Am Mi., 23. Mai 2018 um 11:48 Uhr schrieb Bin Meng bmeng.cn@gmail.com:
On Mon, May 14, 2018 at 5:32 PM, Christian Gmeiner christian.gmeiner@gmail.com wrote:
Starting with cpuid level 0x16 (Skylake-based processors) it is possible to get CPU base freq via cpuid.
This fixes booting on a skylake based system.
Signed-off-by: Christian Gmeiner christian.gmeiner@gmail.com
drivers/timer/tsc_timer.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-)
diff --git a/drivers/timer/tsc_timer.c b/drivers/timer/tsc_timer.c index c7fefd2031..96a3e55513 100644 --- a/drivers/timer/tsc_timer.c +++ b/drivers/timer/tsc_timer.c @@ -21,6 +21,17 @@
DECLARE_GLOBAL_DATA_PTR;
+static unsigned long cpu_mhz_from_cpuid(void) +{
if (gd->arch.x86_vendor != X86_VENDOR_INTEL)return 0;if (cpuid_eax(0) < 0x16)return 0;return cpuid_eax(0x16);+}
/*
- According to Intel 64 and IA-32 System Programming Guide,
- if MSR_PERF_STAT[31] is set, the maximum resolved bus ratio can be
@@ -343,14 +354,22 @@ static void tsc_timer_ensure_setup(void) if (!gd->arch.clock_rate) { unsigned long fast_calibrate;
fast_calibrate = cpu_mhz_from_cpuid();if (fast_calibrate)goto done;fast_calibrate = cpu_mhz_from_msr();
if (!fast_calibrate) {fast_calibrate = quick_pit_calibrate();if (!fast_calibrate)panic("TSC frequency is ZERO");}
if (fast_calibrate)goto done;fast_calibrate = quick_pit_calibrate();if (fast_calibrate)goto done;panic("TSC frequency is ZERO");
gd->arch.clock_rate = fast_calibrate * 1000000;
done:
nits: this indention is wrong, and will cause checkpatch warnings.
Oops.
gd->arch.clock_rate = fast_calibrate * 1000000; }}
Reviewed-by: Bin Meng bmeng.cn@gmail.com
I can fix the nits when applying.
That would be great - thanks!