Hi Fabio,
On 24.06.20 22:29, Fabio Estevam wrote:
Hi Soeren,
On Wed, Jun 24, 2020 at 5:13 PM Soeren Moch smoch@web.de wrote:
Schematics are at https://www.tbsdtv.com/download/document/tbs2910/TBS2910-Matrix-ARM-mini-PC-...
Here is another patch for you to try: https://pastebin.com/raw/Dkipgq1n
Still no luck:
U-Boot 2020.07-rc5-00039-g4ff63383e3-dirty (Jun 24 2020 - 22:36:43 +0200)
CPU: Freescale i.MX6Q rev1.2 at 792MHz CPU: Commercial temperature grade (0C to 95C) at 47C Reset cause: POR Model: TBS2910 Matrix ARM mini PC DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK No panel detected: default to HDMI Display: HDMI (1024x768) In: serial Out: vga Err: vga Net: eth0: ethernet@2188000 PCI: PCI: pcie phy link never came up No such bus starting USB... Bus usb@2184000: usb dr_mode not found Bus usb@2184200: USB EHCI 1.00 scanning bus usb@2184000 for devices... 1 USB Device(s) found scanning bus usb@2184200 for devices... 4 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 Matrix U-Boot> dhcp BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 BOOTP broadcast 7 BOOTP broadcast 8 BOOTP broadcast 9 BOOTP broadcast 10 BOOTP broadcast 11 BOOTP broadcast 12 BOOTP broadcast 13 BOOTP broadcast 14 BOOTP broadcast 15 BOOTP broadcast 16 BOOTP broadcast 17
Retry time exceeded; starting again Matrix U-Boot> mdio list FEC0: 4 - AR8035 <--> ethernet@2188000 Matrix U-Boot>