Re: [U-Boot-Users] das u-boot and disc on chip

Wolfgang Denk schrieb:

I'm not exactly sure what you mean by "boot device". It is no problem

In this case the part of the board design which appears at address 0x00 of lh7a404 after reset.

You would have to write your own separate bootstrap loader then. IMHO this is not woth the trouble.

Yes, shouldn't be. Initialise ram, move and jump.

I'm quite new to this arm and embedded linux stuff and played a bit with a kev7a400 board and a patched u-boot-0.45 and now I will use das u-boot with a 2.6-kernel on a small lh7a404-design with mentioned DoC and some sdram and several io's

Any hint or doc-pointer on adaption of das u-boot to this lh7a404 soc? As it is a SoC, there shouldn't be much board-specific stuff to be done for a boot-loader.

Regards,