Add DDR support for Stratix SoC
Signed-off-by: Chin Liang See chin.liang.see@intel.com Signed-off-by: Ley Foon Tan ley.foon.tan@intel.com --- arch/arm/mach-socfpga/include/mach/sdram_s10.h | 183 +++++++++++ arch/arm/mach-socfpga/misc.c | 11 +- drivers/ddr/altera/Makefile | 1 + drivers/ddr/altera/sdram_s10.c | 388 ++++++++++++++++++++++++ 4 files changed, 577 insertions(+), 6 deletions(-) create mode 100644 arch/arm/mach-socfpga/include/mach/sdram_s10.h create mode 100644 drivers/ddr/altera/sdram_s10.c
diff --git a/arch/arm/mach-socfpga/include/mach/sdram_s10.h b/arch/arm/mach-socfpga/include/mach/sdram_s10.h new file mode 100644 index 0000000..91bfc0e --- /dev/null +++ b/arch/arm/mach-socfpga/include/mach/sdram_s10.h @@ -0,0 +1,183 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Copyright (C) 2017-2018 Intel Corporation <www.intel.com> + * + */ + +#ifndef _SDRAM_S10_H_ +#define _SDRAM_S10_H_ + +unsigned long sdram_calculate_size(void); +int sdram_mmr_init_full(unsigned int sdr_phy_reg); +int sdram_calibration_full(void); + +#define DDR_TWR 15 +#define DDR_READ_LATENCY_DELAY 40 +#define DDR_ACTIVATE_FAWBANK 0x1 + +/* ECC HMC registers */ +#define DDRIOCTRL 0x8 +#define DDRCALSTAT 0xc +#define DRAMADDRWIDTH 0xe0 +#define ECCCTRL1 0x100 +#define ECCCTRL2 0x104 +#define ERRINTEN 0x110 +#define INTMODE 0x11c +#define INTSTAT 0x120 +#define AUTOWB_CORRADDR 0x138 +#define ECC_REG2WRECCDATABUS 0x144 +#define ECC_DIAGON 0x150 +#define ECC_DECSTAT 0x154 +#define HPSINTFCSEL 0x210 +#define RSTHANDSHAKECTRL 0x214 +#define RSTHANDSHAKESTAT 0x218 + +#define DDR_HMC_DDRIOCTRL_IOSIZE_MSK 0x00000003 +#define DDR_HMC_DDRCALSTAT_CAL_MSK BIT(0) +#define DDR_HMC_ECCCTL_AWB_CNT_RST_SET_MSK BIT(16) +#define DDR_HMC_ECCCTL_CNT_RST_SET_MSK BIT(8) +#define DDR_HMC_ECCCTL_ECC_EN_SET_MSK BIT(0) +#define DDR_HMC_ECCCTL2_RMW_EN_SET_MSK BIT(8) +#define DDR_HMC_ECCCTL2_AWB_EN_SET_MSK BIT(0) +#define DDR_HMC_ECC_DIAGON_ECCDIAGON_EN_SET_MSK BIT(16) +#define DDR_HMC_ECC_DIAGON_WRDIAGON_EN_SET_MSK BIT(0) +#define DDR_HMC_ERRINTEN_SERRINTEN_EN_SET_MSK BIT(0) +#define DDR_HMC_ERRINTEN_DERRINTEN_EN_SET_MSK BIT(1) +#define DDR_HMC_INTSTAT_SERRPENA_SET_MSK BIT(0) +#define DDR_HMC_INTSTAT_DERRPENA_SET_MSK BIT(1) +#define DDR_HMC_INTSTAT_ADDRMTCFLG_SET_MSK BIT(16) +#define DDR_HMC_INTMODE_INTMODE_SET_MSK BIT(0) +#define DDR_HMC_RSTHANDSHAKE_MASK 0x000000ff +#define DDR_HMC_CORE2SEQ_INT_REQ 0xF +#define DDR_HMC_SEQ2CORE_INT_RESP_MASK BIT(3) +#define DDR_HMC_HPSINTFCSEL_ENABLE_MASK 0x001f1f1f + +/* NOC DDR scheduler */ +#define DDR_SCH_ID_COREID 0 +#define DDR_SCH_ID_REVID 0x4 +#define DDR_SCH_DDRCONF 0x8 +#define DDR_SCH_DDRTIMING 0xc +#define DDR_SCH_DDRMODE 0x10 +#define DDR_SCH_READ_LATENCY 0x14 +#define DDR_SCH_ACTIVATE 0x38 +#define DDR_SCH_DEVTODEV 0x3c +#define DDR_SCH_DDR4TIMING 0x40 + +#define DDR_SCH_DDRTIMING_ACTTOACT_OFF 0 +#define DDR_SCH_DDRTIMING_RDTOMISS_OFF 6 +#define DDR_SCH_DDRTIMING_WRTOMISS_OFF 12 +#define DDR_SCH_DDRTIMING_BURSTLEN_OFF 18 +#define DDR_SCH_DDRTIMING_RDTOWR_OFF 21 +#define DDR_SCH_DDRTIMING_WRTORD_OFF 26 +#define DDR_SCH_DDRTIMING_BWRATIO_OFF 31 +#define DDR_SCH_DDRMOD_BWRATIOEXTENDED_OFF 1 +#define DDR_SCH_ACTIVATE_RRD_OFF 0 +#define DDR_SCH_ACTIVATE_FAW_OFF 4 +#define DDR_SCH_ACTIVATE_FAWBANK_OFF 10 +#define DDR_SCH_DEVTODEV_BUSRDTORD_OFF 0 +#define DDR_SCH_DEVTODEV_BUSRDTOWR_OFF 2 +#define DDR_SCH_DEVTODEV_BUSWRTORD_OFF 4 + +/* HMC MMR IO48 registers */ +#define CTRLCFG0 0x28 +#define CTRLCFG1 0x2c +#define DRAMTIMING0 0x50 +#define CALTIMING0 0x7c +#define CALTIMING1 0x80 +#define CALTIMING2 0x84 +#define CALTIMING3 0x88 +#define CALTIMING4 0x8c +#define CALTIMING9 0xa0 +#define DRAMADDRW 0xa8 +#define DRAMSTS 0xec +#define NIOSRESERVED0 0x110 +#define NIOSRESERVED1 0x114 +#define NIOSRESERVED2 0x118 + +#define DRAMADDRW_CFG_COL_ADDR_WIDTH(x) \ + (((x) >> 0) & 0x1F) +#define DRAMADDRW_CFG_ROW_ADDR_WIDTH(x) \ + (((x) >> 5) & 0x1F) +#define DRAMADDRW_CFG_BANK_ADDR_WIDTH(x) \ + (((x) >> 10) & 0xF) +#define DRAMADDRW_CFG_BANK_GRP_ADDR_WIDTH(x) \ + (((x) >> 14) & 0x3) +#define DRAMADDRW_CFG_CS_ADDR_WIDTH(x) \ + (((x) >> 16) & 0x7) + +#define CTRLCFG0_CFG_MEMTYPE(x) \ + (((x) >> 0) & 0xF) +#define CTRLCFG0_CFG_DIMM_TYPE(x) \ + (((x) >> 4) & 0x7) +#define CTRLCFG0_CFG_AC_POS(x) \ + (((x) >> 7) & 0x3) +#define CTRLCFG0_CFG_CTRL_BURST_LEN(x) \ + (((x) >> 9) & 0x1F) + +#define CTRLCFG1_CFG_DBC3_BURST_LEN(x) \ + (((x) >> 0) & 0x1F) +#define CTRLCFG1_CFG_ADDR_ORDER(x) \ + (((x) >> 5) & 0x3) +#define CTRLCFG1_CFG_CTRL_EN_ECC(x) \ + (((x) >> 7) & 0x1) + +#define DRAMTIMING0_CFG_TCL(x) \ + (((x) >> 0) & 0x7F) + +#define CALTIMING0_CFG_ACT_TO_RDWR(x) \ + (((x) >> 0) & 0x3F) +#define CALTIMING0_CFG_ACT_TO_PCH(x) \ + (((x) >> 6) & 0x3F) +#define CALTIMING0_CFG_ACT_TO_ACT(x) \ + (((x) >> 12) & 0x3F) +#define CALTIMING0_CFG_ACT_TO_ACT_DB(x) \ + (((x) >> 18) & 0x3F) + +#define CALTIMING1_CFG_RD_TO_RD(x) \ + (((x) >> 0) & 0x3F) +#define CALTIMING1_CFG_RD_TO_RD_DC(x) \ + (((x) >> 6) & 0x3F) +#define CALTIMING1_CFG_RD_TO_RD_DB(x) \ + (((x) >> 12) & 0x3F) +#define CALTIMING1_CFG_RD_TO_WR(x) \ + (((x) >> 18) & 0x3F) +#define CALTIMING1_CFG_RD_TO_WR_DC(x) \ + (((x) >> 24) & 0x3F) + +#define CALTIMING2_CFG_RD_TO_WR_DB(x) \ + (((x) >> 0) & 0x3F) +#define CALTIMING2_CFG_RD_TO_WR_PCH(x) \ + (((x) >> 6) & 0x3F) +#define CALTIMING2_CFG_RD_AP_TO_VALID(x) \ + (((x) >> 12) & 0x3F) +#define CALTIMING2_CFG_WR_TO_WR(x) \ + (((x) >> 18) & 0x3F) +#define CALTIMING2_CFG_WR_TO_WR_DC(x) \ + (((x) >> 24) & 0x3F) + +#define CALTIMING3_CFG_WR_TO_WR_DB(x) \ + (((x) >> 0) & 0x3F) +#define CALTIMING3_CFG_WR_TO_RD(x) \ + (((x) >> 6) & 0x3F) +#define CALTIMING3_CFG_WR_TO_RD_DC(x) \ + (((x) >> 12) & 0x3F) +#define CALTIMING3_CFG_WR_TO_RD_DB(x) \ + (((x) >> 18) & 0x3F) +#define CALTIMING3_CFG_WR_TO_PCH(x) \ + (((x) >> 24) & 0x3F) + +#define CALTIMING4_CFG_WR_AP_TO_VALID(x) \ + (((x) >> 0) & 0x3F) +#define CALTIMING4_CFG_PCH_TO_VALID(x) \ + (((x) >> 6) & 0x3F) +#define CALTIMING4_CFG_PCH_ALL_TO_VALID(x) \ + (((x) >> 12) & 0x3F) +#define CALTIMING4_CFG_ARF_TO_VALID(x) \ + (((x) >> 18) & 0xFF) +#define CALTIMING4_CFG_PDN_TO_VALID(x) \ + (((x) >> 26) & 0x3F) + +#define CALTIMING9_CFG_4_ACT_TO_ACT(x) \ + (((x) >> 0) & 0xFF) + +#endif /* _SDRAM_S10_H_ */ diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c index 6e0f9a2..bb88f30 100644 --- a/arch/arm/mach-socfpga/misc.c +++ b/arch/arm/mach-socfpga/misc.c @@ -162,11 +162,10 @@ static int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; }
-U_BOOT_CMD( - bridge, 2, 1, do_bridge, - "SoCFPGA HPS FPGA bridge control", - "enable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n" - "bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n" - "" +U_BOOT_CMD(bridge, 2, 1, do_bridge, + "SoCFPGA HPS FPGA bridge control", + "enable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n" + "bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n" + "" ); #endif diff --git a/drivers/ddr/altera/Makefile b/drivers/ddr/altera/Makefile index d42fd44..34e50a3 100644 --- a/drivers/ddr/altera/Makefile +++ b/drivers/ddr/altera/Makefile @@ -8,4 +8,5 @@
ifdef CONFIG_ALTERA_SDRAM obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += sdram.o sequencer.o +obj-$(CONFIG_TARGET_SOCFPGA_STRATIX10) += sdram_s10.o endif diff --git a/drivers/ddr/altera/sdram_s10.c b/drivers/ddr/altera/sdram_s10.c new file mode 100644 index 0000000..48f4f47 --- /dev/null +++ b/drivers/ddr/altera/sdram_s10.c @@ -0,0 +1,388 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016-2018 Intel Corporation <www.intel.com> + * + */ + +#include <common.h> +#include <errno.h> +#include <div64.h> +#include <asm/io.h> +#include <wait_bit.h> +#include <asm/arch/firewall_s10.h> +#include <asm/arch/sdram_s10.h> +#include <asm/arch/system_manager.h> +#include <asm/arch/reset_manager.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const struct socfpga_system_manager *sysmgr_regs = + (void *)SOCFPGA_SYSMGR_ADDRESS; + +#define DDR_CONFIG(A, B, C, R) (((A) << 24) | ((B) << 16) | ((C) << 8) | (R)) + +/* The followring are the supported configurations */ +u32 ddr_config[] = { + /* DDR_CONFIG(Address order,Bank,Column,Row) */ + /* List for DDR3 or LPDDR3 (pinout order > chip, row, bank, column) */ + DDR_CONFIG(0, 3, 10, 12), + DDR_CONFIG(0, 3, 9, 13), + DDR_CONFIG(0, 3, 10, 13), + DDR_CONFIG(0, 3, 9, 14), + DDR_CONFIG(0, 3, 10, 14), + DDR_CONFIG(0, 3, 10, 15), + DDR_CONFIG(0, 3, 11, 14), + DDR_CONFIG(0, 3, 11, 15), + DDR_CONFIG(0, 3, 10, 16), + DDR_CONFIG(0, 3, 11, 16), + DDR_CONFIG(0, 3, 12, 15), /* 0xa */ + /* List for DDR4 only (pinout order > chip, bank, row, column) */ + DDR_CONFIG(1, 3, 10, 14), + DDR_CONFIG(1, 4, 10, 14), + DDR_CONFIG(1, 3, 10, 15), + DDR_CONFIG(1, 4, 10, 15), + DDR_CONFIG(1, 3, 10, 16), + DDR_CONFIG(1, 4, 10, 16), + DDR_CONFIG(1, 3, 10, 17), + DDR_CONFIG(1, 4, 10, 17), +}; + +static u32 hmc_readl(u32 reg) +{ + return readl(((void __iomem *)SOCFPGA_HMC_MMR_IO48_ADDRESS + (reg))); +} + +static u32 hmc_ecc_readl(u32 reg) +{ + return readl((void __iomem *)SOCFPGA_SDR_ADDRESS + (reg)); +} + +static u32 hmc_ecc_writel(u32 data, u32 reg) +{ + return writel(data, (void __iomem *)SOCFPGA_SDR_ADDRESS + (reg)); +} + +static u32 ddr_sch_writel(u32 data, u32 reg) +{ + return writel(data, + (void __iomem *)SOCFPGA_SDR_SCHEDULER_ADDRESS + (reg)); +} + +int match_ddr_conf(u32 ddr_conf) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ddr_config); i++) { + if (ddr_conf == ddr_config[i]) + return i; + } + return 0; +} + +static int emif_clear(void) +{ + hmc_ecc_writel(0, RSTHANDSHAKECTRL); + + return wait_for_bit_le32((const void *)(SOCFPGA_SDR_ADDRESS + + RSTHANDSHAKESTAT), + DDR_HMC_RSTHANDSHAKE_MASK, + false, 1000, false); +} + +static int emif_reset(void) +{ + u32 c2s, s2c, ret; + + c2s = hmc_ecc_readl(RSTHANDSHAKECTRL) & DDR_HMC_RSTHANDSHAKE_MASK; + s2c = hmc_ecc_readl(RSTHANDSHAKESTAT) & DDR_HMC_RSTHANDSHAKE_MASK; + + debug("DDR: c2s=%08x s2c=%08x nr0=%08x nr1=%08x nr2=%08x dst=%08x\n", + c2s, s2c, hmc_readl(NIOSRESERVED0), hmc_readl(NIOSRESERVED1), + hmc_readl(NIOSRESERVED2), hmc_readl(DRAMSTS)); + + if (s2c && emif_clear()) { + printf("DDR: emif_clear() failed\n"); + return -1; + } + + debug("DDR: Triggerring emif reset\n"); + hmc_ecc_writel(DDR_HMC_CORE2SEQ_INT_REQ, RSTHANDSHAKECTRL); + + /* if seq2core[3] = 0, we are good */ + ret = wait_for_bit_le32((const void *)(SOCFPGA_SDR_ADDRESS + + RSTHANDSHAKESTAT), + DDR_HMC_SEQ2CORE_INT_RESP_MASK, + false, 1000, false); + if (ret) { + printf("DDR: failed to get ack from EMIF\n"); + return ret; + } + + ret = emif_clear(); + if (ret) { + printf("DDR: emif_clear() failed\n"); + return ret; + } + + debug("DDR: %s triggered successly\n", __func__); + return 0; +} + +static int poll_hmc_clock_status(void) +{ + return wait_for_bit_le32(&sysmgr_regs->hmc_clk, + SYSMGR_HMC_CLK_STATUS_MSK, true, 1000, false); +} + +/** + * sdram_mmr_init_full() - Function to initialize SDRAM MMR + * + * Initialize the SDRAM MMR. + */ +int sdram_mmr_init_full(unsigned int unused) +{ + u32 update_value, io48_value, ddrioctl; + u32 i; + int ret; + + /* Enable access to DDR from CPU master */ + clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_DDRREG), + CCU_ADBASE_DI_MASK); + clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_MEMSPACE0), + CCU_ADBASE_DI_MASK); + clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_MEMSPACE1A), + CCU_ADBASE_DI_MASK); + clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_MEMSPACE1B), + CCU_ADBASE_DI_MASK); + clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_MEMSPACE1C), + CCU_ADBASE_DI_MASK); + clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_MEMSPACE1D), + CCU_ADBASE_DI_MASK); + clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADBASE_MEMSPACE1E), + CCU_ADBASE_DI_MASK); + + /* Enable access to DDR from IO master */ + clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADBASE_MEMSPACE0), + CCU_ADBASE_DI_MASK); + clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADBASE_MEMSPACE1A), + CCU_ADBASE_DI_MASK); + clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADBASE_MEMSPACE1B), + CCU_ADBASE_DI_MASK); + clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADBASE_MEMSPACE1C), + CCU_ADBASE_DI_MASK); + clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADBASE_MEMSPACE1D), + CCU_ADBASE_DI_MASK); + clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADBASE_MEMSPACE1E), + CCU_ADBASE_DI_MASK); + + /* this enables nonsecure access to DDR */ + /* mpuregion0addr_limit */ + FW_MPU_DDR_SCR_WRITEL(0xFFFF0000, FW_MPU_DDR_SCR_MPUREGION0ADDR_LIMIT); + FW_MPU_DDR_SCR_WRITEL(0x1F, FW_MPU_DDR_SCR_MPUREGION0ADDR_LIMITEXT); + + /* nonmpuregion0addr_limit */ + FW_MPU_DDR_SCR_WRITEL(0xFFFF0000, + FW_MPU_DDR_SCR_NONMPUREGION0ADDR_LIMIT); + FW_MPU_DDR_SCR_WRITEL(0x1F, FW_MPU_DDR_SCR_NONMPUREGION0ADDR_LIMITEXT); + + /* Enable mpuregion0enable and nonmpuregion0enable */ + FW_MPU_DDR_SCR_WRITEL(MPUREGION0_ENABLE | NONMPUREGION0_ENABLE, + FW_MPU_DDR_SCR_EN_SET); + + /* Ensure HMC clock is running */ + if (poll_hmc_clock_status()) { + puts("DDR: Error as HMC clock not running\n"); + return -1; + } + + /* release DDR scheduler from reset */ + socfpga_per_reset(SOCFPGA_RESET(SDR), 0); + + /* Try 3 times to do a calibration */ + for (i = 0; i < 3; i++) { + ret = wait_for_bit_le32((const void *)(SOCFPGA_SDR_ADDRESS + + DDRCALSTAT), + DDR_HMC_DDRCALSTAT_CAL_MSK, true, 1000, + false); + if (!ret) + break; + + emif_reset(); + } + + if (ret) { + puts("DDR: Error as SDRAM calibration failed\n"); + return -1; + } + debug("DDR: Calibration success\n"); + + u32 ctrlcfg0 = hmc_readl(CTRLCFG0); + u32 ctrlcfg1 = hmc_readl(CTRLCFG1); + u32 dramaddrw = hmc_readl(DRAMADDRW); + u32 dramtim0 = hmc_readl(DRAMTIMING0); + u32 caltim0 = hmc_readl(CALTIMING0); + u32 caltim1 = hmc_readl(CALTIMING1); + u32 caltim2 = hmc_readl(CALTIMING2); + u32 caltim3 = hmc_readl(CALTIMING3); + u32 caltim4 = hmc_readl(CALTIMING4); + u32 caltim9 = hmc_readl(CALTIMING9); + + /* + * Configure the DDR IO size [0xFFCFB008] + * niosreserve0: Used to indicate DDR width & + * bit[7:0] = Number of data bits (bit[6:5] 0x01=32bit, 0x10=64bit) + * bit[8] = 1 if user-mode OCT is present + * bit[9] = 1 if warm reset compiled into EMIF Cal Code + * bit[10] = 1 if warm reset is on during generation in EMIF Cal + * niosreserve1: IP ADCDS version encoded as 16 bit value + * bit[2:0] = Variant (0=not special,1=FAE beta, 2=Customer beta, + * 3=EAP, 4-6 are reserved) + * bit[5:3] = Service Pack # (e.g. 1) + * bit[9:6] = Minor Release # + * bit[14:10] = Major Release # + */ + update_value = hmc_readl(NIOSRESERVED0); + hmc_ecc_writel(((update_value & 0xFF) >> 5), DDRIOCTRL); + ddrioctl = hmc_ecc_readl(DDRIOCTRL); + + /* enable HPS interface to HMC */ + hmc_ecc_writel(DDR_HMC_HPSINTFCSEL_ENABLE_MASK, HPSINTFCSEL); + + /* Set the DDR Configuration */ + io48_value = DDR_CONFIG(CTRLCFG1_CFG_ADDR_ORDER(ctrlcfg1), + (DRAMADDRW_CFG_BANK_ADDR_WIDTH(dramaddrw) + + DRAMADDRW_CFG_BANK_GRP_ADDR_WIDTH(dramaddrw)), + DRAMADDRW_CFG_COL_ADDR_WIDTH(dramaddrw), + DRAMADDRW_CFG_ROW_ADDR_WIDTH(dramaddrw)); + + update_value = match_ddr_conf(io48_value); + if (update_value) + ddr_sch_writel(update_value, DDR_SCH_DDRCONF); + + /* Configure HMC dramaddrw */ + hmc_ecc_writel(hmc_readl(DRAMADDRW), DRAMADDRWIDTH); + + /* + * Configure DDR timing + * RDTOMISS = tRTP + tRP + tRCD - BL/2 + * WRTOMISS = WL + tWR + tRP + tRCD and + * WL = RL + BL/2 + 2 - rd-to-wr ; tWR = 15ns so... + * First part of equation is in memory clock units so divide by 2 + * for HMC clock units. 1066MHz is close to 1ns so use 15 directly. + * WRTOMISS = ((RL + BL/2 + 2 + tWR) >> 1)- rd-to-wr + tRP + tRCD + */ + u32 burst_len = CTRLCFG0_CFG_CTRL_BURST_LEN(ctrlcfg0); + + update_value = CALTIMING2_CFG_RD_TO_WR_PCH(caltim2) + + CALTIMING4_CFG_PCH_TO_VALID(caltim4) + + CALTIMING0_CFG_ACT_TO_RDWR(caltim0) - + (burst_len >> 2); + io48_value = (((DRAMTIMING0_CFG_TCL(dramtim0) + 2 + DDR_TWR + + (burst_len >> 1)) >> 1) - + /* Up to here was in memory cycles so divide by 2 */ + CALTIMING1_CFG_RD_TO_WR(caltim1) + + CALTIMING0_CFG_ACT_TO_RDWR(caltim0) + + CALTIMING4_CFG_PCH_TO_VALID(caltim4)); + + ddr_sch_writel(((CALTIMING0_CFG_ACT_TO_ACT(caltim0) << + DDR_SCH_DDRTIMING_ACTTOACT_OFF) | + (update_value << DDR_SCH_DDRTIMING_RDTOMISS_OFF) | + (io48_value << DDR_SCH_DDRTIMING_WRTOMISS_OFF) | + ((burst_len >> 2) << DDR_SCH_DDRTIMING_BURSTLEN_OFF) | + (CALTIMING1_CFG_RD_TO_WR(caltim1) << + DDR_SCH_DDRTIMING_RDTOWR_OFF) | + (CALTIMING3_CFG_WR_TO_RD(caltim3) << + DDR_SCH_DDRTIMING_WRTORD_OFF) | + (((ddrioctl == 1) ? 1 : 0) << + DDR_SCH_DDRTIMING_BWRATIO_OFF)), + DDR_SCH_DDRTIMING); + + /* Configure DDR mode [precharge = 0] */ + ddr_sch_writel(((ddrioctl ? 0 : 1) << + DDR_SCH_DDRMOD_BWRATIOEXTENDED_OFF), + DDR_SCH_DDRMODE); + + /* Configure the read latency */ + ddr_sch_writel((DRAMTIMING0_CFG_TCL(dramtim0) >> 1) + + DDR_READ_LATENCY_DELAY, + DDR_SCH_READ_LATENCY); + + /* + * Configuring timing values concerning activate commands + * [FAWBANK alway 1 because always 4 bank DDR] + */ + ddr_sch_writel(((CALTIMING0_CFG_ACT_TO_ACT_DB(caltim0) << + DDR_SCH_ACTIVATE_RRD_OFF) | + (CALTIMING9_CFG_4_ACT_TO_ACT(caltim9) << + DDR_SCH_ACTIVATE_FAW_OFF) | + (DDR_ACTIVATE_FAWBANK << + DDR_SCH_ACTIVATE_FAWBANK_OFF)), + DDR_SCH_ACTIVATE); + + /* + * Configuring timing values concerning device to device data bus + * ownership change + */ + ddr_sch_writel(((CALTIMING1_CFG_RD_TO_RD_DC(caltim1) << + DDR_SCH_DEVTODEV_BUSRDTORD_OFF) | + (CALTIMING1_CFG_RD_TO_WR_DC(caltim1) << + DDR_SCH_DEVTODEV_BUSRDTOWR_OFF) | + (CALTIMING3_CFG_WR_TO_RD_DC(caltim3) << + DDR_SCH_DEVTODEV_BUSWRTORD_OFF)), + DDR_SCH_DEVTODEV); + + /* assigning the SDRAM size */ + unsigned long long size = sdram_calculate_size(); + /* If the size is invalid, use default Config size */ + if (size <= 0) + gd->ram_size = PHYS_SDRAM_1_SIZE; + else + gd->ram_size = size; + + /* Enable or disable the SDRAM ECC */ + if (CTRLCFG1_CFG_CTRL_EN_ECC(ctrlcfg1)) { + setbits_le32(SOCFPGA_SDR_ADDRESS + ECCCTRL1, + (DDR_HMC_ECCCTL_AWB_CNT_RST_SET_MSK | + DDR_HMC_ECCCTL_CNT_RST_SET_MSK | + DDR_HMC_ECCCTL_ECC_EN_SET_MSK)); + clrbits_le32(SOCFPGA_SDR_ADDRESS + ECCCTRL1, + (DDR_HMC_ECCCTL_AWB_CNT_RST_SET_MSK | + DDR_HMC_ECCCTL_CNT_RST_SET_MSK)); + setbits_le32(SOCFPGA_SDR_ADDRESS + ECCCTRL2, + (DDR_HMC_ECCCTL2_RMW_EN_SET_MSK | + DDR_HMC_ECCCTL2_AWB_EN_SET_MSK)); + } else { + clrbits_le32(SOCFPGA_SDR_ADDRESS + ECCCTRL1, + (DDR_HMC_ECCCTL_AWB_CNT_RST_SET_MSK | + DDR_HMC_ECCCTL_CNT_RST_SET_MSK | + DDR_HMC_ECCCTL_ECC_EN_SET_MSK)); + clrbits_le32(SOCFPGA_SDR_ADDRESS + ECCCTRL2, + (DDR_HMC_ECCCTL2_RMW_EN_SET_MSK | + DDR_HMC_ECCCTL2_AWB_EN_SET_MSK)); + } + + debug("DDR: HMC init success\n"); + return 0; +} + +/** + * sdram_calculate_size() - Calculate SDRAM size + * + * Calculate SDRAM device size based on SDRAM controller parameters. + * Size is specified in bytes. + */ +unsigned long sdram_calculate_size(void) +{ + u32 dramaddrw = hmc_readl(DRAMADDRW); + + u32 size = 1 << (DRAMADDRW_CFG_CS_ADDR_WIDTH(dramaddrw) + + DRAMADDRW_CFG_BANK_GRP_ADDR_WIDTH(dramaddrw) + + DRAMADDRW_CFG_BANK_ADDR_WIDTH(dramaddrw) + + DRAMADDRW_CFG_ROW_ADDR_WIDTH(dramaddrw) + + DRAMADDRW_CFG_COL_ADDR_WIDTH(dramaddrw)); + + size *= (2 << (hmc_ecc_readl(DDRIOCTRL) & + DDR_HMC_DDRIOCTRL_IOSIZE_MSK)); + + return size; +}