There should not be additional spaces when nesting parentheses ("( (...) )"). Fix all instances where this occurs.
Signed-off-by: Mario Six mario.six@gdsys.cc ---
v2 -> v3: * Added proper commit message
v1 -> v2: None
--- drivers/mtd/cfi_flash.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index a1b217cc0c..e8f1739254 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -230,7 +230,7 @@ static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf) uchar val; uchar *cp = (uchar *) cmdbuf;
- for (i = info->portwidth; i > 0; i--){ + for (i = info->portwidth; i > 0; i--) { cword_offset = (info->portwidth-i)%info->chipwidth; #if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA) cp_offset = info->portwidth - i; @@ -511,8 +511,8 @@ static int flash_toggle(flash_info_t *info, flash_sect_t sect, retval = flash_read32(addr) != flash_read32(addr); break; case FLASH_CFI_64BIT: - retval = ( (flash_read32( addr ) != flash_read32( addr )) || - (flash_read32(addr+4) != flash_read32(addr+4)) ); + retval = ((flash_read32(addr) != flash_read32(addr)) || + (flash_read32(addr+4) != flash_read32(addr+4))); break; default: retval = 0; @@ -1719,7 +1719,7 @@ static void cmdset_amd_read_jedec_ids(flash_info_t *info) info->sr_supported = feature & 0x1; }
- switch (info->chipwidth){ + switch (info->chipwidth) { case FLASH_CFI_8BIT: info->device_id = flash_read_uchar(info, FLASH_OFFSET_DEVICE_ID); @@ -1838,7 +1838,7 @@ static int flash_detect_legacy(phys_addr_t base, int banknum) } }
- switch(info->vendor) { + switch (info->vendor) { case CFI_CMDSET_INTEL_PROG_REGIONS: case CFI_CMDSET_INTEL_STANDARD: case CFI_CMDSET_INTEL_EXTENDED: @@ -1925,12 +1925,12 @@ static int __flash_detect_cfi(flash_info_t *info, struct cfi_qry *qry) * modify the unlock address if we are * in compatibility mode */ - if ( /* x8/x16 in x8 mode */ - ((info->chipwidth == FLASH_CFI_BY8) && - (info->interface == FLASH_CFI_X8X16)) || - /* x16/x32 in x16 mode */ - ((info->chipwidth == FLASH_CFI_BY16) && - (info->interface == FLASH_CFI_X16X32))) + if (/* x8/x16 in x8 mode */ + ((info->chipwidth == FLASH_CFI_BY8) && + (info->interface == FLASH_CFI_X8X16)) || + /* x16/x32 in x16 mode */ + ((info->chipwidth == FLASH_CFI_BY16) && + (info->interface == FLASH_CFI_X16X32))) { info->addr_unlock1 = 0xaaa; info->addr_unlock2 = 0x555; -- 2.11.0