Hi Simon,
On 15. 12. 20 4:55, Simon Glass wrote:
Hi Michal,
On Mon, 14 Dec 2020 at 00:30, Michal Simek michal.simek@xilinx.com wrote:
On 12. 12. 20 16:35, Simon Glass wrote:
Hi Michal,
On Thu, 3 Dec 2020 at 02:13, Michal Simek michal.simek@xilinx.com wrote:
Add support for the WiseChip Semiconductor Inc. (UG-6028GDEBF02) display using the SEPS525 (Syncoam) LCD Controller. Syncoam Seps525 PM-Oled is RGB 160x128 display. This driver has been tested through zynq-spi driver.
ZynqMP> load mmc 1 100000 rainbow.bmp 61562 bytes read in 20 ms (2.9 MiB/s) ZynqMP> bmp info 100000 Image size : 160 x 128 Bits per pixel: 24 Compression : 0 ZynqMP> bmp display 100000 ZynqMP> setenv stdout vidconsole
Signed-off-by: Michal Simek michal.simek@xilinx.com
MAINTAINERS | 1 + drivers/video/Kconfig | 6 + drivers/video/Makefile | 1 + drivers/video/seps525.c | 327 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 335 insertions(+) create mode 100644 drivers/video/seps525.c
Reviewed-by: Simon Glass sjg@chromium.org
nits below
diff --git a/MAINTAINERS b/MAINTAINERS index 2f908843da72..178a43f2b46e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -589,6 +589,7 @@ F: drivers/spi/zynq_qspi.c F: drivers/spi/zynq_spi.c F: drivers/timer/cadence-ttc.c F: drivers/usb/host/ehci-zynq.c +F: drivers/video/seps525.c F: drivers/watchdog/cdns_wdt.c F: include/zynqmppl.h F: include/zynqmp_firmware.h diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 998271b9b628..b354709890b6 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -979,4 +979,10 @@ config VIDEO_VCXK This enables VCXK driver which can be used with VC2K, VC4K and VC8K devices on various boards from BuS Elektronik GmbH.
+config SEPS525
bool "SEPS525"helpEnable support for the Syncoam PM-OLED display driver (RGB 160x128).Currently driver is supporting only SPI interface.endmenu diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 67a492a2d60d..6e4e35c58de7 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -70,6 +70,7 @@ obj-$(CONFIG_VIDEO_SIMPLE) += simplefb.o obj-$(CONFIG_VIDEO_TEGRA20) += tegra.o obj-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o obj-$(CONFIG_VIDEO_VESA) += vesa.o +obj-$(CONFIG_SEPS525) += seps525.o
obj-y += bridge/ obj-y += sunxi/ diff --git a/drivers/video/seps525.c b/drivers/video/seps525.c new file mode 100644 index 000000000000..b4b99b61fb2f --- /dev/null +++ b/drivers/video/seps525.c @@ -0,0 +1,327 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
- FB driver for the WiseChip Semiconductor Inc. (UG-6028GDEBF02) display
- using the SEPS525 (Syncoam) LCD Controller
- Copyright (C) 2020 Xilinx Inc.
- */
+#include <common.h> +#include <command.h> +#include <cpu_func.h> +#include <dm.h> +#include <errno.h> +#include <spi.h> +#include <video.h> +#include <asm/gpio.h> +#include <dm/device_compat.h> +#include <linux/delay.h>
+#define WIDTH 160 +#define HEIGHT 128
+#define SEPS525_INDEX 0x00 +#define SEPS525_STATUS_RD 0x01 +#define SEPS525_OSC_CTL 0x02 +#define SEPS525_IREF 0x80 +#define SEPS525_CLOCK_DIV 0x03 +#define SEPS525_REDUCE_CURRENT 0x04 +#define SEPS525_SOFT_RST 0x05 +#define SEPS525_DISP_ONOFF 0x06 +#define SEPS525_PRECHARGE_TIME_R 0x08 +#define SEPS525_PRECHARGE_TIME_G 0x09 +#define SEPS525_PRECHARGE_TIME_B 0x0A +#define SEPS525_PRECHARGE_CURRENT_R 0x0B +#define SEPS525_PRECHARGE_CURRENT_G 0x0C +#define SEPS525_PRECHARGE_CURRENT_B 0x0D +#define SEPS525_DRIVING_CURRENT_R 0x10 +#define SEPS525_DRIVING_CURRENT_G 0x11 +#define SEPS525_DRIVING_CURRENT_B 0x12 +#define SEPS525_DISPLAYMODE_SET 0x13 +#define SEPS525_RGBIF 0x14 +#define SEPS525_RGB_POL 0x15 +#define SEPS525_MEMORY_WRITEMODE 0x16 +#define SEPS525_MX1_ADDR 0x17 +#define SEPS525_MX2_ADDR 0x18 +#define SEPS525_MY1_ADDR 0x19 +#define SEPS525_MY2_ADDR 0x1A +#define SEPS525_MEMORY_ACCESS_POINTER_X 0x20 +#define SEPS525_MEMORY_ACCESS_POINTER_Y 0x21 +#define SEPS525_DDRAM_DATA_ACCESS_PORT 0x22 +#define SEPS525_GRAY_SCALE_TABLE_INDEX 0x50 +#define SEPS525_GRAY_SCALE_TABLE_DATA 0x51 +#define SEPS525_DUTY 0x28 +#define SEPS525_DSL 0x29 +#define SEPS525_D1_DDRAM_FAC 0x2E +#define SEPS525_D1_DDRAM_FAR 0x2F +#define SEPS525_D2_DDRAM_SAC 0x31 +#define SEPS525_D2_DDRAM_SAR 0x32 +#define SEPS525_SCR1_FX1 0x33 +#define SEPS525_SCR1_FX2 0x34 +#define SEPS525_SCR1_FY1 0x35 +#define SEPS525_SCR1_FY2 0x36 +#define SEPS525_SCR2_SX1 0x37 +#define SEPS525_SCR2_SX2 0x38 +#define SEPS525_SCR2_SY1 0x39 +#define SEPS525_SCR2_SY2 0x3A +#define SEPS525_SCREEN_SAVER_CONTEROL 0x3B +#define SEPS525_SS_SLEEP_TIMER 0x3C +#define SEPS525_SCREEN_SAVER_MODE 0x3D +#define SEPS525_SS_SCR1_FU 0x3E +#define SEPS525_SS_SCR1_MXY 0x3F +#define SEPS525_SS_SCR2_FU 0x40 +#define SEPS525_SS_SCR2_MXY 0x41 +#define SEPS525_MOVING_DIRECTION 0x42 +#define SEPS525_SS_SCR2_SX1 0x47 +#define SEPS525_SS_SCR2_SX2 0x48 +#define SEPS525_SS_SCR2_SY1 0x49 +#define SEPS525_SS_SCR2_SY2 0x4A
+/* SEPS525_DISPLAYMODE_SET */ +#define MODE_SWAP_BGR BIT(7) +#define MODE_SM BIT(6) +#define MODE_RD BIT(5) +#define MODE_CD BIT(4)
+struct seps525_priv {
comments for this
done.
struct gpio_desc reset_gpio;struct gpio_desc dc_gpio;struct udevice *dev;+};
+static int seps525_spi_write_cmd(struct udevice *dev, u8 reg)
u8 reg seems silly as registers are 32/64 bit and this may require masking - just use uint?
This is SPI based controller and there are only 0x4a addresses. That's why u8 should be fine. And 8bit interface is also used.
Just for the record, I'm making a different point. Functions should generally use natural sizes so the compiler doesn't have to mask registers. It depends on how you call the code, static/extern, etc. but it can add to code size. Given that args are passed in registers there is no space benefit, so I just don't understand the desire to use an u8 arg.
I can't see any size difference for arm64 but not a problem to make it 32bit width. I found one more issue with cls that's why I have fixed this in v3 and add one more patch there too.
Thanks, Michal