[U-Boot-Users] U-boot for 8245 boards

Hi,

I am trying to port U-boot to a customised 8245 board . For the Initial bring up , I am using a working U-Boot for another very similar board. The problem is that, using BDI 2000 debugger , The telnet Interface reports it to be at reset address fff0 0100 all the time and no amount of ti or go works When I use gdb it also reports it to be stuck there and a step command results in gdb reporting that a stop signal received . I tried setting break points ahead but no use.

The BDI set-up is working as i tried it with working image of vxWorks loader bootrom.

Am I missing anything in u-boot compilation or anything to BDI to work or some problem with the code. Please illuminate...

Thanks Abhishek