From: Takahiro Kuwano Takahiro.Kuwano@infineon.com
In Infineon multi-die package parts, we need to use Read Any Register op to read status register in 2nd or further die. Infineon S28HS02GT is dual-die package and supports Octal DTR interface. To support this, spansion_read_any_reg() needs to be reworked. Implementation is similar to existing read_sr() that already supports Octal DTR mode.
Signed-off-by: Takahiro Kuwano Takahiro.Kuwano@infineon.com --- drivers/mtd/spi/spi-nor-core.c | 34 +++++++++++++++++++++++++++++----- 1 file changed, 29 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c index 2f0f24a41ee9..b7f0f3343dd4 100644 --- a/drivers/mtd/spi/spi-nor-core.c +++ b/drivers/mtd/spi/spi-nor-core.c @@ -330,12 +330,36 @@ static int spansion_read_any_reg(struct spi_nor *nor, u32 addr, u8 dummy, u8 *val) { struct spi_mem_op op = - SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 1), - SPI_MEM_OP_ADDR(nor->addr_mode_nbytes, addr, 1), - SPI_MEM_OP_DUMMY(dummy / 8, 1), - SPI_MEM_OP_DATA_IN(1, NULL, 1)); + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 0), + SPI_MEM_OP_ADDR(nor->addr_mode_nbytes, addr, 0), + SPI_MEM_OP_DUMMY(dummy, 0), + SPI_MEM_OP_DATA_IN(1, NULL, 0)); + u8 buf[2]; + int ret; + + spi_nor_setup_op(nor, &op, nor->reg_proto); + + /* + * In Octal DTR mode, the number of address bytes is always 4 regardless + * of addressing mode setting. + */ + if (nor->reg_proto == SNOR_PROTO_8_8_8_DTR) + op.addr.nbytes = 4; + + /* + * We don't want to read only one byte in DTR mode. So, read 2 and then + * discard the second byte. + */ + if (spi_nor_protocol_is_dtr(nor->reg_proto)) + op.data.nbytes = 2;
- return spi_nor_read_write_reg(nor, &op, val); + ret = spi_nor_read_write_reg(nor, &op, buf); + if (ret) + return ret; + + *val = buf[0]; + + return 0; }
static int spansion_write_any_reg(struct spi_nor *nor, u32 addr, u8 val)