From: Rob Herring rob.herring@calxeda.com
The s5p mmc controller is a standard SDHCI controller with a few extra registers. So rename it to reflect that and so other platforms can use it.
Signed-off-by: Rob Herring rob.herring@calxeda.com --- drivers/mmc/Makefile | 3 +- drivers/mmc/s5p_mmc.c | 478 ------------------------------------------------- drivers/mmc/sdhci.c | 478 +++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 480 insertions(+), 479 deletions(-) delete mode 100644 drivers/mmc/s5p_mmc.c create mode 100644 drivers/mmc/sdhci.c
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index a8fe17a..a9f6921 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -37,7 +37,8 @@ COBJS-$(CONFIG_MXC_MMC) += mxcmmc.o COBJS-$(CONFIG_OMAP3_MMC) += omap3_mmc.o COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o -COBJS-$(CONFIG_S5P_MMC) += s5p_mmc.o +COBJS-$(CONFIG_S5P_MMC) += sdhci.o +COBJS-$(CONFIG_SDHCI) += sdhci.o
COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/mmc/s5p_mmc.c b/drivers/mmc/s5p_mmc.c deleted file mode 100644 index 668c28b..0000000 --- a/drivers/mmc/s5p_mmc.c +++ /dev/null @@ -1,478 +0,0 @@ -/* - * (C) Copyright 2009 SAMSUNG Electronics - * Minkyu Kang mk7.kang@samsung.com - * Jaehoon Chung jh80.chung@samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <common.h> -#include <mmc.h> -#include <asm/io.h> -#include <asm/arch/mmc.h> - -/* support 4 mmc hosts */ -struct mmc mmc_dev[4]; -struct mmc_host mmc_host[4]; - -static inline struct s5p_mmc *s5p_get_base_mmc(int dev_index) -{ - unsigned long offset = dev_index * sizeof(struct s5p_mmc); - return (struct s5p_mmc *)(samsung_get_base_mmc() + offset); -} - -static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data) -{ - unsigned char ctrl; - - debug("data->dest: %08x\n", (u32)data->dest); - writel((u32)data->dest, &host->reg->sysad); - /* - * DMASEL[4:3] - * 00 = Selects SDMA - * 01 = Reserved - * 10 = Selects 32-bit Address ADMA2 - * 11 = Selects 64-bit Address ADMA2 - */ - ctrl = readb(&host->reg->hostctl); - ctrl &= ~(3 << 3); - writeb(ctrl, &host->reg->hostctl); - - /* We do not handle DMA boundaries, so set it to max (512 KiB) */ - writew((7 << 12) | (data->blocksize & 0xFFF), &host->reg->blksize); - writew(data->blocks, &host->reg->blkcnt); -} - -static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data) -{ - unsigned short mode; - - /* - * TRNMOD - * MUL1SIN0[5] : Multi/Single Block Select - * RD1WT0[4] : Data Transfer Direction Select - * 1 = read - * 0 = write - * ENACMD12[2] : Auto CMD12 Enable - * ENBLKCNT[1] : Block Count Enable - * ENDMA[0] : DMA Enable - */ - mode = (1 << 1) | (1 << 0); - if (data->blocks > 1) - mode |= (1 << 5); - if (data->flags & MMC_DATA_READ) - mode |= (1 << 4); - - writew(mode, &host->reg->trnmod); -} - -static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) -{ - struct mmc_host *host = (struct mmc_host *)mmc->priv; - int flags, i; - unsigned int timeout; - unsigned int mask; - unsigned int retry = 0x100000; - - /* Wait max 10 ms */ - timeout = 10; - - /* - * PRNSTS - * CMDINHDAT[1] : Command Inhibit (DAT) - * CMDINHCMD[0] : Command Inhibit (CMD) - */ - mask = (1 << 0); - if ((data != NULL) || (cmd->resp_type & MMC_RSP_BUSY)) - mask |= (1 << 1); - - /* - * We shouldn't wait for data inihibit for stop commands, even - * though they might use busy signaling - */ - if (data) - mask &= ~(1 << 1); - - while (readl(&host->reg->prnsts) & mask) { - if (timeout == 0) { - printf("%s: timeout error\n", __func__); - return -1; - } - timeout--; - udelay(1000); - } - - if (data) - mmc_prepare_data(host, data); - - debug("cmd->arg: %08x\n", cmd->cmdarg); - writel(cmd->cmdarg, &host->reg->argument); - - if (data) - mmc_set_transfer_mode(host, data); - - if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY)) - return -1; - - /* - * CMDREG - * CMDIDX[13:8] : Command index - * DATAPRNT[5] : Data Present Select - * ENCMDIDX[4] : Command Index Check Enable - * ENCMDCRC[3] : Command CRC Check Enable - * RSPTYP[1:0] - * 00 = No Response - * 01 = Length 136 - * 10 = Length 48 - * 11 = Length 48 Check busy after response - */ - if (!(cmd->resp_type & MMC_RSP_PRESENT)) - flags = 0; - else if (cmd->resp_type & MMC_RSP_136) - flags = (1 << 0); - else if (cmd->resp_type & MMC_RSP_BUSY) - flags = (3 << 0); - else - flags = (2 << 0); - - if (cmd->resp_type & MMC_RSP_CRC) - flags |= (1 << 3); - if (cmd->resp_type & MMC_RSP_OPCODE) - flags |= (1 << 4); - if (data) - flags |= (1 << 5); - - debug("cmd: %d\n", cmd->cmdidx); - - writew((cmd->cmdidx << 8) | flags, &host->reg->cmdreg); - - for (i = 0; i < retry; i++) { - mask = readl(&host->reg->norintsts); - /* Command Complete */ - if (mask & (1 << 0)) { - if (!data) - writel(mask, &host->reg->norintsts); - break; - } - } - - if (i == retry) { - printf("%s: waiting for status update\n", __func__); - return TIMEOUT; - } - - if (mask & (1 << 16)) { - /* Timeout Error */ - debug("timeout: %08x cmd %d\n", mask, cmd->cmdidx); - return TIMEOUT; - } else if (mask & (1 << 15)) { - /* Error Interrupt */ - debug("error: %08x cmd %d\n", mask, cmd->cmdidx); - return -1; - } - - if (cmd->resp_type & MMC_RSP_PRESENT) { - if (cmd->resp_type & MMC_RSP_136) { - /* CRC is stripped so we need to do some shifting. */ - for (i = 0; i < 4; i++) { - unsigned int offset = - (unsigned int)(&host->reg->rspreg3 - i); - cmd->response[i] = readl(offset) << 8; - - if (i != 3) { - cmd->response[i] |= - readb(offset - 1); - } - debug("cmd->resp[%d]: %08x\n", - i, cmd->response[i]); - } - } else if (cmd->resp_type & MMC_RSP_BUSY) { - for (i = 0; i < retry; i++) { - /* PRNTDATA[23:20] : DAT[3:0] Line Signal */ - if (readl(&host->reg->prnsts) - & (1 << 20)) /* DAT[0] */ - break; - } - - if (i == retry) { - printf("%s: card is still busy\n", __func__); - return TIMEOUT; - } - - cmd->response[0] = readl(&host->reg->rspreg0); - debug("cmd->resp[0]: %08x\n", cmd->response[0]); - } else { - cmd->response[0] = readl(&host->reg->rspreg0); - debug("cmd->resp[0]: %08x\n", cmd->response[0]); - } - } - - if (data) { - while (1) { - mask = readl(&host->reg->norintsts); - - if (mask & (1 << 15)) { - /* Error Interrupt */ - writel(mask, &host->reg->norintsts); - printf("%s: error during transfer: 0x%08x\n", - __func__, mask); - return -1; - } else if (mask & (1 << 3)) { - /* DMA Interrupt */ - debug("DMA end\n"); - break; - } else if (mask & (1 << 1)) { - /* Transfer Complete */ - debug("r/w is done\n"); - break; - } - } - writel(mask, &host->reg->norintsts); - } - - udelay(1000); - return 0; -} - -static void mmc_change_clock(struct mmc_host *host, uint clock) -{ - int div; - unsigned short clk; - unsigned long timeout; - unsigned long ctrl2; - - /* - * SELBASECLK[5:4] - * 00/01 = HCLK - * 10 = EPLL - * 11 = XTI or XEXTCLK - */ - ctrl2 = readl(&host->reg->control2); - ctrl2 &= ~(3 << 4); - ctrl2 |= (2 << 4); - writel(ctrl2, &host->reg->control2); - - writew(0, &host->reg->clkcon); - - /* XXX: we assume that clock is between 40MHz and 50MHz */ - if (clock == 0) - goto out; - else if (clock <= 400000) - div = 0x100; - else if (clock <= 20000000) - div = 4; - else if (clock <= 26000000) - div = 2; - else - div = 1; - debug("div: %d\n", div); - - div >>= 1; - /* - * CLKCON - * SELFREQ[15:8] : base clock divied by value - * ENSDCLK[2] : SD Clock Enable - * STBLINTCLK[1] : Internal Clock Stable - * ENINTCLK[0] : Internal Clock Enable - */ - clk = (div << 8) | (1 << 0); - writew(clk, &host->reg->clkcon); - - /* Wait max 10 ms */ - timeout = 10; - while (!(readw(&host->reg->clkcon) & (1 << 1))) { - if (timeout == 0) { - printf("%s: timeout error\n", __func__); - return; - } - timeout--; - udelay(1000); - } - - clk |= (1 << 2); - writew(clk, &host->reg->clkcon); - -out: - host->clock = clock; -} - -static void mmc_set_ios(struct mmc *mmc) -{ - struct mmc_host *host = mmc->priv; - unsigned char ctrl; - unsigned long val; - - debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock); - - /* - * SELCLKPADDS[17:16] - * 00 = 2mA - * 01 = 4mA - * 10 = 7mA - * 11 = 9mA - */ - writel(0x3 << 16, &host->reg->control4); - - val = readl(&host->reg->control2); - val &= (0x3 << 4); - - val |= (1 << 31) | /* write status clear async mode enable */ - (1 << 30) | /* command conflict mask enable */ - (1 << 14) | /* Feedback Clock Enable for Rx Clock */ - (1 << 8); /* SDCLK hold enable */ - - writel(val, &host->reg->control2); - - /* - * FCSEL1[15] FCSEL0[7] - * FCSel[1:0] : Rx Feedback Clock Delay Control - * Inverter delay means10ns delay if SDCLK 50MHz setting - * 01 = Delay1 (basic delay) - * 11 = Delay2 (basic delay + 2ns) - * 00 = Delay3 (inverter delay) - * 10 = Delay4 (inverter delay + 2ns) - */ - writel(0x8080, &host->reg->control3); - - mmc_change_clock(host, mmc->clock); - - ctrl = readb(&host->reg->hostctl); - - /* - * WIDE8[5] - * 0 = Depend on WIDE4 - * 1 = 8-bit mode - * WIDE4[1] - * 1 = 4-bit mode - * 0 = 1-bit mode - */ - if (mmc->bus_width == 8) - ctrl |= (1 << 5); - else if (mmc->bus_width == 4) - ctrl |= (1 << 1); - else - ctrl &= ~(1 << 1); - - /* - * OUTEDGEINV[2] - * 1 = Riging edge output - * 0 = Falling edge output - */ - ctrl &= ~(1 << 2); - - writeb(ctrl, &host->reg->hostctl); -} - -static void mmc_reset(struct mmc_host *host) -{ - unsigned int timeout; - - /* - * RSTALL[0] : Software reset for all - * 1 = reset - * 0 = work - */ - writeb((1 << 0), &host->reg->swrst); - - host->clock = 0; - - /* Wait max 100 ms */ - timeout = 100; - - /* hw clears the bit when it's done */ - while (readb(&host->reg->swrst) & (1 << 0)) { - if (timeout == 0) { - printf("%s: timeout error\n", __func__); - return; - } - timeout--; - udelay(1000); - } -} - -static int mmc_core_init(struct mmc *mmc) -{ - struct mmc_host *host = (struct mmc_host *)mmc->priv; - unsigned int mask; - - mmc_reset(host); - - host->version = readw(&host->reg->hcver); - - /* mask all */ - writel(0xffffffff, &host->reg->norintstsen); - writel(0xffffffff, &host->reg->norintsigen); - - writeb(0xe, &host->reg->timeoutcon); /* TMCLK * 2^27 */ - - /* - * NORMAL Interrupt Status Enable Register init - * [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable - * [4] ENSTABUFWTRDY : Buffer write Ready Status Enable - * [1] ENSTASTANSCMPLT : Transfre Complete Status Enable - * [0] ENSTACMDCMPLT : Command Complete Status Enable - */ - mask = readl(&host->reg->norintstsen); - mask &= ~(0xffff); - mask |= (1 << 5) | (1 << 4) | (1 << 1) | (1 << 0); - writel(mask, &host->reg->norintstsen); - - /* - * NORMAL Interrupt Signal Enable Register init - * [1] ENSTACMDCMPLT : Transfer Complete Signal Enable - */ - mask = readl(&host->reg->norintsigen); - mask &= ~(0xffff); - mask |= (1 << 1); - writel(mask, &host->reg->norintsigen); - - return 0; -} - -static int s5p_mmc_initialize(int dev_index, int bus_width) -{ - struct mmc *mmc; - - mmc = &mmc_dev[dev_index]; - - sprintf(mmc->name, "SAMSUNG SD/MMC"); - mmc->priv = &mmc_host[dev_index]; - mmc->send_cmd = mmc_send_cmd; - mmc->set_ios = mmc_set_ios; - mmc->init = mmc_core_init; - - mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; - if (bus_width == 8) - mmc->host_caps = MMC_MODE_8BIT; - else - mmc->host_caps = MMC_MODE_4BIT; - mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; - - mmc->f_min = 400000; - mmc->f_max = 52000000; - - mmc_host[dev_index].clock = 0; - mmc_host[dev_index].reg = s5p_get_base_mmc(dev_index); - mmc->m_bmax = 0; - mmc_register(mmc); - - return 0; -} - -int s5p_mmc_init(int dev_index, int bus_width) -{ - return s5p_mmc_initialize(dev_index, bus_width); -} diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c new file mode 100644 index 0000000..668c28b --- /dev/null +++ b/drivers/mmc/sdhci.c @@ -0,0 +1,478 @@ +/* + * (C) Copyright 2009 SAMSUNG Electronics + * Minkyu Kang mk7.kang@samsung.com + * Jaehoon Chung jh80.chung@samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <common.h> +#include <mmc.h> +#include <asm/io.h> +#include <asm/arch/mmc.h> + +/* support 4 mmc hosts */ +struct mmc mmc_dev[4]; +struct mmc_host mmc_host[4]; + +static inline struct s5p_mmc *s5p_get_base_mmc(int dev_index) +{ + unsigned long offset = dev_index * sizeof(struct s5p_mmc); + return (struct s5p_mmc *)(samsung_get_base_mmc() + offset); +} + +static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data) +{ + unsigned char ctrl; + + debug("data->dest: %08x\n", (u32)data->dest); + writel((u32)data->dest, &host->reg->sysad); + /* + * DMASEL[4:3] + * 00 = Selects SDMA + * 01 = Reserved + * 10 = Selects 32-bit Address ADMA2 + * 11 = Selects 64-bit Address ADMA2 + */ + ctrl = readb(&host->reg->hostctl); + ctrl &= ~(3 << 3); + writeb(ctrl, &host->reg->hostctl); + + /* We do not handle DMA boundaries, so set it to max (512 KiB) */ + writew((7 << 12) | (data->blocksize & 0xFFF), &host->reg->blksize); + writew(data->blocks, &host->reg->blkcnt); +} + +static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data) +{ + unsigned short mode; + + /* + * TRNMOD + * MUL1SIN0[5] : Multi/Single Block Select + * RD1WT0[4] : Data Transfer Direction Select + * 1 = read + * 0 = write + * ENACMD12[2] : Auto CMD12 Enable + * ENBLKCNT[1] : Block Count Enable + * ENDMA[0] : DMA Enable + */ + mode = (1 << 1) | (1 << 0); + if (data->blocks > 1) + mode |= (1 << 5); + if (data->flags & MMC_DATA_READ) + mode |= (1 << 4); + + writew(mode, &host->reg->trnmod); +} + +static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct mmc_host *host = (struct mmc_host *)mmc->priv; + int flags, i; + unsigned int timeout; + unsigned int mask; + unsigned int retry = 0x100000; + + /* Wait max 10 ms */ + timeout = 10; + + /* + * PRNSTS + * CMDINHDAT[1] : Command Inhibit (DAT) + * CMDINHCMD[0] : Command Inhibit (CMD) + */ + mask = (1 << 0); + if ((data != NULL) || (cmd->resp_type & MMC_RSP_BUSY)) + mask |= (1 << 1); + + /* + * We shouldn't wait for data inihibit for stop commands, even + * though they might use busy signaling + */ + if (data) + mask &= ~(1 << 1); + + while (readl(&host->reg->prnsts) & mask) { + if (timeout == 0) { + printf("%s: timeout error\n", __func__); + return -1; + } + timeout--; + udelay(1000); + } + + if (data) + mmc_prepare_data(host, data); + + debug("cmd->arg: %08x\n", cmd->cmdarg); + writel(cmd->cmdarg, &host->reg->argument); + + if (data) + mmc_set_transfer_mode(host, data); + + if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY)) + return -1; + + /* + * CMDREG + * CMDIDX[13:8] : Command index + * DATAPRNT[5] : Data Present Select + * ENCMDIDX[4] : Command Index Check Enable + * ENCMDCRC[3] : Command CRC Check Enable + * RSPTYP[1:0] + * 00 = No Response + * 01 = Length 136 + * 10 = Length 48 + * 11 = Length 48 Check busy after response + */ + if (!(cmd->resp_type & MMC_RSP_PRESENT)) + flags = 0; + else if (cmd->resp_type & MMC_RSP_136) + flags = (1 << 0); + else if (cmd->resp_type & MMC_RSP_BUSY) + flags = (3 << 0); + else + flags = (2 << 0); + + if (cmd->resp_type & MMC_RSP_CRC) + flags |= (1 << 3); + if (cmd->resp_type & MMC_RSP_OPCODE) + flags |= (1 << 4); + if (data) + flags |= (1 << 5); + + debug("cmd: %d\n", cmd->cmdidx); + + writew((cmd->cmdidx << 8) | flags, &host->reg->cmdreg); + + for (i = 0; i < retry; i++) { + mask = readl(&host->reg->norintsts); + /* Command Complete */ + if (mask & (1 << 0)) { + if (!data) + writel(mask, &host->reg->norintsts); + break; + } + } + + if (i == retry) { + printf("%s: waiting for status update\n", __func__); + return TIMEOUT; + } + + if (mask & (1 << 16)) { + /* Timeout Error */ + debug("timeout: %08x cmd %d\n", mask, cmd->cmdidx); + return TIMEOUT; + } else if (mask & (1 << 15)) { + /* Error Interrupt */ + debug("error: %08x cmd %d\n", mask, cmd->cmdidx); + return -1; + } + + if (cmd->resp_type & MMC_RSP_PRESENT) { + if (cmd->resp_type & MMC_RSP_136) { + /* CRC is stripped so we need to do some shifting. */ + for (i = 0; i < 4; i++) { + unsigned int offset = + (unsigned int)(&host->reg->rspreg3 - i); + cmd->response[i] = readl(offset) << 8; + + if (i != 3) { + cmd->response[i] |= + readb(offset - 1); + } + debug("cmd->resp[%d]: %08x\n", + i, cmd->response[i]); + } + } else if (cmd->resp_type & MMC_RSP_BUSY) { + for (i = 0; i < retry; i++) { + /* PRNTDATA[23:20] : DAT[3:0] Line Signal */ + if (readl(&host->reg->prnsts) + & (1 << 20)) /* DAT[0] */ + break; + } + + if (i == retry) { + printf("%s: card is still busy\n", __func__); + return TIMEOUT; + } + + cmd->response[0] = readl(&host->reg->rspreg0); + debug("cmd->resp[0]: %08x\n", cmd->response[0]); + } else { + cmd->response[0] = readl(&host->reg->rspreg0); + debug("cmd->resp[0]: %08x\n", cmd->response[0]); + } + } + + if (data) { + while (1) { + mask = readl(&host->reg->norintsts); + + if (mask & (1 << 15)) { + /* Error Interrupt */ + writel(mask, &host->reg->norintsts); + printf("%s: error during transfer: 0x%08x\n", + __func__, mask); + return -1; + } else if (mask & (1 << 3)) { + /* DMA Interrupt */ + debug("DMA end\n"); + break; + } else if (mask & (1 << 1)) { + /* Transfer Complete */ + debug("r/w is done\n"); + break; + } + } + writel(mask, &host->reg->norintsts); + } + + udelay(1000); + return 0; +} + +static void mmc_change_clock(struct mmc_host *host, uint clock) +{ + int div; + unsigned short clk; + unsigned long timeout; + unsigned long ctrl2; + + /* + * SELBASECLK[5:4] + * 00/01 = HCLK + * 10 = EPLL + * 11 = XTI or XEXTCLK + */ + ctrl2 = readl(&host->reg->control2); + ctrl2 &= ~(3 << 4); + ctrl2 |= (2 << 4); + writel(ctrl2, &host->reg->control2); + + writew(0, &host->reg->clkcon); + + /* XXX: we assume that clock is between 40MHz and 50MHz */ + if (clock == 0) + goto out; + else if (clock <= 400000) + div = 0x100; + else if (clock <= 20000000) + div = 4; + else if (clock <= 26000000) + div = 2; + else + div = 1; + debug("div: %d\n", div); + + div >>= 1; + /* + * CLKCON + * SELFREQ[15:8] : base clock divied by value + * ENSDCLK[2] : SD Clock Enable + * STBLINTCLK[1] : Internal Clock Stable + * ENINTCLK[0] : Internal Clock Enable + */ + clk = (div << 8) | (1 << 0); + writew(clk, &host->reg->clkcon); + + /* Wait max 10 ms */ + timeout = 10; + while (!(readw(&host->reg->clkcon) & (1 << 1))) { + if (timeout == 0) { + printf("%s: timeout error\n", __func__); + return; + } + timeout--; + udelay(1000); + } + + clk |= (1 << 2); + writew(clk, &host->reg->clkcon); + +out: + host->clock = clock; +} + +static void mmc_set_ios(struct mmc *mmc) +{ + struct mmc_host *host = mmc->priv; + unsigned char ctrl; + unsigned long val; + + debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock); + + /* + * SELCLKPADDS[17:16] + * 00 = 2mA + * 01 = 4mA + * 10 = 7mA + * 11 = 9mA + */ + writel(0x3 << 16, &host->reg->control4); + + val = readl(&host->reg->control2); + val &= (0x3 << 4); + + val |= (1 << 31) | /* write status clear async mode enable */ + (1 << 30) | /* command conflict mask enable */ + (1 << 14) | /* Feedback Clock Enable for Rx Clock */ + (1 << 8); /* SDCLK hold enable */ + + writel(val, &host->reg->control2); + + /* + * FCSEL1[15] FCSEL0[7] + * FCSel[1:0] : Rx Feedback Clock Delay Control + * Inverter delay means10ns delay if SDCLK 50MHz setting + * 01 = Delay1 (basic delay) + * 11 = Delay2 (basic delay + 2ns) + * 00 = Delay3 (inverter delay) + * 10 = Delay4 (inverter delay + 2ns) + */ + writel(0x8080, &host->reg->control3); + + mmc_change_clock(host, mmc->clock); + + ctrl = readb(&host->reg->hostctl); + + /* + * WIDE8[5] + * 0 = Depend on WIDE4 + * 1 = 8-bit mode + * WIDE4[1] + * 1 = 4-bit mode + * 0 = 1-bit mode + */ + if (mmc->bus_width == 8) + ctrl |= (1 << 5); + else if (mmc->bus_width == 4) + ctrl |= (1 << 1); + else + ctrl &= ~(1 << 1); + + /* + * OUTEDGEINV[2] + * 1 = Riging edge output + * 0 = Falling edge output + */ + ctrl &= ~(1 << 2); + + writeb(ctrl, &host->reg->hostctl); +} + +static void mmc_reset(struct mmc_host *host) +{ + unsigned int timeout; + + /* + * RSTALL[0] : Software reset for all + * 1 = reset + * 0 = work + */ + writeb((1 << 0), &host->reg->swrst); + + host->clock = 0; + + /* Wait max 100 ms */ + timeout = 100; + + /* hw clears the bit when it's done */ + while (readb(&host->reg->swrst) & (1 << 0)) { + if (timeout == 0) { + printf("%s: timeout error\n", __func__); + return; + } + timeout--; + udelay(1000); + } +} + +static int mmc_core_init(struct mmc *mmc) +{ + struct mmc_host *host = (struct mmc_host *)mmc->priv; + unsigned int mask; + + mmc_reset(host); + + host->version = readw(&host->reg->hcver); + + /* mask all */ + writel(0xffffffff, &host->reg->norintstsen); + writel(0xffffffff, &host->reg->norintsigen); + + writeb(0xe, &host->reg->timeoutcon); /* TMCLK * 2^27 */ + + /* + * NORMAL Interrupt Status Enable Register init + * [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable + * [4] ENSTABUFWTRDY : Buffer write Ready Status Enable + * [1] ENSTASTANSCMPLT : Transfre Complete Status Enable + * [0] ENSTACMDCMPLT : Command Complete Status Enable + */ + mask = readl(&host->reg->norintstsen); + mask &= ~(0xffff); + mask |= (1 << 5) | (1 << 4) | (1 << 1) | (1 << 0); + writel(mask, &host->reg->norintstsen); + + /* + * NORMAL Interrupt Signal Enable Register init + * [1] ENSTACMDCMPLT : Transfer Complete Signal Enable + */ + mask = readl(&host->reg->norintsigen); + mask &= ~(0xffff); + mask |= (1 << 1); + writel(mask, &host->reg->norintsigen); + + return 0; +} + +static int s5p_mmc_initialize(int dev_index, int bus_width) +{ + struct mmc *mmc; + + mmc = &mmc_dev[dev_index]; + + sprintf(mmc->name, "SAMSUNG SD/MMC"); + mmc->priv = &mmc_host[dev_index]; + mmc->send_cmd = mmc_send_cmd; + mmc->set_ios = mmc_set_ios; + mmc->init = mmc_core_init; + + mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; + if (bus_width == 8) + mmc->host_caps = MMC_MODE_8BIT; + else + mmc->host_caps = MMC_MODE_4BIT; + mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; + + mmc->f_min = 400000; + mmc->f_max = 52000000; + + mmc_host[dev_index].clock = 0; + mmc_host[dev_index].reg = s5p_get_base_mmc(dev_index); + mmc->m_bmax = 0; + mmc_register(mmc); + + return 0; +} + +int s5p_mmc_init(int dev_index, int bus_width) +{ + return s5p_mmc_initialize(dev_index, bus_width); +}