On CPM, the RISC core is a lot more efficiant when doing transfers in 16-bits chunks than in 8-bits chunks, but unfortunately the words need to be byte swapped.
So, for large tranfers with an even size, allocate a temporary buffer and byte-swap data before and after transfer.
This change allows setting higher speed for transfer. For instance on an MPC 8xx (CPM1 comms RISC processor), the documentation tells that transfer in byte mode at 1 kbit/s uses 0.200% of CPM load at 25 MHz while a word transfer at the same speed uses 0.032% of CPM load. This means the speed can be 6 times higher in word mode for the same CPM load.
For small transfers, the load reduction is not worth the CPU load required to allocate the temporary buffer, so do it only when data size is over 64 bytes.
Signed-off-by: Christophe Leroy christophe.leroy@csgroup.eu --- drivers/spi/mpc8xx_spi.c | 44 +++++++++++++++++++++++++++++++++++++--- 1 file changed, 41 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/mpc8xx_spi.c b/drivers/spi/mpc8xx_spi.c index a193ac711b..b1abfbf4fc 100644 --- a/drivers/spi/mpc8xx_spi.c +++ b/drivers/spi/mpc8xx_spi.c @@ -18,6 +18,7 @@
#include <common.h> #include <dm.h> +#include <malloc.h> #include <mpc8xx.h> #include <spi.h> #include <linux/delay.h> @@ -30,6 +31,7 @@ #define CPM_SPI_BASE_TX (CPM_SPI_BASE + sizeof(cbd_t))
#define MAX_BUFFER 0x8000 /* Max possible is 0xffff. We want power of 2 */ +#define MIN_HWORD_XFER 64 /* Minimum size for 16 bits transfer */
struct mpc8xx_priv { spi_t __iomem *spi; @@ -149,23 +151,46 @@ static int mpc8xx_spi_xfer_one(struct udevice *dev, size_t count, immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR; cpm8xx_t __iomem *cp = &immr->im_cpm; cbd_t __iomem *tbdf, *rbdf; + void *bufout, *bufin; + u16 spmode_len; int tm;
tbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_TX]; rbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_RX];
+ if (!(count & 1) && count >= MIN_HWORD_XFER) { + spmode_len = SPMODE_LEN(16); + if (dout) { + int i; + + bufout = malloc(count); + for (i = 0; i < count; i += 2) + *(u16 *)(bufout + i) = swab16(*(u16 *)(dout + i)); + } else { + bufout = NULL; + } + if (din) + bufin = malloc(count); + else + bufin = NULL; + } else { + spmode_len = SPMODE_LEN(8); + bufout = (void *)dout; + bufin = din; + } + /* Setting tx bd status and data length */ - out_be32(&tbdf->cbd_bufaddr, dout ? (ulong)dout : (ulong)dummy_buffer); + out_be32(&tbdf->cbd_bufaddr, bufout ? (ulong)bufout : (ulong)dummy_buffer); out_be16(&tbdf->cbd_sc, BD_SC_READY | BD_SC_LAST | BD_SC_WRAP); out_be16(&tbdf->cbd_datlen, count);
/* Setting rx bd status and data length */ - out_be32(&rbdf->cbd_bufaddr, din ? (ulong)din : (ulong)dummy_buffer); + out_be32(&rbdf->cbd_bufaddr, bufin ? (ulong)bufin : (ulong)dummy_buffer); out_be16(&rbdf->cbd_sc, BD_SC_EMPTY | BD_SC_WRAP); out_be16(&rbdf->cbd_datlen, 0); /* rx length has no significance */
clrsetbits_be16(&cp->cp_spmode, ~SPMODE_LOOP, SPMODE_REV | SPMODE_MSTR | - SPMODE_EN | SPMODE_LEN(8) | SPMODE_PM(0x8)); + SPMODE_EN | spmode_len | SPMODE_PM(0x8)); out_8(&cp->cp_spim, 0); /* Mask all SPI events */ out_8(&cp->cp_spie, SPI_EMASK); /* Clear all SPI events */
@@ -188,6 +213,19 @@ static int mpc8xx_spi_xfer_one(struct udevice *dev, size_t count, if (tm >= 1000) return -ETIMEDOUT;
+ if (!(count & 1) && count > MIN_HWORD_XFER) { + if (dout) + free(bufout); + if (din) { + int i; + + bufout = malloc(count); + for (i = 0; i < count; i += 2) + *(u16 *)(din + i) = swab16(*(u16 *)(bufin + i)); + free(bufin); + } + } + return 0; }