Grant Likely wrote:
On 7/4/07, Jerry Van Baren gvb.uboot@gmail.com wrote:
Do *NOT* return after the "point of no return" has been passed. If something goes wrong, the board must be reset after that point. Move the "Transferring control to Linux" debug message back to where it belongs: just before transferring control to linux.
Why is it necessary to reset the board at this point? The failure paths here seem to be things like invalid checksums and the like. Why are these tests after a point of no return?
I would think that if any of these failures are hit, you would *not* want to reset the board so you can figure out what was going on.
Cheers, g.
We've smashed our underpinnings by uncompressing linux over our interrupt vectors before the checksum catches the problem. There is no way back other than a reset. The error I fixed (in a couple of places) was returns. FWIIW, my experience with the erroneous returns is that it sort of works, but not right and then funky stuff happens. :-/
I presume the comment was a general one. If you have any specific reset vs. return questions, hollar and I'll justify them or eat crow.
Thanks, gvb