All boards have been converted to use mdio node that's why move ethernet phys under mdio node too.
Signed-off-by: Michal Simek michal.simek@amd.com ---
Same change was done by: https://lore.kernel.org/r/ff165281a70a38e2b76fee91e6255ce95ce8021b.169537883... --- arch/arm/dts/zynqmp-vp-x-a2785-00-revA.dts | 10 +++++++--- arch/arm/dts/zynqmp-vpk120-revA.dts | 10 +++++++--- 2 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/arch/arm/dts/zynqmp-vp-x-a2785-00-revA.dts b/arch/arm/dts/zynqmp-vp-x-a2785-00-revA.dts index 2f88aa4a0d28..9ab8f5bfffe4 100644 --- a/arch/arm/dts/zynqmp-vp-x-a2785-00-revA.dts +++ b/arch/arm/dts/zynqmp-vp-x-a2785-00-revA.dts @@ -119,9 +119,13 @@ phy-mode = "sgmii"; /* DTG generates this properly 1512 */ is-internal-pcspma; /* phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>; */ - /* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */ - phy0: ethernet-phy@0 { /* u131 - M88e1512 */ - reg = <0>; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + /* reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */ + phy0: ethernet-phy@0 { /* u131 - M88e1512 */ + reg = <0>; + }; }; };
diff --git a/arch/arm/dts/zynqmp-vpk120-revA.dts b/arch/arm/dts/zynqmp-vpk120-revA.dts index 66919f578e02..ce76e0b3db36 100644 --- a/arch/arm/dts/zynqmp-vpk120-revA.dts +++ b/arch/arm/dts/zynqmp-vpk120-revA.dts @@ -120,9 +120,13 @@ phy-mode = "sgmii"; /* DTG generates this properly 1512 */ is-internal-pcspma; /* phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>; */ - /* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */ - phy0: ethernet-phy@0 { - reg = <0>; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + /* reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */ + phy0: ethernet-phy@0 { + reg = <0>; + }; }; };