Re: [U-Boot-Users] u-boot for SC32442B

tangwei <tziang <at> hotmail.com> writes:

dear ,all

Hi Tangwei

I have a board use S3C2442B43 (400MHz, 64MB mSDRAM, 128MB Nand), and there is no flash or other memory,so have to use the nand boot, is there someone have done something for this, please give me some advices, thanks.

Booting from NAND flash usually requires some special provisions as code can not directly be executed from it. Have a look at nand_spl and its documentation in doc/README.nand-boot-ppc440 describing the process applicable to PowerPC SOCs. As I don't know much about the S3C2442B I can't give you any concrete advice there, but you will have to find out from its documentation whether and what its NAND booting provisions are.

Cheers

Marcel