Hi Nikhil,
On Wednesday 20 February 2008, Nikhil Gautam wrote:
Below is the most of my init.S file. You are correct about the faulting location. But I can see in the init.S file that this address location is defined as "AC_R|AC_W|AC_X|SA_G" so I think I should be able to at least read it.
I suggest that you look at the TLB setup with the BDI2000 when U-Boot is up and running, before trying to dump the last 4k from U-Boot:
=> tlb 0 63
This will show you the currently configured TLB's.
When I boot from 256Mb NAND flash, I don't see this problem. Its only when I boot from 1Gb NAND flash.
And 1Gb is large page, right?
Best regards, Stefan
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de =====================================================================