Clear the forced powerdown bit in the UTMIP_PLL_CFG2_0 register which brings USB2 in UTMI mode to work. This was clearly missing since the forced powerdown bit is set in reset by default for all USB ports.
Acked-by: Stephen Warren swarren@nvidia.com Signed-off-by: Stefan Agner stefan@agner.ch --- drivers/usb/host/ehci-tegra.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 0b42aa5..20e9297 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -461,6 +461,9 @@ static int init_utmi_usb_controller(struct fdt_usb *config) if (config->periph_id == PERIPH_ID_USBD) clrbits_le32(&clkrst->crc_utmip_pll_cfg2, UTMIP_FORCE_PD_SAMP_A_POWERDOWN); + if (config->periph_id == PERIPH_ID_USB2) + clrbits_le32(&clkrst->crc_utmip_pll_cfg2, + UTMIP_FORCE_PD_SAMP_B_POWERDOWN); if (config->periph_id == PERIPH_ID_USB3) clrbits_le32(&clkrst->crc_utmip_pll_cfg2, UTMIP_FORCE_PD_SAMP_C_POWERDOWN);