Re: [U-Boot] loadb problem. Hangs on START_CHAR

Wolfgang,

Yes, those settings are all in my .kermrc setup.

I measured the fastest pulse on my scope to 8.691 µs, which gives 1/(8.691 x 1e-6) = 115061.56 baud. Not really 115200 but is it too far from working in your opinion? The tolerance in RS232 signalling is about 50% of the minimum pulse width for a byte which would be about 113000 - 117000 baud.

/Bo

-- View this message in context: http://u-boot.10912.n7.nabble.com/loadb-problem-Hangs-on-START-CHAR-tp195144... Sent from the U-Boot mailing list archive at Nabble.com.