Enable support to update the board via the DFU protocol and make it possible to export the block devices via USB mass storage protocol.
This will not work out of the box, yet. You have to change the dr_mode of the usb0 controller to peripheral manually to make it work. True, OTG support will hopefully coming soon.
Signed-off-by: Michael Walle michael@walle.cc --- configs/kontron_sl28_defconfig | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig index 5b3ba58d39..0da31a4e54 100644 --- a/configs/kontron_sl28_defconfig +++ b/configs/kontron_sl28_defconfig @@ -39,12 +39,14 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x230000 CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y CONFIG_CMD_NVEDIT_EFI=y +CONFIG_CMD_DFU=y CONFIG_CMD_DM=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_CACHE=y CONFIG_CMD_EFIDEBUG=y CONFIG_CMD_RNG=y @@ -90,9 +92,12 @@ CONFIG_FSL_DSPI=y CONFIG_NXP_FSPI=y CONFIG_USB=y # CONFIG_SPL_DM_USB is not set +CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y # CONFIG_USB_XHCI_FSL is not set CONFIG_USB_DWC3=y CONFIG_USB_DWC3_LAYERSCAPE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_OF_LIBFDT_ASSUME_MASK=0x0 CONFIG_OF_LIBFDT_OVERLAY=y