Hi York,
On 20 November 2014 19:46, York Sun yorksun@freescale.com wrote:
On 11/20/2014 11:22 AM, York Sun wrote:
On 11/20/2014 11:13 AM, Simon Glass wrote:
You can only see the make output if you comment out this line in builderthread.py:
#args.append('-s')Then it will be in a file called 'log'. It would be nice to have an option for that...
Let me try that.
I made the change to file tools/buildman/builderthread.py
args.append('-s')+# args.append('-s')
I run it again for one commit and with one board
$ ./tools/buildman/buildman -b working_upstream_qoriq --count=1 --keep-outputs --force-build --force-reconfig MPC832XEMDS_HOST_66 -ve No section: 'make-flags' boards.cfg is up to date. Nothing to do. Building 1 commit for 1 boards (1 thread, 24 jobs per thread) Cloning repo for thread 0 01: arm: ls102xa: Select ge2_clk125 for eTSEC clock muxing powerpc: + MPC832XEMDS_HOST_66 +make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', needed by `u-boot.lds'. Stop. +make: *** [sub-make] Error 2 0 0 1 /1 MPC832XEMDS_HOST_66
$ ll ../working_upstream_qoriq/01_of_01_g3b33b926_arm--ls102xa--Select/MPC832XEMDS_HOST_66/ total 28 -rw-rw-r-- 1 jenkins jenkins 11588 Nov 20 13:28 autoconf.mk -rw-rw-r-- 1 jenkins jenkins 1 Nov 20 13:28 done -rw-rw-r-- 1 jenkins jenkins 168 Nov 20 13:28 err -rw-rw-r-- 1 jenkins jenkins 939 Nov 20 13:28 log -rw-rw-r-- 1 jenkins jenkins 276 Nov 20 13:28 toolchain
I don't see much useful information in file log
$ cat ../working_upstream_qoriq/01_of_01_g3b33b926_arm--ls102xa--Select/MPC832XEMDS_HOST_66/log
make[1]: Entering directory `/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build' GEN ./Makefile scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config.h UPD include/config.h GEN include/autoconf.mk GEN include/autoconf.mk.dep make[1]: Leaving directory `/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build' make[1]: Entering directory `/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build' CHK include/config/uboot.release CHK include/generated/timestamp_autogenerated.h GEN ./Makefile UPD include/generated/timestamp_autogenerated.h UPD include/config/uboot.release make[1]: Leaving directory `/local/jenkins/jobs/york-scm-test-upstream-before-requesting-pull/working_upstream_qoriq/.bm-work/00/build'
Nothing more than that. Where shall I look for ARCH?
That doesn't look like a full build to me. The 'err' file may have more clues. You could try without '--force-build --force-reconfig' perhaps.
If I build for board T4240QDS, it has error on most but not all. T4240QDS T4240QDS_SRIO_PCIE_BOOT T4240QDS_SECURE_BOOT failed, but T4240QDS_NAND didn't.
It's a bit of a mystery. How about adding V=1 in your make flags in ~/.buildman:
[make-flags] T4240QDS=V=1
Regards, Simon