[PATCH v2 09/12] phy: atheros: move delay config to common function

Signed-off-by: Michael Walle michael@walle.cc --- drivers/net/phy/atheros.c | 38 ++++++++++++++++++++++---------------- 1 file changed, 22 insertions(+), 16 deletions(-)

diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c index 660dcd9491..22035c2496 100644 --- a/drivers/net/phy/atheros.c +++ b/drivers/net/phy/atheros.c @@ -94,19 +94,32 @@ static int ar8021_config(struct phy_device *phydev) return 0; }

-static int ar8031_config(struct phy_device *phydev) +static int ar803x_delay_config(struct phy_device *phydev) { + int ret; + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID || phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) - ar803x_enable_tx_delay(phydev, true); + ret = ar803x_enable_tx_delay(phydev, true); else - ar803x_enable_tx_delay(phydev, false); + ret = ar803x_enable_tx_delay(phydev, false);

if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID || phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) - ar803x_enable_rx_delay(phydev, true); + ret = ar803x_enable_rx_delay(phydev, true); else - ar803x_enable_rx_delay(phydev, false); + ret = ar803x_enable_rx_delay(phydev, false); + + return ret; +} + +static int ar8031_config(struct phy_device *phydev) +{ + int ret; + + ret = ar803x_delay_config(phydev); + if (ret < 0) + return ret;

phydev->supported = phydev->drv->features;

@@ -118,6 +131,7 @@ static int ar8031_config(struct phy_device *phydev)

static int ar8035_config(struct phy_device *phydev) { + int ret; int regval;

/* Configure CLK_25M output clock at 125 MHz */ @@ -126,17 +140,9 @@ static int ar8035_config(struct phy_device *phydev) regval |= AR8035_CLK_25M_FREQ_125M; phy_write_mmd(phydev, MDIO_MMD_AN, AR803x_CLK_25M_SEL_REG, regval);

- if ((phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || - (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) - ar803x_enable_tx_delay(phydev, true); - else - ar803x_enable_tx_delay(phydev, false); - - if ((phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) || - (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)) - ar803x_enable_rx_delay(phydev, true); - else - ar803x_enable_rx_delay(phydev, false); + ret = ar803x_delay_config(phydev); + if (ret < 0) + return ret;

phydev->supported = phydev->drv->features;