It is not a parse error to have a default value of "0" for a "hex" type entry, instead of "0x0". However, "0" and "0x0" are not treated the same even by the tools themselves. Correct this by changing the default value from "0" to "0x0" for all hex type questions that had the incorrect default. Fix one instance (in two configs) of a default of "0" being used on a hex question to be "0x0". Remove the cases where a defconfig had set a value of "0x0" to be used as the default had been "0".
Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/cpu/armv7/ls102xa/Kconfig | 1 - arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 2 +- arch/arm/mach-imx/Kconfig | 2 +- arch/arm/mach-imx/imx8/Kconfig | 4 ++-- arch/arm/mach-rockchip/Kconfig | 2 +- arch/arm/mach-sunxi/Kconfig | 4 ++-- arch/powerpc/cpu/mpc8xx/Kconfig | 2 +- boot/Kconfig | 2 +- cmd/Kconfig | 8 ++++---- common/Kconfig | 2 +- common/spl/Kconfig | 2 +- common/spl/Kconfig.tpl | 2 +- configs/am335x_guardian_defconfig | 1 - configs/efi-x86_app32_defconfig | 2 +- configs/efi-x86_app64_defconfig | 2 +- configs/evb-rk3229_defconfig | 1 - configs/evb-rk3308_defconfig | 1 - configs/imx6q_logic_defconfig | 1 - configs/imx8mm_data_modul_edm_sbc_defconfig | 1 - configs/imx8mn_beacon_2g_defconfig | 1 - configs/imx8mn_beacon_defconfig | 1 - configs/imx8mn_beacon_fspi_defconfig | 1 - configs/imx8mp_beacon_defconfig | 1 - configs/imx8mp_data_modul_edm_sbc_defconfig | 1 - configs/imx8mp_dhcom_pdk2_defconfig | 1 - configs/imx8mp_dhcom_pdk3_defconfig | 1 - configs/kontron_sl28_defconfig | 2 -- configs/lion-rk3368_defconfig | 1 - configs/roc-cc-rk3308_defconfig | 1 - configs/rock-pi-s-rk3308_defconfig | 1 - configs/sandbox64_defconfig | 1 - configs/sandbox_defconfig | 1 - configs/sandbox_flattree_defconfig | 1 - configs/sandbox_noinst_defconfig | 1 - configs/sandbox_spl_defconfig | 1 - configs/sandbox_vpl_defconfig | 1 - configs/xilinx_versal_net_virt_defconfig | 1 - configs/xilinx_zynqmp_virt_defconfig | 1 - drivers/block/Kconfig | 2 +- drivers/fastboot/Kconfig | 2 +- drivers/i2c/Kconfig | 16 ++++++++-------- drivers/misc/Kconfig | 2 +- drivers/serial/Kconfig | 6 +++--- drivers/usb/gadget/Kconfig | 2 +- drivers/video/Kconfig | 4 ++-- env/Kconfig | 4 ++-- lib/Kconfig | 2 +- 47 files changed, 38 insertions(+), 64 deletions(-)
diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig index 3e292bf70e18..46ace7e5fd68 100644 --- a/arch/arm/cpu/armv7/ls102xa/Kconfig +++ b/arch/arm/cpu/armv7/ls102xa/Kconfig @@ -98,7 +98,6 @@ config SYS_FSL_ERRATUM_A008407
config SYS_FSL_QSPI_SKIP_CLKSEL bool "Skip setting QSPI clock during SoC init" - default 0 help To improve startup times when booting from QSPI flash, the QSPI frequency can be set very early in the boot process. If this option diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index a8b493e2f875..d46934c2dcff 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -739,7 +739,7 @@ config HAS_FSL_XHCI_USB config SYS_FSL_BOOTROM_BASE hex depends on FSL_LSCH2 - default 0 + default 0x0
config SYS_FSL_BOOTROM_SIZE hex diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index d94b5828d0d4..2136ab7e9eb3 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -181,7 +181,7 @@ config IMX8_ROMAPI config SPL_IMX_ROMAPI_LOADADDR hex "Default load address to load image through ROM API" depends on IMX8_ROMAPI || SPL_BOOTROM_SUPPORT - default 0 + default 0x0
config IMX_DCD_ADDR hex "DCD Blocks location on the image" diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig index 15f844f50302..59d11b3179ef 100644 --- a/arch/arm/mach-imx/imx8/Kconfig +++ b/arch/arm/mach-imx/imx8/Kconfig @@ -34,11 +34,11 @@ config SYS_SOC
config BOOTAUX_RESERVED_MEM_BASE hex "i.MX auxiliary core dram memory base" - default 0 + default 0x0
config BOOTAUX_RESERVED_MEM_SIZE hex "i.MX auxiliary core dram memory size" - default 0 + default 0x0
choice prompt "i.MX8 board select" diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 49da93d54b45..4569a9ce283c 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -469,7 +469,7 @@ config ROCKCHIP_STIMER_BASE
config ROCKCHIP_SPL_RESERVE_IRAM hex "Size of IRAM reserved in SPL" - default 0 + default 0x0 help SPL may need reserve memory for firmware loaded by SPL, whose load address is in IRAM and may overlay with SPL text area if not diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index e20c3a3ee926..9d5df2c10273 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -568,7 +568,7 @@ config DRAM_EMR1
config DRAM_TPR3 hex "sunxi dram tpr3 value" - default 0 + default 0x0 ---help--- Set the dram controller tpr3 parameter. This parameter configures the delay on the command lane and also phase shifts, which are @@ -579,7 +579,7 @@ config DRAM_TPR3
config DRAM_DQS_GATING_DELAY hex "sunxi dram dqs_gating_delay value" - default 0 + default 0x0 ---help--- Set the dram controller dqs_gating_delay parmeter. Each byte encodes the DQS gating delay for each byte lane. The delay diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig index bd2af8dc10e8..1731c965ad98 100644 --- a/arch/powerpc/cpu/mpc8xx/Kconfig +++ b/arch/powerpc/cpu/mpc8xx/Kconfig @@ -94,7 +94,7 @@ config SYS_SIUMCR
config SYS_SYPCR hex "SYPCR register" if !WDT_MPC8xxx - default 0 + default 0x0 help System Protection Control (11-9)
diff --git a/boot/Kconfig b/boot/Kconfig index e8fb03b80168..b00d7a8d11ec 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -1007,7 +1007,7 @@ config BOOTSTAGE_STASH
config BOOTSTAGE_STASH_ADDR hex "Address to stash boot timing information" - default 0 + default 0x0 help Provide an address which will not be overwritten by the OS when it starts, so that it can read this information when ready. diff --git a/cmd/Kconfig b/cmd/Kconfig index 2d6e5f993f04..bb9eee393811 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -517,7 +517,7 @@ config CMD_SPL config CMD_SPL_NAND_OFS hex "Offset of OS args or dtb for Falcon-mode NAND boot" depends on CMD_SPL && (TPL_NAND_SUPPORT || SPL_NAND_SUPPORT) - default 0 + default 0x0 help This provides the offset of the command line arguments for Linux when booting from NAND in Falcon mode. See doc/README.falcon @@ -527,7 +527,7 @@ config CMD_SPL_NAND_OFS config CMD_SPL_NOR_OFS hex "Offset of OS args or dtb for Falcon-mode NOR boot" depends on CMD_SPL && SPL_NOR_SUPPORT - default 0 + default 0x0 help This provides the offset of the command line arguments or dtb for Linux when booting from NOR in Falcon mode. @@ -1513,7 +1513,7 @@ config DEFAULT_SPI_BUS config DEFAULT_SPI_MODE hex "default spi mode used by sspi command (see include/spi.h)" depends on CMD_SPI - default 0 + default 0x0
config CMD_TEMPERATURE bool "temperature - display the temperature from thermal sensors" @@ -1804,7 +1804,7 @@ config BOOTP_PXE_CLIENTARCH depends on BOOTP_PXE default 0x16 if ARM64 default 0x15 if ARM - default 0 if X86 + default 0x0 if X86
config BOOTP_VCI_STRING string diff --git a/common/Kconfig b/common/Kconfig index 973482f07566..a2dcc56a8d0f 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -1028,7 +1028,7 @@ config BLOBLIST_SIZE config BLOBLIST_SIZE_RELOC hex "Size of bloblist after relocation" default BLOBLIST_SIZE if BLOBLIST_FIXED || BLOBLIST_ALLOC - default 0 if BLOBLIST_PASSAGE + default 0x0 if BLOBLIST_PASSAGE help Sets the size of the bloblist in bytes after relocation. Since U-Boot has a lot more memory available then, it is possible to use a larger diff --git a/common/spl/Kconfig b/common/spl/Kconfig index bee231b583a3..ecc616f8abcf 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -67,7 +67,7 @@ config SPL_SIZE_LIMIT_SUBTRACT_MALLOC config SPL_SIZE_LIMIT_PROVIDE_STACK hex "SPL image size check: provide stack space before relocation" depends on SPL_SIZE_LIMIT > 0 - default 0 + default 0x0 help If set, this size is reserved in SPL_SIZE_LIMIT check to ensure such an image does not overflow SRAM if SPL_SIZE_LIMIT describes the size diff --git a/common/spl/Kconfig.tpl b/common/spl/Kconfig.tpl index 3d6cf1e59f31..cc71578f6466 100644 --- a/common/spl/Kconfig.tpl +++ b/common/spl/Kconfig.tpl @@ -126,7 +126,7 @@ config TPL_POWER
config TPL_TEXT_BASE hex "Base address for the .text section of the TPL stage" - default 0 + default 0x0 help The base address for the .text section of the TPL stage.
diff --git a/configs/am335x_guardian_defconfig b/configs/am335x_guardian_defconfig index a485cc65eaf5..7c4085d0849f 100644 --- a/configs/am335x_guardian_defconfig +++ b/configs/am335x_guardian_defconfig @@ -17,7 +17,6 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SPL=y -CONFIG_BOOTSTAGE_STASH_ADDR=0x0 CONFIG_ENV_OFFSET_REDUND=0x540000 CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_SYS_MEMTEST_START=0x80000000 diff --git a/configs/efi-x86_app32_defconfig b/configs/efi-x86_app32_defconfig index 50975dbfaafc..1bfc01f060d4 100644 --- a/configs/efi-x86_app32_defconfig +++ b/configs/efi-x86_app32_defconfig @@ -2,7 +2,7 @@ CONFIG_X86=y CONFIG_NR_DRAM_BANKS=8 CONFIG_ENV_SIZE=0x1000 CONFIG_DEFAULT_DEVICE_TREE="efi-x86_app" -CONFIG_DEBUG_UART_BASE=0 +CONFIG_DEBUG_UART_BASE=0x0 CONFIG_DEBUG_UART_CLOCK=0 CONFIG_VENDOR_EFI=y CONFIG_TARGET_EFI_APP32=y diff --git a/configs/efi-x86_app64_defconfig b/configs/efi-x86_app64_defconfig index 0fc358ddcdfb..46a1900c704b 100644 --- a/configs/efi-x86_app64_defconfig +++ b/configs/efi-x86_app64_defconfig @@ -2,7 +2,7 @@ CONFIG_X86=y CONFIG_NR_DRAM_BANKS=8 CONFIG_ENV_SIZE=0x1000 CONFIG_DEFAULT_DEVICE_TREE="efi-x86_app" -CONFIG_DEBUG_UART_BASE=0 +CONFIG_DEBUG_UART_BASE=0x0 CONFIG_DEBUG_UART_CLOCK=0 CONFIG_X86_RUN_64BIT=y CONFIG_VENDOR_EFI=y diff --git a/configs/evb-rk3229_defconfig b/configs/evb-rk3229_defconfig index 73015f098c2b..625ca9db750b 100644 --- a/configs/evb-rk3229_defconfig +++ b/configs/evb-rk3229_defconfig @@ -12,7 +12,6 @@ CONFIG_ENV_OFFSET=0x3F8000 CONFIG_DEFAULT_DEVICE_TREE="rk3229-evb" CONFIG_SPL_TEXT_BASE=0x60000000 CONFIG_ROCKCHIP_RK322X=y -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0 CONFIG_TARGET_EVB_RK3229=y CONFIG_SPL_STACK_R_ADDR=0x60600000 CONFIG_DEBUG_UART_BASE=0x11030000 diff --git a/configs/evb-rk3308_defconfig b/configs/evb-rk3308_defconfig index a13a809c1ef8..d1e78582a3aa 100644 --- a/configs/evb-rk3308_defconfig +++ b/configs/evb-rk3308_defconfig @@ -11,7 +11,6 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_DEFAULT_DEVICE_TREE="rk3308-evb" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_RK3308=y -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0 CONFIG_SPL_DRIVERS_MISC=y CONFIG_TARGET_EVB_RK3308=y CONFIG_SPL_STACK_R_ADDR=0xc00000 diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig index 2814e2c81479..74733c4de323 100644 --- a/configs/imx6q_logic_defconfig +++ b/configs/imx6q_logic_defconfig @@ -86,7 +86,6 @@ CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 CONFIG_FSL_USDHC=y CONFIG_MTD=y CONFIG_DM_MTD=y diff --git a/configs/imx8mm_data_modul_edm_sbc_defconfig b/configs/imx8mm_data_modul_edm_sbc_defconfig index f63eb4fd64cd..e2bca406113f 100644 --- a/configs/imx8mm_data_modul_edm_sbc_defconfig +++ b/configs/imx8mm_data_modul_edm_sbc_defconfig @@ -233,6 +233,5 @@ CONFIG_USB_GADGET_MANUFACTURER="Data Modul" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y -CONFIG_SDP_LOADADDR=0x0 CONFIG_USB_FUNCTION_ACM=y CONFIG_IMX_WATCHDOG=y diff --git a/configs/imx8mn_beacon_2g_defconfig b/configs/imx8mn_beacon_2g_defconfig index fab3ab154b57..975fcc2481aa 100644 --- a/configs/imx8mn_beacon_2g_defconfig +++ b/configs/imx8mn_beacon_2g_defconfig @@ -142,4 +142,3 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y -CONFIG_SDP_LOADADDR=0x0 diff --git a/configs/imx8mn_beacon_defconfig b/configs/imx8mn_beacon_defconfig index f810d4be6109..f4ecdc88f39c 100644 --- a/configs/imx8mn_beacon_defconfig +++ b/configs/imx8mn_beacon_defconfig @@ -149,5 +149,4 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y -CONFIG_SDP_LOADADDR=0x0 CONFIG_IMX_WATCHDOG=y diff --git a/configs/imx8mn_beacon_fspi_defconfig b/configs/imx8mn_beacon_fspi_defconfig index 8705d9bccc45..f5e57fb50bca 100644 --- a/configs/imx8mn_beacon_fspi_defconfig +++ b/configs/imx8mn_beacon_fspi_defconfig @@ -149,7 +149,6 @@ CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y -CONFIG_SDP_LOADADDR=0x0 CONFIG_IMX_WATCHDOG=y CONFIG_FSPI_CONF_HEADER=y CONFIG_FSPI_CONF_FILE="fspi_header.bin" diff --git a/configs/imx8mp_beacon_defconfig b/configs/imx8mp_beacon_defconfig index 2570eb6a8850..c6a3e35e73a3 100644 --- a/configs/imx8mp_beacon_defconfig +++ b/configs/imx8mp_beacon_defconfig @@ -172,7 +172,6 @@ CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x1fc9 CONFIG_USB_GADGET_PRODUCT_NUM=0x0152 -CONFIG_SDP_LOADADDR=0x0 CONFIG_USB_FUNCTION_ACM=y CONFIG_USB_ETHER=y CONFIG_USB_ETH_CDC=y diff --git a/configs/imx8mp_data_modul_edm_sbc_defconfig b/configs/imx8mp_data_modul_edm_sbc_defconfig index 34a7f179d1ca..4f2d79c74954 100644 --- a/configs/imx8mp_data_modul_edm_sbc_defconfig +++ b/configs/imx8mp_data_modul_edm_sbc_defconfig @@ -258,7 +258,6 @@ CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Data Modul" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 -CONFIG_SDP_LOADADDR=0x0 CONFIG_USB_FUNCTION_ACM=y CONFIG_USB_ETHER=y CONFIG_USB_ETH_CDC=y diff --git a/configs/imx8mp_dhcom_pdk2_defconfig b/configs/imx8mp_dhcom_pdk2_defconfig index 60ab31b6e8eb..c06a8c38d5c0 100644 --- a/configs/imx8mp_dhcom_pdk2_defconfig +++ b/configs/imx8mp_dhcom_pdk2_defconfig @@ -256,7 +256,6 @@ CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="DH electronics" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 -CONFIG_SDP_LOADADDR=0x0 CONFIG_USB_FUNCTION_ACM=y CONFIG_USB_ETHER=y CONFIG_USB_ETH_CDC=y diff --git a/configs/imx8mp_dhcom_pdk3_defconfig b/configs/imx8mp_dhcom_pdk3_defconfig index 6a98a906059f..c1bbb1688a62 100644 --- a/configs/imx8mp_dhcom_pdk3_defconfig +++ b/configs/imx8mp_dhcom_pdk3_defconfig @@ -259,7 +259,6 @@ CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="DH electronics" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 -CONFIG_SDP_LOADADDR=0x0 CONFIG_USB_FUNCTION_ACM=y CONFIG_USB_ETHER=y CONFIG_USB_ETH_CDC=y diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig index 8fe2798c3ccf..21a397933e7f 100644 --- a/configs/kontron_sl28_defconfig +++ b/configs/kontron_sl28_defconfig @@ -20,7 +20,6 @@ CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y CONFIG_SPL_STACK=0x18009ff0 CONFIG_SPL_SIZE_LIMIT=0x20000 -CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x0 CONFIG_SPL=y CONFIG_ENV_OFFSET_REDUND=0x3f0000 CONFIG_SPL_SPI_FLASH_SUPPORT=y @@ -130,7 +129,6 @@ CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_WDT=y CONFIG_WDT_SL28CPLD=y CONFIG_WDT_SP805=y -CONFIG_OF_LIBFDT_ASSUME_MASK=0x0 CONFIG_EFI_SET_TIME=y CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y diff --git a/configs/lion-rk3368_defconfig b/configs/lion-rk3368_defconfig index 7c55b3be0d2f..9c29eb6fed37 100644 --- a/configs/lion-rk3368_defconfig +++ b/configs/lion-rk3368_defconfig @@ -10,7 +10,6 @@ CONFIG_ENV_OFFSET=0x3F8000 CONFIG_DEFAULT_DEVICE_TREE="rk3368-lion-haikou" CONFIG_SPL_TEXT_BASE=0x00000000 CONFIG_ROCKCHIP_RK3368=y -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0 CONFIG_TPL_LIBCOMMON_SUPPORT=y CONFIG_TPL_LIBGENERIC_SUPPORT=y CONFIG_SPL_DRIVERS_MISC=y diff --git a/configs/roc-cc-rk3308_defconfig b/configs/roc-cc-rk3308_defconfig index 9a789b212f10..3f3c223fa1d2 100644 --- a/configs/roc-cc-rk3308_defconfig +++ b/configs/roc-cc-rk3308_defconfig @@ -11,7 +11,6 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_DEFAULT_DEVICE_TREE="rk3308-roc-cc" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_RK3308=y -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0 CONFIG_SPL_DRIVERS_MISC=y CONFIG_TARGET_ROC_RK3308_CC=y CONFIG_SPL_STACK_R_ADDR=0xc00000 diff --git a/configs/rock-pi-s-rk3308_defconfig b/configs/rock-pi-s-rk3308_defconfig index cc3274a98b3f..8c13f7f9c3be 100644 --- a/configs/rock-pi-s-rk3308_defconfig +++ b/configs/rock-pi-s-rk3308_defconfig @@ -11,7 +11,6 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x800000 CONFIG_DEFAULT_DEVICE_TREE="rk3308-rock-pi-s" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_RK3308=y -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x0 CONFIG_SPL_DRIVERS_MISC=y CONFIG_TARGET_EVB_RK3308=y CONFIG_SPL_STACK_R_ADDR=0xc00000 diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig index bf3ef0c4007f..0e079d7bb4d0 100644 --- a/configs/sandbox64_defconfig +++ b/configs/sandbox64_defconfig @@ -4,7 +4,6 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_DEFAULT_DEVICE_TREE="sandbox64" CONFIG_DM_RESET=y CONFIG_PRE_CON_BUF_ADDR=0x100000 -CONFIG_BOOTSTAGE_STASH_ADDR=0x0 CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_PCI=y CONFIG_SANDBOX64=y diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index b6c4f735f2bd..8e0f79cfaf2b 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -4,7 +4,6 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_DEFAULT_DEVICE_TREE="sandbox" CONFIG_DM_RESET=y CONFIG_PRE_CON_BUF_ADDR=0xf0000 -CONFIG_BOOTSTAGE_STASH_ADDR=0x0 CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_PCI=y CONFIG_DEBUG_UART=y diff --git a/configs/sandbox_flattree_defconfig b/configs/sandbox_flattree_defconfig index 8aa295686dcf..c20015db47be 100644 --- a/configs/sandbox_flattree_defconfig +++ b/configs/sandbox_flattree_defconfig @@ -3,7 +3,6 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x2000 CONFIG_DEFAULT_DEVICE_TREE="sandbox" CONFIG_DM_RESET=y -CONFIG_BOOTSTAGE_STASH_ADDR=0x0 CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_PCI=y CONFIG_DEBUG_UART=y diff --git a/configs/sandbox_noinst_defconfig b/configs/sandbox_noinst_defconfig index 2c6aab6c859e..f6e351961e98 100644 --- a/configs/sandbox_noinst_defconfig +++ b/configs/sandbox_noinst_defconfig @@ -10,7 +10,6 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000 CONFIG_SPL=y -CONFIG_BOOTSTAGE_STASH_ADDR=0x0 CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_PCI=y CONFIG_SANDBOX_SPL=y diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig index 8d50162b274a..7e6ee936769e 100644 --- a/configs/sandbox_spl_defconfig +++ b/configs/sandbox_spl_defconfig @@ -10,7 +10,6 @@ CONFIG_SPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000 CONFIG_SPL=y -CONFIG_BOOTSTAGE_STASH_ADDR=0x0 CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_PCI=y CONFIG_SANDBOX_SPL=y diff --git a/configs/sandbox_vpl_defconfig b/configs/sandbox_vpl_defconfig index f3a0fd19a966..9ac800a93c07 100644 --- a/configs/sandbox_vpl_defconfig +++ b/configs/sandbox_vpl_defconfig @@ -15,7 +15,6 @@ CONFIG_TPL_SERIAL=y CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL_SYS_MALLOC_F_LEN=0x8000 CONFIG_SPL=y -CONFIG_BOOTSTAGE_STASH_ADDR=0x0 CONFIG_SYS_LOAD_ADDR=0x0 CONFIG_PCI=y CONFIG_SANDBOX_SPL=y diff --git a/configs/xilinx_versal_net_virt_defconfig b/configs/xilinx_versal_net_virt_defconfig index 97904bdec0ab..54ba0b7c4f25 100644 --- a/configs/xilinx_versal_net_virt_defconfig +++ b/configs/xilinx_versal_net_virt_defconfig @@ -77,7 +77,6 @@ CONFIG_DM_MAILBOX=y CONFIG_ZYNQMP_IPI=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x0 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index c4bbde22067d..0585644f883d 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -11,7 +11,6 @@ CONFIG_DM_RESET=y CONFIG_SPL_STACK_R_ADDR=0x18000000 CONFIG_SPL_STACK=0xfffffffc CONFIG_SPL_SIZE_LIMIT=0x2a000 -CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x0 CONFIG_SPL=y CONFIG_ENV_OFFSET_REDUND=0x1E80000 CONFIG_SPL_SPI_FLASH_SUPPORT=y diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 6baaa6f0711c..1abea3f10db4 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -167,7 +167,7 @@ config SYS_IDE_MAXDEVICE
config SYS_ATA_BASE_ADDR hex "Base address of IDE controller" - default 0 + default 0x0 help This is the address of the IDE controller, from which other addresses are calculated. Each bus is at a fixed offset from this address, diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig index a3df9aa3d0f8..837c6f1180da 100644 --- a/drivers/fastboot/Kconfig +++ b/drivers/fastboot/Kconfig @@ -56,7 +56,7 @@ config FASTBOOT_BUF_ADDR ROCKCHIP_RK3399 default 0x280000 if ROCKCHIP_RK3368 default 0x100000 if ARCH_ZYNQMP - default 0 if SANDBOX + default 0x0 if SANDBOX help The fastboot protocol requires a large memory buffer for downloads. Define this to the starting RAM address to use for diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 5e81698143a1..8e441b7b5e18 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -363,7 +363,7 @@ config SYS_MXC_I2C1_SPEED
config SYS_MXC_I2C1_SLAVE hex "I2C1 Slave" - default 0 + default 0x0 help MXC I2C1 Slave endif @@ -378,7 +378,7 @@ config SYS_MXC_I2C2_SPEED
config SYS_MXC_I2C2_SLAVE hex "I2C2 Slave" - default 0 + default 0x0 help MXC I2C2 Slave endif @@ -392,7 +392,7 @@ config SYS_MXC_I2C3_SPEED
config SYS_MXC_I2C3_SLAVE hex "I2C3 Slave" - default 0 + default 0x0 help MXC I2C3 Slave endif @@ -406,7 +406,7 @@ config SYS_MXC_I2C4_SPEED
config SYS_MXC_I2C4_SLAVE hex "I2C4 Slave" - default 0 + default 0x0 help MXC I2C4 Slave endif @@ -420,7 +420,7 @@ config SYS_MXC_I2C5_SPEED
config SYS_MXC_I2C5_SLAVE hex "I2C5 Slave" - default 0 + default 0x0 help MXC I2C5 Slave endif @@ -434,7 +434,7 @@ config SYS_MXC_I2C6_SPEED
config SYS_MXC_I2C6_SLAVE hex "I2C6 Slave" - default 0 + default 0x0 help MXC I2C6 Slave endif @@ -448,7 +448,7 @@ config SYS_MXC_I2C7_SPEED
config SYS_MXC_I2C7_SLAVE hex "I2C7 Slave" - default 0 + default 0x0 help MXC I2C7 Slave endif @@ -462,7 +462,7 @@ config SYS_MXC_I2C8_SPEED
config SYS_MXC_I2C8_SLAVE hex "I2C8 Slave" - default 0 + default 0x0 help MXC I2C8 Slave endif diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index b9f5c7a37aed..a6e3f62ecb09 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -555,7 +555,7 @@ config SPL_I2C_EEPROM config SYS_I2C_EEPROM_ADDR hex "Chip address of the EEPROM device" depends on ID_EEPROM || I2C_EEPROM || SPL_I2C_EEPROM || CMD_EEPROM || ENV_IS_IN_EEPROM - default 0 + default 0x0
if I2C_EEPROM
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index a1e089962a91..7ca42df6a7e2 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -482,8 +482,8 @@ endchoice config DEBUG_UART_BASE hex "Base address of UART" depends on DEBUG_UART - default 0 if DEBUG_SBI_CONSOLE - default 0 if DEBUG_UART_SANDBOX + default 0x0 if DEBUG_SBI_CONSOLE + default 0x0 if DEBUG_UART_SANDBOX default 0xff000000 if DEBUG_UART_ZYNQ && ARCH_ZYNQMP default 0xe0000000 if DEBUG_UART_ZYNQ && ARCH_ZYNQ help @@ -1139,6 +1139,6 @@ config SYS_SDSR config SYS_SDMR hex "SDMR Value" depends on MPC8XX_CONS - default 0 + default 0x0
endif diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 1cfe60228424..4eccc5e3370e 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -160,7 +160,7 @@ config USB_GADGET_VBUS_DRAW
config SDP_LOADADDR hex "Default load address at SDP_WRITE and SDP_JUMP" - default 0 + default 0x0
# Selected by UDC drivers that support high-speed operation. config USB_GADGET_DUALSPEED diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index e32ce13fb6b9..fe43fbd7004a 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -66,7 +66,7 @@ config VIDEO_PCI_DEFAULT_FB_SIZE hex "Default framebuffer size to use if no drivers request it" default 0x1000000 if X86 default 0x800000 if !X86 && VIDEO_BOCHS - default 0 if !X86 && !VIDEO_BOCHS + default 0x0 if !X86 && !VIDEO_BOCHS help Generally, video drivers request the amount of memory they need for the frame buffer when they are bound, by setting the size field in @@ -1039,7 +1039,7 @@ config SPL_VIDEO_PCI_DEFAULT_FB_SIZE hex "Default framebuffer size to use if no drivers request it at SPL" default 0x1000000 if X86 default 0x800000 if !X86 && VIDEO_BOCHS - default 0 if !X86 && !VIDEO_BOCHS + default 0x0 if !X86 && !VIDEO_BOCHS help Generally, video drivers request the amount of memory they need for the frame buffer when they are bound, by setting the size field in diff --git a/env/Kconfig b/env/Kconfig index 13e32104b4c1..54203faa89ef 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -571,7 +571,7 @@ config ENV_OFFSET default 0xE0000 if ARCH_ZYNQ default 0x1E00000 if ARCH_ZYNQMP default 0x7F40000 if ARCH_VERSAL || ARCH_VERSAL_NET - default 0 if ARC + default 0x0 if ARC default 0x140000 if ARCH_AT91 default 0x260000 if ARCH_OMAP2PLUS default 0x1080000 if MICROBLAZE && ENV_IS_IN_SPI_FLASH @@ -583,7 +583,7 @@ config ENV_OFFSET_REDUND depends on (ENV_IS_IN_EEPROM || ENV_IS_IN_MMC || ENV_IS_IN_NAND || \ ENV_IS_IN_SPI_FLASH) && SYS_REDUNDAND_ENVIRONMENT default 0x10C0000 if MICROBLAZE - default 0 + default 0x0 help Offset from the start of the device (or partition) of the redundant environment location. diff --git a/lib/Kconfig b/lib/Kconfig index 3926652db639..f19487daaf02 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -851,7 +851,7 @@ config OF_LIBFDT config OF_LIBFDT_ASSUME_MASK hex "Mask of conditions to assume for libfdt" depends on OF_LIBFDT || FIT - default 0 + default 0x0 help Use this to change the assumptions made by libfdt about the device tree it is working with. A value of 0 means that no assumptions