Hi Simon,
I applied the V5 patches on the latest u-boot-samsung tree and need seem to compile fine. Yes I will need to rebase them once the MMC patches get in, but will wait for comments from Minkyu Kang as well so that I can incorporate them and rebase the patch set once the MMC patches get in.
Regards, Rajeshwari Shinde.
On Sat, May 11, 2013 at 11:48 PM, Simon Glass sjg@chromium.org wrote:
HI Rajeshwari,
On Wed, Apr 3, 2013 at 5:54 AM, Rajeshwari Shinde rajeshwari.s@samsung.com wrote:
This patch adds support for gpio pin numbering support on EXYNOS5250 To have consistent 0..n-1 GPIO numbering the banks are divided into different parts where ever they have holes in them.
Signed-off-by: Leela Krishna Amudala l.krishna@samsung.com Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com
Changes in V2: - none. Changes in V3: - none. Changes in V4: - To have consistent 0..n-1 GPIO numbering the banks are divided into different parts where ever they have holes in them. - Combined previous patch 1 and 2 into single patch. Changes in V5: - Removed Exynos5 specific code in gpio driver api to get bank. - Added #define HAVE_GENERIC_GPIO in config file to remove conditinal CPU check in gpio driver.
With this series I am getting errors in exynos5-dt.c:
25: EXYNOS5: Add gpio pin numbering feature arm: + snow +exynos5-dt.c: In function 'board_usb_vbus_init': +exynos5-dt.c:79: error: 'struct exynos5_gpio_part1' has no member named 'x2' +exynos5-dt.c: In function 'board_enable_audio_codec': +exynos5-dt.c:95: error: 'struct exynos5_gpio_part1' has no member named 'x1' +exynos5-dt.c:96: error: 'struct exynos5_gpio_part1' has no member named 'x1' +exynos5-dt.c: In function 'exynos_cfg_lcd_gpio': +exynos5-dt.c:412: error: 'struct exynos5_gpio_part1' has no member named 'x1' +exynos5-dt.c:413: error: 'struct exynos5_gpio_part1' has no member named 'x1' +exynos5-dt.c:416: error: 'struct exynos5_gpio_part1' has no member named 'x0'
This is probably due to new support added, so I think you need to adjust your patch.
Here is the sequence I am testing with (reverse order of application):
9529fd4 (HEAD, ws/snow, snow) EXYNOS5: GPIO: Enable GPIO Command for EXYNOS5 0f81b33 S5P: Rename GPIO definitions 0c6254b EXYNOS5: Add gpio pin numbering feature 5a35ef9 CONFIG: EXYNOS5: Enable silent console 6083f4f S5P: Serial: Add fdt support to driver 2f78e0f EXYNOS5: FDT: Add serial device node values 5b85902 EXYNOS5: FDT: Add compatible strings for Serial 6402856 exynos: dts: Use 50MHz SPI flash speed on snow 1a6900e EXYNOS: SPL: Add a custom spi copy function 27530a7 EXYNOS: SPI: Support word transfers 7f8ba96 EXYNOS: SPI: Minimise access to SPI FIFO level 149742a EXYNOS: SPI: Support a delay after deactivate f3d8caf EXYNOS: Export timer_get_us() to get microsecond timer 1aaa266 EXYNOS: SPI: Support SPI_PREAMBLE mode 2752d08 SPI: Add support for preamble bytes 279a5cb exynos: Enable mmc for snow a6280ba COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition 19425ea SMDK5250: Enable EMMC booting 5253ae0 MMC: APIs to support resize of EMMC boot partition 15bb05e SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT eeef540 EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. a4d8bf2 EXYNOS5: DWMMC: Added FDT support for DWMMC 71b87c4 DWMMC: Initialise dwmci and resolve EMMC read write issues 97c6565 EXYNOS5: FDT: Add DWMMC device node data ec5fb8b FDT: Add compatible string for DWMMC e7c528b EXYNOS5: I2C: Add FDT and non-FDT support for I2C
Regards, Simon
arch/arm/cpu/armv7/exynos/pinmux.c | 150 ++++------ arch/arm/include/asm/arch-exynos/cpu.h | 10 +- arch/arm/include/asm/arch-exynos/gpio.h | 452 +++++++++++++++++++++++++++---- board/samsung/smdk5250/smdk5250.c | 24 +- drivers/gpio/s5p_gpio.c | 42 +++ include/configs/exynos5250-dt.h | 1 + 6 files changed, 522 insertions(+), 157 deletions(-)
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot