This patch series updates/fixes below things: - Handle errors from tapdelay functions and return to set_delay() - Add ZynqMP firmware related enums which are used in sdhci driver - Replace mmio_write() with firmware call xilinx_pm_request() - Move tapdelay setting code from tap_delays.c to driver and remove tap_dealy.c and zynqmp_tap_delay.h - Change variable name from deviceid to node_id in couple of functions for consistancy - Add a workaround for sd card detect stable issue for Versal platforms - Use set_control_reg from sdhci.c
Changes in v2: - Split patch 1/7 to two patches, one for zynq_sdhci and other one for sdhci - This is the second patch that has been split from 1/7 - This covers changes for sdhci driver separately - Added a debug print in case of error from set_delay() - Added comment for why 1ms delay is needed between DLL assert and release - Remove mmc->dev->seq_ and use priv->deviceid instead - Changed return error from -EIO to -ETIMEDOUT in arasan_sdhci_probe() in card detect state stable workaround
Ashok Reddy Soma (6): mmc: zynq_sdhci: Return errors from arasan_sdhci_set_tapdelay mmc: sdhci: Change prototype of set_delay to return errors mmc: zynq_sdhci: Use xilinx pm request instead of mmio_write mmc: zynq_sdhci: Move setting tapdelay code to driver mmc: zynq_sdhci: Change variable deviceid to node_id mmc: zynq_sdhci: Use set_control_reg from sdhci.c
T Karthik Reddy (2): zynqmp_firmware: Add zynqmp firmware related enums mmc: zynq_sdhci: Wait till sd card detect state is stable
board/xilinx/zynqmp/Makefile | 2 - board/xilinx/zynqmp/tap_delays.c | 101 -------------------- drivers/mmc/sdhci.c | 10 +- drivers/mmc/zynq_sdhci.c | 155 +++++++++++++++++++++++-------- include/sdhci.h | 2 +- include/zynqmp_firmware.h | 127 +++++++++++++++++++++++++ include/zynqmp_tap_delay.h | 21 ----- 7 files changed, 251 insertions(+), 167 deletions(-) delete mode 100644 board/xilinx/zynqmp/tap_delays.c delete mode 100644 include/zynqmp_tap_delay.h