
Hi Tom,
Migrate the users of CONFIG_SYS_BOOTCOUNT_ADDR to Kconfig. We can provide a default for BOOTCOUNT_AM33XX as that's a specific part of the RTC in use. We can also provide a default for ARCH_LS1043A and ARCH_LS1021A as they had been previously calculated and their symbols are in Kconfig. In the case of other QE-enabled platforms, they are not so we must update the relevant defconfig files. The previous default only applied in some cases, even on a specific SoC family.
Thanks for your patch.
I suppose, that it is a last puzzle to convert BOOTCOUNT to Kconfig.
Please correct me if I'm wrong, but it shall be applied on top of Alex's series:
http://patchwork.ozlabs.org/cover/874539/
Reviewed-by: Lukasz Majewski lukma@denx.de
Signed-off-by: Tom Rini trini@konsulko.com
configs/calimain_defconfig | 1 + configs/dh_imx6_defconfig | 1 + configs/ge_b450v3_defconfig | 1 + configs/ge_b650v3_defconfig | 1 + configs/ge_b850v3_defconfig | 1 + configs/highbank_defconfig | 1 + configs/ids8313_defconfig | 1 + configs/kmcoge4_defconfig | 1 + configs/kmcoge5ne_defconfig | 1 + configs/kmeter1_defconfig | 1 + configs/kmlion1_defconfig | 1 + configs/kmopti2_defconfig | 1 + configs/kmsupx5_defconfig | 1 + configs/kmtegr1_defconfig | 1 + configs/kmtepr2_defconfig | 1 + configs/kmvect1_defconfig | 1 + configs/mx53ppd_defconfig | 1 + configs/socfpga_is1_defconfig | 1 + configs/socfpga_sr1500_defconfig | 1 + configs/suvd3_defconfig | 1 + configs/tqma6s_wru4_mmc_defconfig | 1 + configs/tuge1_defconfig | 1 + configs/tuxx1_defconfig | 1 + configs/x600_defconfig | 1 + drivers/bootcount/Kconfig | 6 ++++-- drivers/bootcount/bootcount.c | 16 ---------------- include/configs/brppt1.h | 3 --- include/configs/calimain.h | 1 - include/configs/dh_imx6.h | 1 - include/configs/ge_bx50v3.h | 2 -- include/configs/highbank.h | 1 - include/configs/ids8313.h | 3 --- include/configs/km/kmp204x-common.h | 3 --- include/configs/socfpga_is1.h | 2 -- include/configs/socfpga_sr1500.h | 2 -- include/configs/ti_am335x_common.h | 7 ------- include/configs/tqma6_wru4.h | 1 - include/configs/x600.h | 4 ---- 38 files changed, 28 insertions(+), 48 deletions(-)
diff --git a/configs/calimain_defconfig b/configs/calimain_defconfig index cbb31f6bf321..234b1a593567 100644 --- a/configs/calimain_defconfig +++ b/configs/calimain_defconfig @@ -23,6 +23,7 @@ CONFIG_CMD_DIAG=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTP_DNS=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_ADDR=0x01C23000 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_SYS_NS16550=y diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig index 251fcd01b69a..2b4fe9c2c596 100644 --- a/configs/dh_imx6_defconfig +++ b/configs/dh_imx6_defconfig @@ -35,6 +35,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_DWC_AHSATA=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_ADDR=0x00900000 CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y diff --git a/configs/ge_b450v3_defconfig b/configs/ge_b450v3_defconfig index ee1cc432e0e0..045380b6de8e 100644 --- a/configs/ge_b450v3_defconfig +++ b/configs/ge_b450v3_defconfig @@ -29,6 +29,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_EXT=y CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5" +CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000 CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y diff --git a/configs/ge_b650v3_defconfig b/configs/ge_b650v3_defconfig index 27a89b0be782..9d4b8aeebedc 100644 --- a/configs/ge_b650v3_defconfig +++ b/configs/ge_b650v3_defconfig @@ -29,6 +29,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_EXT=y CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5" +CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000 CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y diff --git a/configs/ge_b850v3_defconfig b/configs/ge_b850v3_defconfig index af4ba9754331..94785681be7d 100644 --- a/configs/ge_b850v3_defconfig +++ b/configs/ge_b850v3_defconfig @@ -29,6 +29,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_EXT=y CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5" +CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000 CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y diff --git a/configs/highbank_defconfig b/configs/highbank_defconfig index 7b9c0e7d4770..55f83ed1e17c 100644 --- a/configs/highbank_defconfig +++ b/configs/highbank_defconfig @@ -17,6 +17,7 @@ CONFIG_ENV_IS_IN_NVRAM=y CONFIG_SCSI_AHCI=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y +CONFIG_SYS_BOOTCOUNT_ADDR=0xfff3cf0c # CONFIG_MMC is not set CONFIG_SCSI=y CONFIG_OF_LIBFDT=y diff --git a/configs/ids8313_defconfig b/configs/ids8313_defconfig index 5ca77030104f..44b411cc5932 100644 --- a/configs/ids8313_defconfig +++ b/configs/ids8313_defconfig @@ -36,6 +36,7 @@ CONFIG_BOOTP_HOSTNAME=y CONFIG_BOOTP_SUBNETMASK=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_I2C=y +CONFIG_SYS_BOOTCOUNT_ADDR=0x9 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y CONFIG_PHYLIB=y diff --git a/configs/kmcoge4_defconfig b/configs/kmcoge4_defconfig index fe731dc3c76d..9d22c211a37e 100644 --- a/configs/kmcoge4_defconfig +++ b/configs/kmcoge4_defconfig @@ -35,6 +35,7 @@ CONFIG_BOOTP_BOOTPATH=y CONFIG_BOOTP_GATEWAY=y CONFIG_BOOTP_HOSTNAME=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_ADDR=0xFB000020 # CONFIG_MMC is not set CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/kmcoge5ne_defconfig b/configs/kmcoge5ne_defconfig index c360d06a1e42..3426adf5981b 100644 --- a/configs/kmcoge5ne_defconfig +++ b/configs/kmcoge5ne_defconfig @@ -28,6 +28,7 @@ CONFIG_BOOTP_BOOTPATH=y CONFIG_BOOTP_GATEWAY=y CONFIG_BOOTP_HOSTNAME=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_ADDR=0xE011BFF8 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/kmeter1_defconfig b/configs/kmeter1_defconfig index 3e9ba80e9961..e795ac40d182 100644 --- a/configs/kmeter1_defconfig +++ b/configs/kmeter1_defconfig @@ -27,6 +27,7 @@ CONFIG_BOOTP_BOOTPATH=y CONFIG_BOOTP_GATEWAY=y CONFIG_BOOTP_HOSTNAME=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_ADDR=0xE011BFF8 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/kmlion1_defconfig b/configs/kmlion1_defconfig index 9d4f3d7395a5..12c06cc54486 100644 --- a/configs/kmlion1_defconfig +++ b/configs/kmlion1_defconfig @@ -35,6 +35,7 @@ CONFIG_BOOTP_BOOTPATH=y CONFIG_BOOTP_GATEWAY=y CONFIG_BOOTP_HOSTNAME=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_ADDR=0xFB000020 # CONFIG_MMC is not set CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y diff --git a/configs/kmopti2_defconfig b/configs/kmopti2_defconfig index 484804ab0c3c..f3babb6a7e57 100644 --- a/configs/kmopti2_defconfig +++ b/configs/kmopti2_defconfig @@ -27,6 +27,7 @@ CONFIG_BOOTP_BOOTPATH=y CONFIG_BOOTP_GATEWAY=y CONFIG_BOOTP_HOSTNAME=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/kmsupx5_defconfig b/configs/kmsupx5_defconfig index 0a82ca344736..ac3f336204db 100644 --- a/configs/kmsupx5_defconfig +++ b/configs/kmsupx5_defconfig @@ -27,6 +27,7 @@ CONFIG_BOOTP_BOOTPATH=y CONFIG_BOOTP_GATEWAY=y CONFIG_BOOTP_HOSTNAME=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/kmtegr1_defconfig b/configs/kmtegr1_defconfig index 1b2d3df78593..a5930ef6a764 100644 --- a/configs/kmtegr1_defconfig +++ b/configs/kmtegr1_defconfig @@ -29,6 +29,7 @@ CONFIG_BOOTP_BOOTPATH=y CONFIG_BOOTP_GATEWAY=y CONFIG_BOOTP_HOSTNAME=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/kmtepr2_defconfig b/configs/kmtepr2_defconfig index c3dcf86e32f4..7441e4a888cc 100644 --- a/configs/kmtepr2_defconfig +++ b/configs/kmtepr2_defconfig @@ -27,6 +27,7 @@ CONFIG_BOOTP_BOOTPATH=y CONFIG_BOOTP_GATEWAY=y CONFIG_BOOTP_HOSTNAME=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/kmvect1_defconfig b/configs/kmvect1_defconfig index 0dc165e31297..b415c9d2030f 100644 --- a/configs/kmvect1_defconfig +++ b/configs/kmvect1_defconfig @@ -28,6 +28,7 @@ CONFIG_BOOTP_BOOTPATH=y CONFIG_BOOTP_GATEWAY=y CONFIG_BOOTP_HOSTNAME=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig index 8fb512651f5a..f4a0b9b639ff 100644 --- a/configs/mx53ppd_defconfig +++ b/configs/mx53ppd_defconfig @@ -25,6 +25,7 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_EXT=y CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="0:5" +CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000 CONFIG_NETDEVICES=y CONFIG_RTC_S35392A=y CONFIG_USB=y diff --git a/configs/socfpga_is1_defconfig b/configs/socfpga_is1_defconfig index 4da9356baf68..53b5c34fd4c1 100644 --- a/configs/socfpga_is1_defconfig +++ b/configs/socfpga_is1_defconfig @@ -34,6 +34,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_ADDR=0xfffffff8 CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y diff --git a/configs/socfpga_sr1500_defconfig b/configs/socfpga_sr1500_defconfig index bdc12e4a6af9..d7df688f5012 100644 --- a/configs/socfpga_sr1500_defconfig +++ b/configs/socfpga_sr1500_defconfig @@ -38,6 +38,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_ADDR=0xfffffff8 CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y diff --git a/configs/suvd3_defconfig b/configs/suvd3_defconfig index c75c8022408b..0213101d2fbf 100644 --- a/configs/suvd3_defconfig +++ b/configs/suvd3_defconfig @@ -27,6 +27,7 @@ CONFIG_BOOTP_BOOTPATH=y CONFIG_BOOTP_GATEWAY=y CONFIG_BOOTP_HOSTNAME=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/tqma6s_wru4_mmc_defconfig b/configs/tqma6s_wru4_mmc_defconfig index b6f5974fd49f..995a1ced0f5e 100644 --- a/configs/tqma6s_wru4_mmc_defconfig +++ b/configs/tqma6s_wru4_mmc_defconfig @@ -34,6 +34,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_ENV_IS_IN_MMC=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_ADDR=0x00900000 CONFIG_LED_STATUS=y CONFIG_LED_STATUS0=y CONFIG_LED_STATUS_BIT=0 diff --git a/configs/tuge1_defconfig b/configs/tuge1_defconfig index 262a5c54793c..278d35ae61a5 100644 --- a/configs/tuge1_defconfig +++ b/configs/tuge1_defconfig @@ -27,6 +27,7 @@ CONFIG_BOOTP_BOOTPATH=y CONFIG_BOOTP_GATEWAY=y CONFIG_BOOTP_HOSTNAME=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/tuxx1_defconfig b/configs/tuxx1_defconfig index a2c101e275a0..6414ac29364b 100644 --- a/configs/tuxx1_defconfig +++ b/configs/tuxx1_defconfig @@ -27,6 +27,7 @@ CONFIG_BOOTP_BOOTPATH=y CONFIG_BOOTP_GATEWAY=y CONFIG_BOOTP_HOSTNAME=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8 # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y # CONFIG_PCI is not set diff --git a/configs/x600_defconfig b/configs/x600_defconfig index d1711e01fd45..b63bf41c2452 100644 --- a/configs/x600_defconfig +++ b/configs/x600_defconfig @@ -38,6 +38,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:64M(ubi0),64M(ubi1)" CONFIG_CMD_UBI=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_BOOTCOUNT_ADDR=0xD2801FF8 CONFIG_FPGA_XILINX=y CONFIG_SYS_I2C_DW=y # CONFIG_MMC is not set diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig index c41b1316cd09..73972b7f9c37 100644 --- a/drivers/bootcount/Kconfig +++ b/drivers/bootcount/Kconfig @@ -111,8 +111,10 @@ config SYS_BOOTCOUNT_EXT_NAME
config SYS_BOOTCOUNT_ADDR hex "RAM address used for reading and writing the boot counter"
- default 0x7000A000
- depends on BOOTCOUNT_EXT
- default 0x44E3E000 if BOOTCOUNT_AM33XX
- default 0xE0115FF8 if ARCH_LS1043A || ARCH_LS1021A
- depends on BOOTCOUNT_AM33XX || BOOTCOUNT_GENERIC ||
BOOTCOUNT_EXT || \
help Set the address used for reading and writing the bootBOOTCOUNT_I2C
counter. diff --git a/drivers/bootcount/bootcount.c b/drivers/bootcount/bootcount.c index 8b499fe12861..67554fa4a9b8 100644 --- a/drivers/bootcount/bootcount.c +++ b/drivers/bootcount/bootcount.c @@ -8,22 +8,7 @@ #include <bootcount.h> #include <linux/compiler.h>
-/*
- Only override CONFIG_SYS_BOOTCOUNT_ADDR if not already defined.
This
- way, some boards can define it directly in their config header.
- */
-#if !defined(CONFIG_SYS_BOOTCOUNT_ADDR)
-#if defined(CONFIG_QE) -#include <linux/immap_qe.h> -#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_IMMR + 0x110000
- \
QE_MURAM_SIZE - 2 *
sizeof(u32)) -#endif /* defined(CONFIG_QE) */
-#endif /* !defined(CONFIG_SYS_BOOTCOUNT_ADDR) */
/* Now implement the generic default functions */ -#if defined(CONFIG_SYS_BOOTCOUNT_ADDR) __weak void bootcount_store(ulong a) { void *reg = (void *)CONFIG_SYS_BOOTCOUNT_ADDR; @@ -54,4 +39,3 @@ __weak ulong bootcount_load(void) return raw_bootcount_load(reg); #endif /* defined(CONFIG_SYS_BOOTCOUNT_SINGLEWORD) */ } -#endif /* defined(CONFIG_SYS_BOOTCOUNT_ADDR) */ diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h index 30ea2d22e894..02e989ad7ad0 100644 --- a/include/configs/brppt1.h +++ b/include/configs/brppt1.h @@ -20,9 +20,6 @@ #define CONFIG_LCD_DT_SIMPLEFB #define LCD_BPP LCD_COLOR32
-/* Bootcount using the RTC block */ -#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
/* memory */ #define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024)
diff --git a/include/configs/calimain.h b/include/configs/calimain.h index 854dc1ffedf0..364066feb21b 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -274,7 +274,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (0x8001ff00)
#define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */ -#define CONFIG_SYS_BOOTCOUNT_ADDR DAVINCI_RTC_BASE #ifndef __ASSEMBLY__ int calimain_get_osc_freq(void); diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h index 1f7fccad3fbc..abe393e44c94 100644 --- a/include/configs/dh_imx6.h +++ b/include/configs/dh_imx6.h @@ -42,7 +42,6 @@ #define CONFIG_SYS_MALLOC_LEN (4 * SZ_1M)
/* Bootcounter */ -#define CONFIG_SYS_BOOTCOUNT_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_BOOTCOUNT_BE
/* FEC ethernet */ diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index e4673d812dc2..cbfe30d536d0 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -263,6 +263,4 @@
#define CONFIG_BCH
-#define CONFIG_SYS_BOOTCOUNT_ADDR 0x7000A000
#endif /* __GE_BX50V3_CONFIG_H */ diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 0aa59bcafde1..785cad7762e9 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -25,7 +25,6 @@ #define CONFIG_CONS_INDEX 0
#define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */ -#define CONFIG_SYS_BOOTCOUNT_ADDR 0xfff3cf0c
#define CONFIG_MISC_INIT_R #define CONFIG_SCSI_AHCI_PLAT diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 12c3aff4166d..a4acaa65b2d5 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -508,9 +508,6 @@ /* UBI Support */ #define CONFIG_MTD_PARTITIONS
-/* bootcount support */ -#define CONFIG_SYS_BOOTCOUNT_ADDR 0x9
#define CONFIG_IMAGE_FORMAT_LEGACY
#endif /* __CONFIG_H */ diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 7f735e0ac67e..f49f4361204f 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -188,9 +188,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_QRIO_BR_PRELIM /* QRIO Base Address */ #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_QRIO_OR_PRELIM /* QRIO Options */ -/* bootcounter in QRIO */ -#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_QRIO_BASE + 0x20) - #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ #define CONFIG_MISC_INIT_F #define CONFIG_MISC_INIT_R diff --git a/include/configs/socfpga_is1.h b/include/configs/socfpga_is1.h index f2c3f405549a..88f9d4a46d07 100644 --- a/include/configs/socfpga_is1.h +++ b/include/configs/socfpga_is1.h @@ -30,8 +30,6 @@ /*
- Bootcounter
*/ -/* last 2 lwords in OCRAM */ -#define CONFIG_SYS_BOOTCOUNT_ADDR 0xfffffff8 #define CONFIG_SYS_BOOTCOUNT_BE
#endif /* __CONFIG_SOCFPGA_IS1_H__ */ diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h index 8879817b3020..492869bd37f6 100644 --- a/include/configs/socfpga_sr1500.h +++ b/include/configs/socfpga_sr1500.h @@ -29,8 +29,6 @@ /*
- Bootcounter
*/ -/* last 2 lwords in OCRAM */ -#define CONFIG_SYS_BOOTCOUNT_ADDR 0xfffffff8 #define CONFIG_SYS_BOOTCOUNT_BE
/* Environment setting for SPI flash */ diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index 6c93fd3f9b6f..8251ceb63fa0 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -38,13 +38,6 @@
#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ /*
- RTC related defines. To use bootcount you must set bootlimit in
the
- environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT
- in the board config.
- */
-#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000
-/*
- SPL related defines. The Public RAM memory map the ROM defines
the
- area between 0x402F0400 and 0x4030B800 as a download area and
- 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also
diff --git a/include/configs/tqma6_wru4.h b/include/configs/tqma6_wru4.h index d94f790148dc..24b62e701c10 100644 --- a/include/configs/tqma6_wru4.h +++ b/include/configs/tqma6_wru4.h @@ -34,7 +34,6 @@ /* LED */
/* Bootcounter */ -#define CONFIG_SYS_BOOTCOUNT_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_BOOTCOUNT_BE
#endif /* __CONFIG_TQMA6_WRU4_H */ diff --git a/include/configs/x600.h b/include/configs/x600.h index 4bf8b1051e58..485522cd8729 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -116,10 +116,6 @@ #define CONFIG_SYS_MALLOC_LEN (8 << 20) #define CONFIG_SYS_LOAD_ADDR 0x00800000
-/* Use last 2 lwords in internal SRAM for bootcounter */ -#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SRAM_BASE + \
CONFIG_SRAM_SIZE)
#define CONFIG_HOSTNAME x600 #define CONFIG_UBI_PART ubi0 #define CONFIG_UBIFS_VOLUME rootfs
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de