On Wed, 1 Jul 2020 at 20:11, Vladimir Oltean olteanv@gmail.com wrote:
Hi Zhiqiang,
On Wed, 1 Jul 2020 at 20:05, Zhiqiang Hou Zhiqiang.Hou@nxp.com wrote:
From: Hou Zhiqiang Zhiqiang.Hou@nxp.com
This patch set depends on: https://patchwork.ozlabs.org/project/uboot/patch/20200503185227.28731-2-olte...
Hou Zhiqiang (16): net: fsl_mdio: Change to use virtual address net: fsl_mdio: Correct the MII management register block address net: tsec: convert to use DM_MDIO when DM_ETH enabled net: tsec: Add fixed-link PHY support net: tsec: Add the compatible string "gianfar" support powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r() configs: p1_p2_rdb: Add the default address of vsc7385 firmware dts: powerpc: p1020rdb: Add eTSEC DT nodes powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled configs: P1020RDB: Enable DM_ETH config dts: powerpc: p1010rdb: Add eTSEC DT nodes powerpc: p1010rdb: Compile legacy ethernet init function when no DM_ETH configs: P1010RDB: Enable DM_ETH config dts: powerpc: p2020rdb: Add eTSEC DT nodes configs: P2020RDB: Enable DM_ETH config
arch/powerpc/cpu/mpc8xxx/cpu.c | 2 + arch/powerpc/dts/p1010rdb-pa.dts | 1 + arch/powerpc/dts/p1010rdb-pa_36b.dts | 1 + arch/powerpc/dts/p1010rdb.dtsi | 50 +++++++++++++++ arch/powerpc/dts/p1010si-post.dtsi | 25 ++++++++ arch/powerpc/dts/p1020-post.dtsi | 20 +++++- arch/powerpc/dts/p1020rdb-pc.dts | 1 + arch/powerpc/dts/p1020rdb-pc.dtsi | 55 ++++++++++++++++ arch/powerpc/dts/p1020rdb-pc_36b.dts | 1 + arch/powerpc/dts/p1020rdb-pd.dts | 45 ++++++++++++++ arch/powerpc/dts/p2020-post.dtsi | 10 ++- arch/powerpc/dts/p2020rdb-pc.dts | 1 + arch/powerpc/dts/p2020rdb-pc.dtsi | 50 +++++++++++++++ arch/powerpc/dts/p2020rdb-pc_36b.dts | 1 + arch/powerpc/dts/pq3-etsec1-0.dtsi | 28 +++++++++ arch/powerpc/dts/pq3-etsec1-1.dtsi | 28 +++++++++ arch/powerpc/dts/pq3-etsec1-2.dtsi | 28 +++++++++ arch/powerpc/dts/pq3-etsec1-3.dtsi | 28 +++++++++ arch/powerpc/dts/pq3-etsec2-0.dtsi | 35 +++++++++++ arch/powerpc/dts/pq3-etsec2-1.dtsi | 35 +++++++++++ arch/powerpc/dts/pq3-etsec2-2.dtsi | 35 +++++++++++ arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi | 16 +++++ arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi | 16 +++++ arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi | 16 +++++ board/freescale/p1010rdb/p1010rdb.c | 2 + board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 37 ++++++----- configs/P1010RDB-PA_36BIT_NAND_defconfig | 2 + configs/P1010RDB-PA_36BIT_NOR_defconfig | 2 + configs/P1010RDB-PA_36BIT_SDCARD_defconfig | 2 + configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig | 2 + configs/P1010RDB-PA_NAND_defconfig | 2 + configs/P1010RDB-PA_NOR_defconfig | 2 + configs/P1010RDB-PA_SDCARD_defconfig | 2 + configs/P1010RDB-PA_SPIFLASH_defconfig | 2 + configs/P1010RDB-PB_36BIT_NAND_defconfig | 2 + configs/P1010RDB-PB_36BIT_NOR_defconfig | 2 + configs/P1010RDB-PB_36BIT_SDCARD_defconfig | 2 + configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig | 2 + configs/P1010RDB-PB_NAND_defconfig | 2 + configs/P1010RDB-PB_NOR_defconfig | 2 + configs/P1010RDB-PB_SDCARD_defconfig | 2 + configs/P1010RDB-PB_SPIFLASH_defconfig | 2 + configs/P1020RDB-PC_36BIT_NAND_defconfig | 3 + configs/P1020RDB-PC_36BIT_SDCARD_defconfig | 3 + configs/P1020RDB-PC_36BIT_SPIFLASH_defconfig | 3 + configs/P1020RDB-PC_36BIT_defconfig | 3 + configs/P1020RDB-PC_NAND_defconfig | 3 + configs/P1020RDB-PC_SDCARD_defconfig | 3 + configs/P1020RDB-PC_SPIFLASH_defconfig | 3 + configs/P1020RDB-PC_defconfig | 3 + configs/P1020RDB-PD_NAND_defconfig | 3 + configs/P1020RDB-PD_SDCARD_defconfig | 3 + configs/P1020RDB-PD_SPIFLASH_defconfig | 3 + configs/P1020RDB-PD_defconfig | 3 + configs/P2020RDB-PC_36BIT_NAND_defconfig | 3 + configs/P2020RDB-PC_36BIT_SDCARD_defconfig | 3 + configs/P2020RDB-PC_36BIT_SPIFLASH_defconfig | 3 + configs/P2020RDB-PC_36BIT_defconfig | 3 + configs/P2020RDB-PC_NAND_defconfig | 3 + configs/P2020RDB-PC_SDCARD_defconfig | 3 + configs/P2020RDB-PC_SPIFLASH_defconfig | 3 + configs/P2020RDB-PC_defconfig | 3 + doc/device-tree-bindings/net/fsl-tsec-phy.txt | 2 +- drivers/net/fsl_mdio.c | 28 +++++++-- drivers/net/tsec.c | 62 ++++++++----------- include/configs/p1_p2_rdb_pc.h | 2 + include/fsl_mdio.h | 4 ++ include/tsec.h | 4 ++ 68 files changed, 698 insertions(+), 63 deletions(-) create mode 100644 arch/powerpc/dts/p1020rdb-pc.dtsi create mode 100644 arch/powerpc/dts/p2020rdb-pc.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec1-0.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec1-1.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec1-2.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec1-3.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec2-0.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec2-1.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec2-2.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-0.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-1.dtsi create mode 100644 arch/powerpc/dts/pq3-etsec2-grp2-2.dtsi
-- 2.25.1
The point with the Acked-by/Reviewed-by/Tested-by tags is that you copy them to your next patch submissions, such that the maintainers see which patches have had eyes on them already, so that they don't need to look through them again.
Thanks, -Vladimir
I'm sorry, please ignore this. I thought none of the patches have the Reviewed-by tag I added, but looks like those are in fact all the patches that I did review. Time to review the rest!
Thanks, -Vladimir