Hi Michal,
On Mon, 19 Aug 2013 09:36:33 +0200, Michal Simek monstr@monstr.eu wrote:
Hi Albert,
please pull these 3 zynq patches to your arm tree. I have rebased the tree on the 2013.07 to remove that new nds32 patches.
There is still pending the arm: lds: Remove libgcc eabi exception handling tables patch. Have you considered to also add it?
v3:
- Rebase on the v2013.07 because Albert didn't want to nds32 stuff
v2:
- Changed email address,
- There was incorrect rebase which I have fixed - correct sha1 now
Thanks. Michal
The following changes since commit 62c175fbb8a0f9a926c88294ea9f7e88eb898f6c:
Prepare v2013.07 (2013-07-23 07:58:13 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-microblaze.git zynq
for you to fetch changes up to 037e0d25c6ee6367beca3062759993d10759dff2:
zynq: Enable axi ethernet and emaclite driver initialization (2013-08-19 09:32:00 +0200)
Michal Simek (3): zynq: Add new ddrc driver for ECC support zynq: slcr: Wait 100ms till clk is properly setup zynq: Enable axi ethernet and emaclite driver initialization
arch/arm/cpu/armv7/zynq/Makefile | 1 + arch/arm/cpu/armv7/zynq/ddrc.c | 50 ++++++++++++++++++++++++++++++ arch/arm/cpu/armv7/zynq/slcr.c | 2 +- arch/arm/include/asm/arch-zynq/hardware.h | 8 +++++ arch/arm/include/asm/arch-zynq/sys_proto.h | 1 + board/xilinx/zynq/board.c | 19 ++++++++++++ 6 files changed, 80 insertions(+), 1 deletion(-) create mode 100644 arch/arm/cpu/armv7/zynq/ddrc.c
Applied to u-boot-arm/master, thanks!
Amicalement,