Am 02.12.2018 um 10:33 schrieb Frank Wunderlich:
can you give me an example how to download and display it, seems i only have tftpboot which runs kernel directly?
also found no strings-command in https://www.denx.de/wiki/DULG/Manual
=> tftp ${loadaddr} 192.168.1.1:list.txt Speed: 100, full duplex Using ethernet@ff702000 device TFTP from server 192.168.1.1; our IP address is 192.168.1.101 Filename 'list.txt'. Load address: 0x1000000 Loading: # 12.7 KiB/s done Bytes transferred = 158 (9e hex) => strings ${loadaddr} 9e dhcppkgstyle.xsl dhcpstyle.xsl favicon.ico index.html ldlinux.c32 list.txt mini.iso netboot.tar.gz pxelinux.0 pxelinux.cfg RJ45_5.JPG RJ45_52.JPG ã(Ðå =>
The 'strings' command has to be enabled under "Command line interface" -> "Memory commands". It helps to show the contents, but not really for scripting...
Simon
Frank
Gesendet: Montag, 19. November 2018 um 12:29 Uhr Von: "Simon Goldschmidt" simon.k.r.goldschmidt@gmail.com An: "Frank Wunderlich" frank-w@public-files.de Cc: "U-Boot Mailing List" u-boot@lists.denx.de Betreff: Re: Re: [U-Boot] list files on tftp / large kernel-image
On Wed, Nov 14, 2018 at 4:52 PM Frank Wunderlich frank-w@public-files.de wrote:
Hi Simon, thanks for fast answer
i hope mediatek release ethernet soon (i know it's a more complex driver for r2 than the other 18 patches ), than i can drop the old uboot ;)
for list tftp, it seems to be a protocol limitation. here https://unix.stackexchange.com/questions/76400/download-directory-structure-... the server creates a textfile...this can be a workaround
can i download (to memory) and display it (without writing it)? i only have loaded kernel and executed it's address. I don't know how to print a "Textfile" (if it's in memory i need to know it's size and print this "data block"). maybe there is a way to load the data directly to an env-var
Have you tried the 'strings' command? Is that enough?
Simon