Add some U-Boot-specific settings. These should really go in the *u-boot.dtsi file, but it seems that rk3399 does not use that yet.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v2: None
arch/arm/dts/rk3399-gru-bob.dts | 1 + arch/arm/dts/rk3399-gru-chromebook.dtsi | 1 + arch/arm/dts/rk3399-gru.dtsi | 21 +++++++++++++++++---- 3 files changed, 19 insertions(+), 4 deletions(-)
diff --git a/arch/arm/dts/rk3399-gru-bob.dts b/arch/arm/dts/rk3399-gru-bob.dts index 1ee0dc0d9f..0e3d91fc28 100644 --- a/arch/arm/dts/rk3399-gru-bob.dts +++ b/arch/arm/dts/rk3399-gru-bob.dts @@ -7,6 +7,7 @@
/dts-v1/; #include "rk3399-gru-chromebook.dtsi" +#include "rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi"
/ { model = "Google Bob"; diff --git a/arch/arm/dts/rk3399-gru-chromebook.dtsi b/arch/arm/dts/rk3399-gru-chromebook.dtsi index ff81dfda3b..c6495adcca 100644 --- a/arch/arm/dts/rk3399-gru-chromebook.dtsi +++ b/arch/arm/dts/rk3399-gru-chromebook.dtsi @@ -232,6 +232,7 @@ &edp { status = "okay";
+ rockchip,panel = <&edp_panel>; ports { edp_out: port@1 { reg = <1>; diff --git a/arch/arm/dts/rk3399-gru.dtsi b/arch/arm/dts/rk3399-gru.dtsi index 7cc9b2642b..df19263acc 100644 --- a/arch/arm/dts/rk3399-gru.dtsi +++ b/arch/arm/dts/rk3399-gru.dtsi @@ -11,7 +11,13 @@
/ { chosen { + u-boot,dm-pre-reloc; stdout-path = "serial2:115200n8"; + u-boot,spl-boot-order = &spi_flash; + }; + + config { + u-boot,spl-payload-offset = <0x40000>; };
/* @@ -539,12 +545,14 @@ ap_i2c_audio: &i2c8 {
&spi1 { status = "okay"; + u-boot,dm-pre-reloc;
pinctrl-names = "default", "sleep"; pinctrl-1 = <&spi1_sleep>;
- spiflash@0 { - compatible = "jedec,spi-nor"; + spi_flash: spiflash@0 { + u-boot,dm-pre-reloc; + compatible = "jedec,spi-nor", "spi-flash"; reg = <0>;
/* May run faster once verified. */ @@ -558,12 +566,16 @@ ap_i2c_audio: &i2c8 {
&spi5 { status = "okay"; + spi-activate-delay = <100>; + spi-max-frequency = <3000000>; + spi-deactivate-delay = <200>;
cros_ec: ec@0 { compatible = "google,cros-ec-spi"; reg = <0>; interrupt-parent = <&gpio0>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + ec-interrupt = <&gpio0 1 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ec_ap_int_l>; spi-max-frequency = <3000000>; @@ -618,6 +630,7 @@ ap_i2c_audio: &i2c8 {
&uart2 { status = "okay"; + u-boot,dm-pre-reloc; };
&usb_host0_ohci { @@ -650,8 +663,8 @@ ap_i2c_audio: &i2c8 { status = "okay"; };
-#include <arm/cros-ec-keyboard.dtsi> -#include <arm/cros-ec-sbs.dtsi> +#include <cros-ec-keyboard.dtsi> +#include <cros-ec-sbs.dtsi>
&pinctrl { /*