-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Steve Sakoman Sent: Saturday, November 06, 2010 8:35 AM To: Nishanth Menon Cc: u-boot@lists.denx.de; Koen Kooi Subject: Re: [U-Boot] [PATCH] ARMV7: OMAP3: BeagleBoard: add xM rev B to ID table
[snip]
Note that for 36xx my patch sets the max to 720 -- this is because mainline/linux-omap currently does not support 1000. We can adjust that when kernel support for 1000 appears.
[sp] 720MHz is not a valid frequency for 36x. It is the highest freq for OMAP35x - subject to associated bit set in the silicon. 600MHz would be be safe for all OMAP35x family processors.
For 36xx, the freq should be 800MHz (if you don't want 1GHz).
[snip]