The same code is run for both SDHCI_QUIRK_32BIT_DMA_ADDR and define(CONFIG_FIXED_SDHCI_ALIGNED_BUFFER).
Unify the code.
Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---
Changes in v2: None
drivers/mmc/sdhci.c | 22 ++++++++-------------- include/sdhci.h | 2 ++ 2 files changed, 10 insertions(+), 14 deletions(-)
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 18fbcb5f1864..b4713e7b9bba 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -140,27 +140,16 @@ static void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data, sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
if (host->flags & USE_SDMA) { - if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && - (host->start_addr & 0x7) != 0x0) { + if (host->force_align_buffer || + (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR && + (host->start_addr & 0x7) != 0x0)) { *is_aligned = 0; host->start_addr = (unsigned long)host->align_buffer; if (data->flags != MMC_DATA_READ) memcpy(host->align_buffer, data->src, trans_bytes); } - -#if defined(CONFIG_FIXED_SDHCI_ALIGNED_BUFFER) - /* - * Always use this bounce-buffer when - * CONFIG_FIXED_SDHCI_ALIGNED_BUFFER is defined - */ - *is_aligned = 0; - host->start_addr = (unsigned long)host->align_buffer; - if (data->flags != MMC_DATA_READ) - memcpy(host->align_buffer, data->src, trans_bytes); -#endif sdhci_writel(host, host->start_addr, SDHCI_DMA_ADDRESS); - } else if (host->flags & (USE_ADMA | USE_ADMA64)) { sdhci_prepare_adma_table(host, data);
@@ -627,6 +616,11 @@ static int sdhci_init(struct mmc *mmc)
#if defined(CONFIG_FIXED_SDHCI_ALIGNED_BUFFER) host->align_buffer = (void *)CONFIG_FIXED_SDHCI_ALIGNED_BUFFER; + /* + * Always use this bounce-buffer when CONFIG_FIXED_SDHCI_ALIGNED_BUFFER + * is defined. + */ + host->force_align_buffer = true; #else if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) { host->align_buffer = memalign(8, 512 * 1024); diff --git a/include/sdhci.h b/include/sdhci.h index 1358218270b8..7f8feefa450b 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -9,6 +9,7 @@ #ifndef __SDHCI_HW_H #define __SDHCI_HW_H
+#include <linux/types.h> #include <asm/io.h> #include <mmc.h> #include <asm/gpio.h> @@ -322,6 +323,7 @@ struct sdhci_host {
struct mmc_config cfg; void *align_buffer; + bool force_align_buffer; dma_addr_t start_addr; int flags; #define USE_SDMA (0x1 << 0)