EHCI interface now supports more than one controller. Wire up our usb functions to use this new interface.
Signed-off-by: Lucas Stach dev@lynxeye.de --- arch/arm/cpu/armv7/tegra20/usb.c | 15 ++++----------- arch/arm/include/asm/arch-tegra20/usb.h | 4 ++-- drivers/usb/host/ehci-tegra.c | 5 ++--- 3 Dateien geändert, 8 Zeilen hinzugefügt(+), 16 Zeilen entfernt(-)
diff --git a/arch/arm/cpu/armv7/tegra20/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c index 4a3ec7c..219f9c2 100644 --- a/arch/arm/cpu/armv7/tegra20/usb.c +++ b/arch/arm/cpu/armv7/tegra20/usb.c @@ -87,7 +87,6 @@ struct fdt_usb {
static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */ static unsigned port_count; /* Number of available ports */ -static int port_current; /* Current port (-1 = none) */
/* * This table has USB timing parameters for each Oscillator frequency we @@ -453,30 +452,25 @@ static int add_port(struct fdt_usb *config, const u32 timing[]) return 0; }
-int tegrausb_start_port(unsigned portnum, u32 *hccr, u32 *hcor) +int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor) { struct usb_ctlr *usbctlr;
if (portnum >= port_count) return -1; - tegrausb_stop_port(); set_host_mode(&port[portnum]);
usbctlr = port[portnum].reg; *hccr = (u32)&usbctlr->cap_length; *hcor = (u32)&usbctlr->usb_cmd; - port_current = portnum; return 0; }
-int tegrausb_stop_port(void) +int tegrausb_stop_port(int portnum) { struct usb_ctlr *usbctlr;
- if (port_current == -1) - return -1; - - usbctlr = port[port_current].reg; + usbctlr = port[portnum].reg;
/* Stop controller */ writel(0, &usbctlr->usb_cmd); @@ -485,7 +479,7 @@ int tegrausb_stop_port(void) /* Initiate controller reset */ writel(2, &usbctlr->usb_cmd); udelay(1000); - port_current = -1; + return 0; }
@@ -565,7 +559,6 @@ int board_usb_init(const void *blob) return -1; set_host_mode(&config); } - port_current = -1;
return 0; } diff --git a/arch/arm/include/asm/arch-tegra20/usb.h b/arch/arm/include/asm/arch-tegra20/usb.h index bd89d66..fdbd127 100644 --- a/arch/arm/include/asm/arch-tegra20/usb.h +++ b/arch/arm/include/asm/arch-tegra20/usb.h @@ -259,13 +259,13 @@ int board_usb_init(const void *blob); * @param hcor returns start address of EHCI HCOR registers * @return 0 if ok, -1 on error (generally invalid port number) */ -int tegrausb_start_port(unsigned portnum, u32 *hccr, u32 *hcor); +int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor);
/** * Stop the current port * * @return 0 if ok, -1 if no port was active */ -int tegrausb_stop_port(void); +int tegrausb_stop_port(int portnum);
#endif /* _TEGRA_USB_H_ */ diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index bb5a68e..a1c43f8 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -57,7 +57,7 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) * Select the first port, as we don't have a way of selecting others * yet */ - if (tegrausb_start_port(0, &our_hccr, &our_hcor)) + if (tegrausb_start_port(index, &our_hccr, &our_hcor)) return -1;
*hccr = (struct ehci_hccr *)our_hccr; @@ -72,6 +72,5 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) */ int ehci_hcd_stop(int index) { - tegrausb_stop_port(); - return 0; + return tegrausb_stop_port(index); }