Add support for packaging the TIFS Stub as it's required for basic Low Power Modes like Deep Sleep. The reason it is packaged using binman and not inherently as part of the DM firmware is because for HS devices, customer owns the customer key and only customer has access to it. DM is release by TI, Since TI doesn't have access to the customer key it cannot have a component that is signed by customer key. Hence, it's left as part of binman to be signed and packaged.
While at it, also make sure it's documented in phycore-am62x
Reviewed-by: Nishanth Menon nm@ti.com Reviewed-by: Wadim Egorov w.egorov@phytec.de Signed-off-by: Dhruva Gole d-gole@ti.com --- arch/arm/dts/k3-am625-phycore-som-binman.dtsi | 101 +++++++++++++++++- doc/board/phytec/phycore-am62x.rst | 2 +- 2 files changed, 100 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/k3-am625-phycore-som-binman.dtsi b/arch/arm/dts/k3-am625-phycore-som-binman.dtsi index dbee4aa8d8a5..0961ca66f280 100644 --- a/arch/arm/dts/k3-am625-phycore-som-binman.dtsi +++ b/arch/arm/dts/k3-am625-phycore-som-binman.dtsi @@ -150,12 +150,107 @@ filename = "ti-dm/am62xx/ipc_echo_testb_mcu1_0_release_strip.xer5f"; }; }; + + tifsstub-hs { + filename = "tifsstub.bin_hs"; + ti-secure-rom { + content = <&tifsstub_hs_cert>; + core = "secure"; + load = <0x40000>; + sw-rev = <CONFIG_K3_X509_SWRV>; + keyfile = "custMpk.pem"; + countersign; + tifsstub; + }; + tifsstub_hs_cert: tifsstub-hs-cert.bin { + filename = "ti-sysfw/ti-fs-stub-firmware-am62x-hs-cert.bin"; + type = "blob-ext"; + optional; + }; + tifsstub_hs_enc: tifsstub-hs-enc.bin { + filename = "ti-sysfw/ti-fs-stub-firmware-am62x-hs-enc.bin"; + type = "blob-ext"; + optional; + }; + }; + + tifsstub-fs { + filename = "tifsstub.bin_fs"; + tifsstub_fs_cert: tifsstub-fs-cert.bin { + filename = "ti-sysfw/ti-fs-stub-firmware-am62x-hs-cert.bin"; + type = "blob-ext"; + optional; + }; + tifsstub_fs_enc: tifsstub-fs-enc.bin { + filename = "ti-sysfw/ti-fs-stub-firmware-am62x-hs-enc.bin"; + type = "blob-ext"; + optional; + }; + + }; + + tifsstub-gp { + filename = "tifsstub.bin_gp"; + ti-secure-rom { + content = <&tifsstub_gp>; + core = "secure"; + load = <0x60000>; + sw-rev = <CONFIG_K3_X509_SWRV>; + keyfile = "ti-degenerate-key.pem"; + tifsstub; + }; + tifsstub_gp: tifsstub-gp.bin { + filename = "ti-sysfw/ti-fs-stub-firmware-am62x-gp.bin"; + type = "blob-ext"; + optional; + }; + }; + + ti-spl { insert-template = <&ti_spl_template>;
fit {
images { + tifsstub-hs { + description = "TIFSSTUB"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "tifsstub-hs"; + load = <0x9dc00000>; + entry = <0x9dc00000>; + blob-ext { + filename = "tifsstub.bin_hs"; + }; + }; + + tifsstub-fs { + description = "TIFSSTUB"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "tifsstub-fs"; + load = <0x9dc00000>; + entry = <0x9dc00000>; + blob-ext { + filename = "tifsstub.bin_fs"; + }; + }; + + tifsstub-gp { + description = "TIFSSTUB"; + type = "firmware"; + arch = "arm32"; + compression = "none"; + os = "tifsstub-gp"; + load = <0x9dc00000>; + entry = <0x9dc00000>; + blob-ext { + filename = "tifsstub.bin_gp"; + }; + }; dm { ti-secure { content = <&dm>; @@ -187,7 +282,8 @@ conf-0 { description = "k3-am625-phyboard-lyra-rdk"; firmware = "atf"; - loadables = "tee", "dm", "spl"; + loadables = "tee", "tifsstub-hs", "tifsstub-fs", + "tifsstub-gp", "dm", "spl"; fdt = "fdt-0"; }; }; @@ -266,7 +362,8 @@ conf-0 { description = "k3-am625-phyboard-lyra-rdk"; firmware = "atf"; - loadables = "tee", "dm", "spl"; + loadables = "tee", "tifsstub-hs", "tifsstub-fs", + "tifsstub-gp", "dm", "spl"; fdt = "fdt-0"; }; }; diff --git a/doc/board/phytec/phycore-am62x.rst b/doc/board/phytec/phycore-am62x.rst index af24acf9aac4..56c1fd8354b4 100644 --- a/doc/board/phytec/phycore-am62x.rst +++ b/doc/board/phytec/phycore-am62x.rst @@ -32,7 +32,7 @@ Sources
.. include:: ../ti/k3.rst :start-after: .. k3_rst_include_start_boot_firmwares - :end-before: .. k3_rst_include_end_boot_firmwares + :end-before: .. k3_rst_include_end_tifsstub
Build procedure ---------------