Hi Bryan,
2017-12-27 10:25 GMT-02:00 Bryan O'Donoghue bryan.odonoghue@linaro.org:
This patchset updates the i.MX HAB layer in u-boot to fix a list of identified issues and then to add and extend existing functionality.
The first block of patches 0001-0006 deal with fixing existing code,
- Fixes indentation
- Fixes the treatment of input parameters to hab_auth_image.
The second block of patches 0007-0013 are about tidying up the HAB code
- Remove reliance on hard-coding to specific offsets
- IVT header drives locating CSF
- Continue to support existing boards
Patches 0014 onwards extend out the HAB functionality.
- hab_rvt_check_target is a recommended check in the NXP documents to perform prior to hab_rvt_authenticate_image
- hab_rvt_failsafe is a useful function to set the board into BootROM USB recovery mode.
Bryan O'Donoghue (23): arm: imx: hab: Make authenticate_image return int arm: imx: hab: Fix authenticate_image result code arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail arm: imx: hab: Optimise flow of authenticate_image on hab_entry fail arm: imx: hab: Fix authenticate_image input parameters
After applying "[PATCH 05/23] arm: imx: hab: Fix authenticate_image input parameters" I'm getting the following error when building mx6sabreauto:
arch/arm/mach-imx/spl.c: In function 'jump_to_image_no_args': arch/arm/mach-imx/spl.c:200:14: error: 'IVT_SIZE' undeclared (first use in this function) offset + IVT_SIZE + CSF_PAD_SIZE, offset)) { ^ arch/arm/mach-imx/spl.c:200:14: note: each undeclared identifier is reported only once for each function it appears in arch/arm/mach-imx/spl.c:200:25: error: 'CSF_PAD_SIZE' undeclared (first use in this function) offset + IVT_SIZE + CSF_PAD_SIZE, offset)) { ^ arch/arm/mach-imx/spl.c:206:1: warning: 'noreturn' function does return } ^ scripts/Makefile.build:280: recipe for target 'spl/arch/arm/mach-imx/spl.o' failed make[2]: *** [spl/arch/arm/mach-imx/spl.o] Error 1 make[2]: *** Waiting for unfinished jobs....
arm: imx: hab: Fix authenticate image lockup on MX7 arm: imx: hab: Move IVT_SIZE to hab.h arm: imx: hab: Move CSF_PAD_SIZE to hab.h
I believe patches "[PATCH 07/23] arm: imx: hab: Move IVT_SIZE to hab.h" and "[PATCH 08/23] arm: imx: hab: Move CSF_PAD_SIZE to hab.h" have to be applied before the [PATCH 05/23] to avoid this build error. Can you please check if it's possible to move these patches?
Thanks, Breno Lima