Hi,
On 17/03/20 1:48 am, Rasmus Villemoes wrote:
I have a board for which doing "sf erase 0x100000 0x80000" consistently causes the external watchdog circuit to reset the board. Make sure to pet the watchdog during slow operations such as erasing or writing large areas of a spi nor flash.
Signed-off-by: Rasmus Villemoes rasmus.villemoes@prevas.dk
drivers/mtd/spi/spi-nor-core.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c index 4076646225..b7f7aa7b28 100644 --- a/drivers/mtd/spi/spi-nor-core.c +++ b/drivers/mtd/spi/spi-nor-core.c @@ -20,6 +20,7 @@ #include <linux/mtd/spi-nor.h> #include <spi-mem.h> #include <spi.h> +#include <watchdog.h>
#include "sf_internal.h"
@@ -399,6 +400,7 @@ static int spi_nor_ready(struct spi_nor *nor) { int sr, fsr;
- WATCHDOG_RESET();
Is it necessary to reset watchdog for every status register read? How small is the timeout? Resetting too often will impact performance depending on overhead of this call.
Is it not sufficient to reset watchdog once per page write (in spi_nor_write()) and once per sector erase (in spi_nor_erase())?
sr = spi_nor_sr_ready(nor); if (sr < 0) return sr;
Regards Vignesh