[U-Boot-Users] MII PHY

Evening (o;

Someone has a clue why using "miiphy_reset" and "miiphy_write" would not work on a MPC852T board with DP83846A PHY?

Always gives "mii_send STUCK!" when I call through common/board.c via "phy_reset" with PDDIR and PDPAR set correctly to 0x1fff.

Problem is that the DP83846 PHY comes up with "auto-negotiation" set to on and "isolate" also set to on....so after resetting the "isolate" bit it works just fine.

Any other nice place to place a PHY reset code?

best regards rick