Hi,
Remy Bohmer wrote:
Hello Michael,
2008/12/12 Michael Trimarchi trimarchi@gandalf.sssup.it:
EHCI fix code and ixp4xx test. USB ehci configuration parameter:
#define CONFIG_CMD_USB 1 #define CONFIG_USB_STORAGE 1 #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_IXP4XX 1 #define CONFIG_EHCI_IS_TDI 1 #define CONFIG_EHCI_DESC_BIG_ENDIAN 1 #define CONFIG_EHCI_MMIO_BIG_ENDIAN 1 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 #define CONFIG_LEGACY_USB_INIT_SEQ 1
2 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found => usb tree
Device Tree: 1 Hub (1.5MBit/s, 0mA) | u-boot EHCI Host Controller | |+-2 Mass Storage (12MBit/s, 100mA) Sony Storage Media 0C07040930296
=>
Signed-off-by: Michael Trimarchi trimarchimichael@yahoo.it
drivers/usb/usb_ehci.h | 51 ++++++++++-------- drivers/usb/usb_ehci_core.c | 127 ++++++++++++++++++++++++++----------------- 2 files changed, 106 insertions(+), 72 deletions(-)
Applied to u-boot-usb (next)
I had some weird problems re-basing your patches, it looked like git choked on the [PATCH] keyword in the headers, resulting in different patch titles and it was complaining about empty commits. Can you please review if the next-tree is still as you expect? (I believe I fixed it all, so I expect no real problems)
Thanks,
Remy
Thank's a lot, I'll check later. I have these things in my todo list: - ehci-pci.c support to the usb pci device - create an ehci struct that contains controller description - rebase the ixp465 patch and then add the usb_ehci_ixp4xx support
Is it ok? are there any suggests?
Michael