[U-Boot] Beagle mux config: nCS5 vs. DMAREQ2?

Hi,

The mux configuration in board/ti/beagle/beagle.h says

MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/ MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1)) /*SYS_nDMA_REQ2*/

The TRM (spruf98p) says sys_ndmareq2 is mux mode 1 for ncs5, not ncs6.

(Possibly not a concern for the BeagleBoard; I'm trying to get dmareq2 working on a custom 3730 board.)

Thanks, Orjan