Hi Lukasz
On Sun, 2019-02-03 at 00:02 +0100, Lukasz Majewski wrote:
As the I2C2 clock is now enabled in the generic clock code, we can remove this code from a board file.
Signed-off-by: Lukasz Majewski lukma@denx.de
Tested-by: Marcel Ziswiler marcel.ziswiler@toradex.com
Changes in v3:
- New patch (separate board code patch)
Changes in v2: None
board/phytec/pcm052/pcm052.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/phytec/pcm052/pcm052.c b/board/phytec/pcm052/pcm052.c index f988af2abc..cfc8009102 100644 --- a/board/phytec/pcm052/pcm052.c +++ b/board/phytec/pcm052/pcm052.c @@ -485,7 +485,7 @@ static void clock_init(void) clrsetbits_le32(&ccm->ccgr9, CCM_REG_CTRL_MASK, CCM_CCGR9_FEC0_CTRL_MASK | CCM_CCGR9_FEC1_CTRL_MASK); clrsetbits_le32(&ccm->ccgr10, CCM_REG_CTRL_MASK,
CCM_CCGR10_NFC_CTRL_MASK |CCM_CCGR10_I2C2_CTRL_MASK);
CCM_CCGR10_NFC_CTRL_MASK);clrsetbits_le32(&anadig->pll2_ctrl, ANADIG_PLL2_CTRL_POWERDOWN, ANADIG_PLL2_CTRL_ENABLE |
ANADIG_PLL2_CTRL_DIV_SELECT);
I can confirm that a similar change also works on Colibri VF50/VF61 albeit there on I2C0 rather than I2C2.
Cheers
Marcel