Drivers are not allowed to use static data since they may be used in SPL where BSS is not available.
It is possible that driver model may provide support for numbering devices in the future. But for now, move this to global_data.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v6: None Changes in v5: None Changes in v4: - Add new patch to drop static data in designware i2c driver
Changes in v3: None Changes in v2: None
arch/x86/include/asm/global_data.h | 1 + drivers/i2c/designware_i2c_pci.c | 9 ++++++--- 2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/x86/include/asm/global_data.h b/arch/x86/include/asm/global_data.h index 7f3ada06f6..0e7b946205 100644 --- a/arch/x86/include/asm/global_data.h +++ b/arch/x86/include/asm/global_data.h @@ -96,6 +96,7 @@ struct arch_global_data { ulong table; /* Table pointer from previous loader */ int turbo_state; /* Current turbo state */ struct irq_routing_table *pirq_routing_table; + int dw_i2c_num_cards; /* Used by designware i2c driver */ #ifdef CONFIG_SEABIOS u32 high_table_ptr; u32 high_table_limit; diff --git a/drivers/i2c/designware_i2c_pci.c b/drivers/i2c/designware_i2c_pci.c index e8fc6f2a90..8d6bb37f5c 100644 --- a/drivers/i2c/designware_i2c_pci.c +++ b/drivers/i2c/designware_i2c_pci.c @@ -34,7 +34,6 @@ static int designware_i2c_pci_probe(struct udevice *dev)
static int designware_i2c_pci_bind(struct udevice *dev) { - static int num_cards; char name[20];
/* @@ -45,9 +44,13 @@ static int designware_i2c_pci_bind(struct udevice *dev) * using this driver is impossible for PCIe I2C devices. * This can be removed, once a better (correct) way for this * is found and implemented. + * + * TODO(sjg@chromium.org): Perhaps if uclasses had platdata this would + * be possible. We cannot use static data in drivers since they may be + * used in SPL or before relocation. */ - dev->req_seq = num_cards; - sprintf(name, "i2c_designware#%u", num_cards++); + dev->req_seq = gd->arch.dw_i2c_num_cards++; + sprintf(name, "i2c_designware#%u", dev->req_seq); device_set_name(dev, name);
return 0;