Enable SDR104 modes on M3W and H3 boards. With the SDHI fixes in place, it is now possible to use SDR104.
Signed-off-by: Marek Vasut marek.vasut+renesas@gmail.com Cc: Nobuhiro Iwamatsu iwamatsu@nigauri.org --- arch/arm/dts/salvator-common.dtsi | 10 ++++++++++ arch/arm/dts/ulcb.dtsi | 5 +++++ 2 files changed, 15 insertions(+)
diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi index 826a02c333..d2d667bb01 100644 --- a/arch/arm/dts/salvator-common.dtsi +++ b/arch/arm/dts/salvator-common.dtsi @@ -623,8 +623,13 @@ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; bus-width = <4>; + sd-uhs-sdr12; + sd-uhs-sdr25; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; + + max-frequency = <208000000>; };
&sdhi2 { @@ -640,6 +645,7 @@ non-removable; fixed-emmc-driver-type = <1>; status = "okay"; + max-frequency = <200000000>; };
&sdhi3 { @@ -652,8 +658,12 @@ cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; bus-width = <4>; + sd-uhs-sdr12; + sd-uhs-sdr25; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; + max-frequency = <208000000>; };
&ssi1 { diff --git a/arch/arm/dts/ulcb.dtsi b/arch/arm/dts/ulcb.dtsi index b61e2656d5..44dd84179f 100644 --- a/arch/arm/dts/ulcb.dtsi +++ b/arch/arm/dts/ulcb.dtsi @@ -401,8 +401,12 @@ vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; bus-width = <4>; + sd-uhs-sdr12; + sd-uhs-sdr25; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; + max-frequency = <208000000>; };
&sdhi2 { @@ -417,6 +421,7 @@ mmc-hs200-1_8v; non-removable; status = "okay"; + max-frequency = <200000000>; };
&ssi1 {