"Alexander Povolotsky" pevnev@juno.com wrote:
Does it mean that a minimal ramdisk image ramdisk_image.zip "for first tests" for 82xx, which I have downloaded from:
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/SIMPLE-PPCBOOT-ramdisk
This link is strange for me. For 82xx, pls try: ftp://ftp.denx.de/pub/LinuxPPC/usr/src/SELF/images/ppc_82xx/ramdisk_image.gz
could be programmed directly onto flash (bypassing putting it into ram first and then copying it into flash) using CodeWarrior/WireTap CCS's "Flash Programmer" tool into next 8 sectors, starting from address 0xFFF80000 ?
Yeah, this is one possibel. The rule is that except U-Boot image and it's environment parameters location, you can program RMADISK anywhere except kernel home in FLASH.
Aternatively - if I am to strictly follow steps outlined in DULG/Manual: 7.6. "Standalone Operation with Ramdisk Image" I am not clear on addresses used there ?
My "normal" (without ramdisk) booting sequence is: => tftpboot 200000 uimage => bootm 200000
So what addresses I should use in:
=> tftp "/tftpboot/SIMPLE-PPCBOOT-ramdisk"
Just 't 100000 SIMPLE-PPCBOOT-ramdisk' is enough for download it to RAM.
=> cp.b
cp.b 100000 <Your-RAMDISK-Location> $(filesize)
and
=> bootm
Pls set U-Boot boot command as required before the debug. Like: =>set flash_self 'run ramargs addip; bootm $(kernel_addr) $(ramdisk_addr) =>set ramargs 'setenv bootargs console=tty0 console=ttyS0,9600 root=/dev/ram rw
Then just type: => run flash_self
Yeah, you need program linux kernel to FLASH as $(kernel_addr) in this way. Or what does mean Standalone Operation, anyway?
Best regards,
Sam
_________________________________________________________ Do You Yahoo!? 150万曲MP3疯狂搜，带您闯入音乐殿堂 http://music.yisou.com/ 美女明星应有尽有，搜遍美图、艳图和酷图 http://image.yisou.com 1G就是1000兆，雅虎电邮自助扩容！ http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/event/mail_1...