On 08/20/2015 01:52 AM, Marcel Ziswiler wrote:
Enable early TPS6586X PMIC rail configuration setting SM0 being VDD_CORE_1.2V to 1.2 volts and SM1 being VDD_CPU_1.0V to 1.0 volts.
While those are PMIC power-up defaults the SoC might have been reset separately with certain rails being left at lower DVFS states which is e.g. the case upon watchdog reset while otherwise nearly idling.
This fixes an issue being stuck in U-Boot's SPL upon watchdog reset (e.g. running downstream L4T Linux kernel as there exists no mainline Tegra20 watchdog driver as of yet).
Rather than enable this with yet another CONFIG_ option, perhaps we can put this code into a C file dedicated to the colibri_t20 board, and then have the common code call it (and implement a weak function that does nothing to satisfy the linker on other boards).