As the kernel DT does not have an Ethernet driver and bindings, lets add the DT bindings for U-Boot's sun8i EMAC Ethernet driver as a U-Boot specific DT include. This re-adds the nodes that got lost when syncing the kernel DT to U-Boot. Compared to the former bits it slightly updates the DT nodes to adapt to the new DT (clock and reset nodes), but keeps the rest the same to let it work with the existing U-Boot driver.
Signed-off-by: Andre Przywara andre.przywara@arm.com --- arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi | 50 +++++++++++++++++++++++++ 1 file changed, 50 insertions(+) create mode 100644 arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi
diff --git a/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi b/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi new file mode 100644 index 0000000..9c61bea --- /dev/null +++ b/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi @@ -0,0 +1,50 @@ +/ { + aliases { + ethernet0 = &emac; + }; + + soc { + emac: ethernet@01c30000 { + compatible = "allwinner,sun50i-a64-emac"; + reg = <0x01c30000 0x2000>, <0x01c00030 0x4>; + reg-names = "emac", "syscon"; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "ahb"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "ahb"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy = <&phy1>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; +}; + +&pio { + rmii_pins: rmii_pins { + allwinner,pins = "PD10", "PD11", "PD13", "PD14", + "PD17", "PD18", "PD19", "PD20", + "PD22", "PD23"; + allwinner,function = "emac"; + allwinner,drive = <3>; + allwinner,pull = <0>; + }; + + rgmii_pins: rgmii_pins { + allwinner,pins = "PD8", "PD9", "PD10", "PD11", + "PD12", "PD13", "PD15", + "PD16", "PD17", "PD18", "PD19", + "PD20", "PD21", "PD22", "PD23"; + allwinner,function = "emac"; + allwinner,drive = <3>; + allwinner,pull = <0>; + }; +};