Dear Jack,
In message 3DFFB0670A395946974CE996C72073241BAEEC34@NDHMC4SXCH.gdc4s.com you wrote:
I need to support a JFFS2 file system in u-boot. My plan is to boot from uboot using mtd device and update any new images (field software upgrade) from the linux side.
Are you sure you really want to do this? JFFS2 is far from being th optimal file system for most usage cases. You might want to check other options, like YAFFS or, in case of NAND memory, especially UBI / UBIFS.
How can I add support for jffs2 in u-boot. Currently my u-boot bootloader does not support jffs2. What do I need to do to add this support?
JFFS2 support has been available in U-Boot for many years. Just enable it.
This message and/or attachments may include information subject to GDC4S O.M. 1.8.6 and GD Corporate Policy 07-105 and are intended to be accessed only by authorized recipients. Use, storage and transmission are governed by General Dynamics and its policies. Contractual restrictions apply to third parties. Recipients should refer to the policies or contract to determine proper handling. Unauthorized review, use, disclosure or distribution is prohibited. If you are not an intended recipient, please contact the sender and destroy all copies of the original message.
Make sure to omit such crap when posting to public mailing lists.
[What a nonsense! "destroy all copies". Heh. "Run for cover! Deletion of the Internet starting in 3 minutes!"]
Best regards,
Wolfgang Denk