VBUS detection could be needed not only by the musb code (to prevent host mode), but also by e.g. gadget drivers to start only when a cable is connected.
In addition, this allows more flexibility in vbus detection, as it could easily be extended to other USBC indexes. Eventually, this would help making musb support independent from a hardcoded USB controller index (0).
Signed-off-by: Paul Kocialkowski contact@paulk.fr --- arch/arm/cpu/armv7/sunxi/usbc.c | 66 +++++++++++++++++++++++++++++++--- arch/arm/include/asm/arch-sunxi/usbc.h | 1 + board/sunxi/Kconfig | 1 - drivers/usb/musb-new/sunxi.c | 45 ++++------------------- 4 files changed, 69 insertions(+), 44 deletions(-)
diff --git a/arch/arm/cpu/armv7/sunxi/usbc.c b/arch/arm/cpu/armv7/sunxi/usbc.c index 14de9f9..5c85e4a 100644 --- a/arch/arm/cpu/armv7/sunxi/usbc.c +++ b/arch/arm/cpu/armv7/sunxi/usbc.c @@ -41,6 +41,7 @@ static struct sunxi_usbc_hcd { int usb_rst_mask; int ahb_clk_mask; int gpio_vbus; + int gpio_vbus_det; int irq; int id; } sunxi_usbc_hcd[] = { @@ -86,6 +87,12 @@ static bool use_axp_drivebus(int index) strcmp(CONFIG_USB0_VBUS_PIN, "axp_drivebus") == 0; }
+static bool use_axp_vbus_detect(int index) +{ + return index == 0 && + strcmp(CONFIG_USB0_VBUS_DET, "axp_vbus_detect") == 0; +} + void *sunxi_usbc_get_io_base(int index) { switch (index) { @@ -113,6 +120,17 @@ static int get_vbus_gpio(int index) return -1; }
+static int get_vbus_detect_gpio(int index) +{ + if (use_axp_vbus_detect(index)) + return -1; + + switch (index) { + case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_DET); + } + return -1; +} + static void usb_phy_write(struct sunxi_usbc_hcd *sunxi_usbc, int addr, int data, int len) { @@ -185,22 +203,31 @@ static void sunxi_usb_passby(struct sunxi_usbc_hcd *sunxi_usbc, int enable) int sunxi_usbc_request_resources(int index) { struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index]; + int ret = 0;
sunxi_usbc->gpio_vbus = get_vbus_gpio(index); if (sunxi_usbc->gpio_vbus != -1) - return gpio_request(sunxi_usbc->gpio_vbus, "usbc_vbus"); + ret |= gpio_request(sunxi_usbc->gpio_vbus, "usbc_vbus"); + + sunxi_usbc->gpio_vbus_det = get_vbus_detect_gpio(index); + if (sunxi_usbc->gpio_vbus_det != -1) + ret |= gpio_request(sunxi_usbc->gpio_vbus_det, "usbc_vbus_det");
- return 0; + return ret; }
int sunxi_usbc_free_resources(int index) { struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index]; + int ret = 0;
if (sunxi_usbc->gpio_vbus != -1) - return gpio_free(sunxi_usbc->gpio_vbus); + ret |= gpio_free(sunxi_usbc->gpio_vbus); + + if (sunxi_usbc->gpio_vbus_det != -1) + ret |= gpio_free(sunxi_usbc->gpio_vbus_det);
- return 0; + return ret; }
void sunxi_usbc_enable(int index) @@ -270,3 +297,34 @@ void sunxi_usbc_vbus_disable(int index) if (sunxi_usbc->gpio_vbus != -1) gpio_direction_output(sunxi_usbc->gpio_vbus, 0); } + +int sunxi_usbc_vbus_detect(int index) +{ + struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index]; + int err; + +#ifdef AXP_VBUS_DETECT + if (use_axp_vbus_detect(index)) { + err = axp_get_vbus(); + if (err < 0) + return err; + } else { +#endif + if (sunxi_usbc->gpio_vbus_det == -1) { + eprintf("Error: invalid vbus detection pin\n"); + return -1; + } + + err = gpio_direction_input(sunxi_usbc->gpio_vbus_det); + if (err) + return err; + + err = gpio_get_value(sunxi_usbc->gpio_vbus_det); + if (err < 0) + return err; +#ifdef AXP_VBUS_DETECT + } +#endif + + return err; +} diff --git a/arch/arm/include/asm/arch-sunxi/usbc.h b/arch/arm/include/asm/arch-sunxi/usbc.h index cb538cd..67281ec 100644 --- a/arch/arm/include/asm/arch-sunxi/usbc.h +++ b/arch/arm/include/asm/arch-sunxi/usbc.h @@ -20,3 +20,4 @@ void sunxi_usbc_enable(int index); void sunxi_usbc_disable(int index); void sunxi_usbc_vbus_enable(int index); void sunxi_usbc_vbus_disable(int index); +int sunxi_usbc_vbus_detect(int index); diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 0b6a492..c8dbfbe 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -225,7 +225,6 @@ config USB0_VBUS_PIN
config USB0_VBUS_DET string "Vbus detect pin for usb0 (otg)" - depends on USB_MUSB_SUNXI default "" ---help--- Set the Vbus detect pin for usb0 (otg). This takes a string in the diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c index 90aaec6..c9a6a16 100644 --- a/drivers/usb/musb-new/sunxi.c +++ b/drivers/usb/musb-new/sunxi.c @@ -235,52 +235,19 @@ static int sunxi_musb_init(struct musb *musb)
pr_debug("%s():\n", __func__);
- if (is_host_enabled(musb)) { - int vbus_det = sunxi_name_to_gpio(CONFIG_USB0_VBUS_DET); - -#ifdef AXP_VBUS_DETECT - if (!strcmp(CONFIG_USB0_VBUS_DET, "axp_vbus_detect")) { - err = axp_get_vbus(); - if (err < 0) - return err; - } else { -#endif - if (vbus_det == -1) { - eprintf("Error invalid Vusb-det pin\n"); - return -EINVAL; - } - - err = gpio_request(vbus_det, "vbus0_det"); - if (err) - return err; - - err = gpio_direction_input(vbus_det); - if (err) { - gpio_free(vbus_det); - return err; - } - - err = gpio_get_value(vbus_det); - if (err < 0) { - gpio_free(vbus_det); - return -EIO; - } - - gpio_free(vbus_det); -#ifdef AXP_VBUS_DETECT - } -#endif + err = sunxi_usbc_request_resources(0); + if (err) + return err;
+ if (is_host_enabled(musb)) { + err = sunxi_usbc_vbus_detect(0); if (err) { eprintf("Error: A charger is plugged into the OTG\n"); + sunxi_usbc_free_resources(0); return -EIO; } }
- err = sunxi_usbc_request_resources(0); - if (err) - return err; - musb->isr = sunxi_musb_interrupt; sunxi_usbc_enable(0);