_0001 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* WSS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, - CS_0000 | BS_0001 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL | UTA, - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA | TODT | LAST, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* WBS */ - CS_0001 | BS_1111 | A10_AAAA | RAS_0001 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* ACT */ - CS_1111 | BS_1111 | A10_0000 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_0001 | BS_0000 | A10_0000 | RAS_1111 | CAS_0001 | WE_0000 | AMX_COL, /* WRITE */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0000 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_1111 | BS_0001 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA, /* NOP */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL | UTA, /* PALL */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | UTA | TODT | LAST, /* NOP */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* UPT */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, /* NOP */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_0001 | WE_1111 | AMX_COL | LOOP, - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL, - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | LOOP, - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | LAST, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, - - /* EXC */ - CS_0001 | BS_1111 | A10_1111 | RAS_0001 | CAS_1111 | WE_0001 | AMX_COL, - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1111 | AMX_COL | TODT | LAST, - - /* REG */ - CS_1111 | BS_1111 | A10_1111 | RAS_1111 | CAS_1111 | WE_1110 | AMX_MAR, - CS_0001 | BS_1111 | A10_0001 | RAS_0001 | CAS_0001 | WE_0001 | AMX_MAR | TODT | LAST, -}; - -/* ------------------------------------------------------------------------- */ - - -/* - * Check Board Identity: - * - * Test ETX ID string (ETX_xxx...) - * - * Return 1 always. - */ - -int checkboard(void) -{ -#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1 - printf ("NETVIA v1\n"); -#else - printf ("NETVIA v2+\n"); -#endif - return (0); -} - -/* ------------------------------------------------------------------------- */ - -/* 0xC8 = 0b11001000 , CAS3, >> 2 = 0b00 11 0 010 */ -#define MAR_SDRAM_INIT 0x000000C8LU - -#define MCR_OP(x) ((unsigned long)((x) & 3) << (31-1)) -#define MCR_OP_MASK MCR_OP(3) - -#define MCR_UM(x) ((unsigned long)((x) & 1) << (31 - 8)) -#define MCR_UM_MASK MCR_UM(1) -#define MCR_UM_UPMA MCR_UM(0) -#define MCR_UM_UPMB MCR_UM(1) - -#define MCR_MB(x) ((unsigned long)((x) & 7) << (31 - 18)) -#define MCR_MB_MASK MCR_MB(7) -#define MCR_MB_CS(x) MCR_MB(x) - -#define MCR_MCLF(x) ((unsigned long)((x) & 15) << (31 - 23)) -#define MCR_MCLF_MASK MCR_MCLF(15) - -phys_size_t initdram(int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size; - - upmconfig(UPMA, (uint *) sdram_table, sizeof(sdram_table) / sizeof(uint)); - - /* - * Preliminary prescaler for refresh - */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K; - - memctl->memc_mar = MAR_SDRAM_INIT; /* 32-bit address to be output on the address bus if AMX = 0b11 */ - - /* - * Map controller bank 3 to the SDRAM bank at preliminary address. - */ - memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; - memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; - - memctl->memc_mamr = CONFIG_SYS_MAMR_9COL & ~MAMR_PTAE; /* no refresh yet */ - - udelay(200); - - /* perform SDRAM initialisation sequence */ - memctl->memc_mcr = MCR_OP_RUN | MCR_UM_UPMA | MCR_MB_CS3 | MCR_MCLF(1) | MCR_MAD(0x3C); /* precharge all */ - udelay(1); - memctl->memc_mcr = MCR_OP_RUN | MCR_UM_UPMA | MCR_MB_CS3 | MCR_MCLF(0) | MCR_MAD(0x30); /* refresh 16 times(0) */ - udelay(1); - memctl->memc_mcr = MCR_OP_RUN | MCR_UM_UPMA | MCR_MB_CS3 | MCR_MCLF(1) | MCR_MAD(0x3E); /* exception program (write mar) */ - udelay(1); - - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - - udelay(1000); - - memctl->memc_mamr = CONFIG_SYS_MAMR_9COL; - - size = SDRAM_MAX_SIZE; - - udelay(10000); - - return (size); -} - -/* ------------------------------------------------------------------------- */ - -int misc_init_r(void) -{ -#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 - last_er_val = 0xffffffff; -#endif - return(0); -} - -/* ------------------------------------------------------------------------- */ - -/* GP = general purpose, SP = special purpose (on chip peripheral) */ - -/* bits that can have a special purpose or can be configured as inputs/outputs */ -#define PA_GP_INMASK 0 -#define PA_GP_OUTMASK (_BW(5) | _BWR(14, 15)) -#define PA_SP_MASK (_BW(4) | _BWR(6, 13)) -#define PA_ODR_VAL 0 -#define PA_GP_OUTVAL _BW(5) -#define PA_SP_DIRVAL 0 - -#define PB_GP_INMASK _B(28) -#define PB_GP_OUTMASK (_BR(16, 19) | _BR(26, 27) | _BR(29, 31)) -#define PB_SP_MASK _BR(22, 25) -#define PB_ODR_VAL 0 -#define PB_GP_OUTVAL (_BR(16, 19) | _BR(26, 27) | _BR(29, 31)) -#define PB_SP_DIRVAL 0 - -#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1 - -#define PC_GP_INMASK (_BWR(5, 7) | _BWR(9, 10) | _BW(13)) -#define PC_GP_OUTMASK _BW(12) -#define PC_SP_MASK (_BW(4) | _BW(8)) -#define PC_SOVAL 0 -#define PC_INTVAL 0 -#define PC_GP_OUTVAL 0 -#define PC_SP_DIRVAL 0 - -#define PD_GP_INMASK 0 -#define PD_GP_OUTMASK _BWR(3, 15) -#define PD_SP_MASK 0 -#define PD_GP_OUTVAL (_BW(3) | _BW(5) | _BW(7) | _BWR(8, 15)) -#define PD_SP_DIRVAL 0 - -#elif CONFIG_NETVIA_VERSION >= 2 - -#define PC_GP_INMASK (_BW(5) | _BW(7) | _BWR(9, 11) | _BWR(13, 15)) -#define PC_GP_OUTMASK (_BW(6) | _BW(12)) -#define PC_SP_MASK (_BW(4) | _BW(8)) -#define PC_SOVAL 0 -#define PC_INTVAL _BW(7) -#define PC_GP_OUTVAL (_BW(6) | _BW(12)) -#define PC_SP_DIRVAL 0 - -#define PD_GP_INMASK 0 -#define PD_GP_OUTMASK _BWR(3, 15) -#define PD_SP_MASK 0 -#define PD_GP_OUTVAL (_BW(3) | _BW(5) | _BW(9) | _BW(11)) -#define PD_SP_DIRVAL 0 - -#else -#error Unknown NETVIA board version. -#endif - -int board_early_init_f(void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile iop8xx_t *ioport = &immap->im_ioport; - volatile cpm8xx_t *cpm = &immap->im_cpm; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - /* DSP0 chip select */ - memctl->memc_or4 = ((0xFFFFFFFFLU & ~(DSP_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_ACS_DIV2 | OR_SETA | OR_TRLX); - memctl->memc_br4 = ((DSP0_BASE & BR_BA_MSK) | BR_PS_16 | BR_V); - - /* DSP1 chip select */ - memctl->memc_or5 = ((0xFFFFFFFFLU & ~(DSP_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_ACS_DIV2 | OR_SETA | OR_TRLX); - memctl->memc_br5 = ((DSP1_BASE & BR_BA_MSK) | BR_PS_16 | BR_V); - - /* FPGA chip select */ - memctl->memc_or6 = ((0xFFFFFFFFLU & ~(FPGA_SIZE - 1)) | OR_BI | OR_SCY_1_CLK); - memctl->memc_br6 = ((FPGA_BASE & BR_BA_MSK) | BR_PS_8 | BR_V); - -#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 - /* NAND chip select */ - memctl->memc_or1 = ((0xFFFFFFFFLU & ~(NAND_SIZE - 1)) | OR_CSNT_SAM | OR_BI | OR_SCY_8_CLK | OR_EHTR | OR_TRLX); - memctl->memc_br1 = ((NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V); - - /* kill this chip select */ - memctl->memc_br2 &= ~BR_V; /* invalid */ - - /* external reg chip select */ - memctl->memc_or7 = ((0xFFFFFFFFLU & ~(ER_SIZE - 1)) | OR_BI | OR_SCY_4_CLK); - memctl->memc_br7 = ((ER_BASE & BR_BA_MSK) | BR_PS_32 | BR_V); -#endif - - ioport->iop_padat = PA_GP_OUTVAL; - ioport->iop_paodr = PA_ODR_VAL; - ioport->iop_padir = PA_GP_OUTMASK | PA_SP_DIRVAL; - ioport->iop_papar = PA_SP_MASK; - - cpm->cp_pbdat = PB_GP_OUTVAL; - cpm->cp_pbodr = PB_ODR_VAL; - cpm->cp_pbdir = PB_GP_OUTMASK | PB_SP_DIRVAL; - cpm->cp_pbpar = PB_SP_MASK; - - ioport->iop_pcdat = PC_GP_OUTVAL; - ioport->iop_pcdir = PC_GP_OUTMASK | PC_SP_DIRVAL; - ioport->iop_pcso = PC_SOVAL; - ioport->iop_pcint = PC_INTVAL; - ioport->iop_pcpar = PC_SP_MASK; - - ioport->iop_pddat = PD_GP_OUTVAL; - ioport->iop_pddir = PD_GP_OUTMASK | PD_SP_DIRVAL; - ioport->iop_pdpar = PD_SP_MASK; - -#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 - /* external register init */ - *(volatile uint *)ER_BASE = 0xFFFFFFFF; -#endif - - return 0; -} diff --git a/board/netvia/u-boot.lds.debug b/board/netvia/u-boot.lds.debug deleted file mode 100644 index 5bbf1c5..0000000 --- a/board/netvia/u-boot.lds.debug +++ /dev/null @@ -1,121 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/configs/NETVIA_V2_defconfig b/configs/NETVIA_V2_defconfig deleted file mode 100644 index 2715910..0000000 --- a/configs/NETVIA_V2_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="NETVIA_VERSION=2" -CONFIG_PPC=y -CONFIG_8xx=y -CONFIG_TARGET_NETVIA=y diff --git a/configs/NETVIA_defconfig b/configs/NETVIA_defconfig deleted file mode 100644 index 27c8f2b..0000000 --- a/configs/NETVIA_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="NETVIA_VERSION=1" -CONFIG_PPC=y -CONFIG_8xx=y -CONFIG_TARGET_NETVIA=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 1e475af..6b391df 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +NETVIA powerpc mpc8xx - - Pantelis Antoniou panto@intracom.gr R360MPI powerpc mpc8xx - - Wolfgang Denk wd@denx.de RRvision powerpc mpc8xx - - Wolfgang Denk wd@denx.de SPD823TS powerpc mpc8xx - - Wolfgang Denk wd@denx.de diff --git a/include/commproc.h b/include/commproc.h index 38e4e7d..8de0d15 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -594,39 +594,6 @@ typedef struct scc_enet { #define SICR_ENET_CLKRT ((uint)0x00250000) #endif /* CONFIG_KM8XX */
-/*** NETVIA *******************************************************/ - -#if defined(CONFIG_NETVIA) -/* Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC2 use. - */ -#define PROFF_ENET PROFF_SCC2 -#define CPM_CR_ENET CPM_CR_CH_SCC2 -#define SCC_ENET 1 -#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ -#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ -#define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */ -#define PA_ENET_TCLK ((ushort)0x0800) /* PA 4 */ - -#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1 -# define PB_ENET_PDN ((ushort)0x4000) /* PB 17 */ -#elif CONFIG_NETVIA_VERSION >= 2 -# define PC_ENET_PDN ((ushort)0x0008) /* PC 12 */ -#endif - -#define PB_ENET_TENA ((ushort)0x2000) /* PB 18 */ - -#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ -#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ - -/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to - * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. - */ -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00002f00) - -#endif /* CONFIG_NETVIA */ - /*** MVS1, TQM823L/M, TQM850L/M, TQM885D, R360MPI **********/
#if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \ diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h deleted file mode 100644 index 4a0fa9e..0000000 --- a/include/configs/NETVIA.h +++ /dev/null @@ -1,435 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Pantelis Antoniou, Intracom S.A., panto@intracom.gr - * U-Boot port on NetVia board - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC850 1 /* This is a MPC850 CPU */ -#define CONFIG_NETVIA 1 /* ...on a NetVia board */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1 -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#else -#define CONFIG_8xx_CONS_NONE -#define CONFIG_MAX3100_SERIAL -#endif - -#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ - -#define CONFIG_XIN 10000000 -#define CONFIG_8xx_GCLK_FREQ 80000000 - -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#undef CONFIG_CLOCKS_IN_MHZ /* clocks NOT passsed to Linux in MHz */ - -#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "tftpboot; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ - -#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 -#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ -#endif - -#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_NISDOMAIN - - -#undef CONFIG_MAC_PARTITION -#undef CONFIG_DOS_PARTITION - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING - -#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 -/* #define CONFIG_CMD_NAND */ /* disabled */ -#endif - - -#define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_MISC_INIT_R - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#if defined(DEBUG) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 8 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x10000 - -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000) -#define CONFIG_ENV_SIZE 0x4000 - -#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + 0x70000) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#ifndef CONFIG_CAN_DRIVER -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC) -#else /* we must activate GPL5 in the SIUMCR for CAN */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_FRC) -#endif /* CONFIG_CAN_DRIVER */ - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - * - *----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ - -#define SCCR_MASK SCCR_EBDF11 - -#if CONFIG_8xx_GCLK_FREQ == 50000000 - -#define CONFIG_SYS_PLPRCR ( ((5 - 1) << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) -#define CONFIG_SYS_SCCR (SCCR_TBS | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) - -#elif CONFIG_8xx_GCLK_FREQ == 80000000 - -#define CONFIG_SYS_PLPRCR ( ((8 - 1) << PLPRCR_MF_SHIFT) | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) -#define CONFIG_SYS_SCCR (SCCR_TBS | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00 | SCCR_EBDF01) - -#endif - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/*#define CONFIG_SYS_DER 0x2002000F*/ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - -/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | OR_SCY_5_CLK | OR_TRLX) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V ) - -/* - * BR3 and OR3 (SDRAM) - * - */ -#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM | OR_G5LS) - -#define CONFIG_SYS_OR3_PRELIM ((0xFFFFFFFFLU & ~(SDRAM_MAX_SIZE - 1)) | CONFIG_SYS_OR_TIMING_SDRAM) -#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_PS_32 | BR_V) - -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 208 - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ - -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* Ethernet at SCC2 */ -#define CONFIG_SCC2_ENET - -/****************************************************************/ - -#define DSP_SIZE 0x00010000 /* 64K */ -#define FPGA_SIZE 0x00010000 /* 64K */ - -#define DSP0_BASE 0xF1000000 -#define DSP1_BASE (DSP0_BASE + DSP_SIZE) -#define FPGA_BASE (DSP1_BASE + DSP_SIZE) - -#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 - -#define ER_SIZE 0x00010000 /* 64K */ -#define ER_BASE (FPGA_BASE + FPGA_SIZE) - -#define NAND_SIZE 0x00010000 /* 64K */ -#define NAND_BASE (ER_BASE + ER_SIZE) - -#endif - -/****************************************************************/ - -#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 - -#define STATUS_LED_BIT 0x00000001 /* bit 31 */ -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_STATE STATUS_LED_BLINKING - -#define STATUS_LED_BIT1 0x00000002 /* bit 30 */ -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) -#define STATUS_LED_STATE1 STATUS_LED_OFF - -#define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ -#define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - -#endif - - -/*****************************************************************************/ - -#ifndef __ASSEMBLY__ - -#if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 - -/* LEDs */ - -/* last value written to the external register; we cannot read back */ -extern unsigned int last_er_val; - -/* led_id_t is unsigned long mask */ -typedef unsigned int led_id_t; - -static inline void __led_init(led_id_t mask, int state) -{ - unsigned int new_er_val; - - if (state) - new_er_val = last_er_val & ~mask; - else - new_er_val = last_er_val | mask; - - *(volatile unsigned int *)ER_BASE = new_er_val; - last_er_val = new_er_val; -} - -static inline void __led_toggle(led_id_t mask) -{ - unsigned int new_er_val; - - new_er_val = last_er_val ^ mask; - *(volatile unsigned int *)ER_BASE = new_er_val; - last_er_val = new_er_val; -} - -static inline void __led_set(led_id_t mask, int state) -{ - unsigned int new_er_val; - - if (state) - new_er_val = last_er_val & ~mask; - else - new_er_val = last_er_val | mask; - - *(volatile unsigned int *)ER_BASE = new_er_val; - last_er_val = new_er_val; -} - -/* MAX3100 console */ -#define MAX3100_SPI_RXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) -#define MAX3100_SPI_RXD_BIT 0x00000008 - -#define MAX3100_SPI_TXD_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) -#define MAX3100_SPI_TXD_BIT 0x00000004 - -#define MAX3100_SPI_CLK_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_pbdat) -#define MAX3100_SPI_CLK_BIT 0x00000002 - -#define MAX3100_CS_PORT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) -#define MAX3100_CS_BIT 0x0010 - -#endif - -#endif - -/*************************************************************************************************/ - -#endif /* __CONFIG_H */ diff --git a/include/status_led.h b/include/status_led.h index 1feeff5..919e3ae 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -122,29 +122,6 @@ void status_led_set (int led, int state); * filling this file up with lots of custom board stuff. */
-/***** NetVia ********************************************************/ -#elif defined(CONFIG_NETVIA) - -#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1 - -#define STATUS_LED_PAR im_ioport.iop_pdpar -#define STATUS_LED_DIR im_ioport.iop_pddir -#undef STATUS_LED_ODR -#define STATUS_LED_DAT im_ioport.iop_pddat - -# define STATUS_LED_BIT 0x0080 /* PD.8 */ -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE STATUS_LED_BLINKING - -# define STATUS_LED_BIT1 0x0040 /* PD.9 */ -# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE1 STATUS_LED_OFF - -# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ -# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - -#endif - /***** CMI ********************************************************/ #elif defined(CONFIG_CMI) # define STATUS_LED_DIR im_mios.mios_mpiosm32ddr