This abstracts away the CCU register layout, which is necessary for supporting new SoCs like H6 with a reorganized CCU. One of the resets is referenced from the PHY node instead of the controller node, so it will have to wait until the PHY code is factored out to a separate driver.
Signed-off-by: Samuel Holland samuel@sholland.org ---
drivers/video/sunxi/sunxi_dw_hdmi.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-)
diff --git a/drivers/video/sunxi/sunxi_dw_hdmi.c b/drivers/video/sunxi/sunxi_dw_hdmi.c index 4f5d0989286..04588b570fd 100644 --- a/drivers/video/sunxi/sunxi_dw_hdmi.c +++ b/drivers/video/sunxi/sunxi_dw_hdmi.c @@ -5,12 +5,14 @@ * (C) Copyright 2017 Jernej Skrabec jernej.skrabec@siol.net */
+#include <clk.h> #include <common.h> #include <display.h> #include <dm.h> #include <dw_hdmi.h> #include <edid.h> #include <log.h> +#include <reset.h> #include <time.h> #include <asm/io.h> #include <asm/arch/clock.h> @@ -327,6 +329,8 @@ static int sunxi_dw_hdmi_probe(struct udevice *dev) struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev); struct sunxi_ccm_reg * const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct reset_ctl_bulk resets; + struct clk_bulk clocks; int ret;
/* Set pll3 to 297 MHz */ @@ -336,14 +340,24 @@ static int sunxi_dw_hdmi_probe(struct udevice *dev) clrsetbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_PLL_MASK, CCM_HDMI_CTRL_PLL3);
- /* Set ahb gating to pass */ - setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI); + /* This reset is referenced from the PHY devicetree node. */ setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI2); - setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI); - setbits_le32(&ccm->hdmi_slow_clk_cfg, CCM_HDMI_SLOW_CTRL_DDC_GATE);
- /* Clock on */ - setbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE); + ret = reset_get_bulk(dev, &resets); + if (ret) + return ret; + + ret = clk_get_bulk(dev, &clocks); + if (ret) + return ret; + + ret = reset_deassert_bulk(&resets); + if (ret) + return ret; + + ret = clk_enable_bulk(&clocks); + if (ret) + return ret;
sunxi_dw_hdmi_phy_init(&priv->hdmi);