Integrate Boot counter for Atmel AT91SAM9XE into Kconfig
Reviewed-by: Lukasz Majewski lukma@denx.de Signed-off-by: Alex Kiernan alex.kiernan@gmail.com ---
Changes in v3: None Changes in v2: None
README | 4 ---- drivers/bootcount/Kconfig | 5 +++++ drivers/bootcount/Makefile | 2 +- 3 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/README b/README index 21de2e4..a28030a 100644 --- a/README +++ b/README @@ -2306,10 +2306,6 @@ The following options need to be configured: A better solution is to properly configure the firewall, but sometimes that is not allowed.
-- bootcount support: - CONFIG_AT91SAM9XE - enable special bootcounter support on at91sam9xe based boards. - - Show boot progress: CONFIG_SHOW_BOOT_PROGRESS
diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig index 8c19ae6..e0d1fc2 100644 --- a/drivers/bootcount/Kconfig +++ b/drivers/bootcount/Kconfig @@ -13,6 +13,7 @@ if BOOTCOUNT_LIMIT choice prompt "Boot count device" default BOOTCOUNT_AM33XX if AM33XX || SOC_DA8XX + default BOOTCOUNT_AT91 if AT91SAM9XE
config BOOTCOUNT_EXT bool "Boot counter on EXT filesystem" @@ -55,6 +56,10 @@ config BOOTCOUNT_I2C the bootcounter. CONFIG_BOOTCOUNT_ALEN = address len
+config BOOTCOUNT_AT91 + bool "Boot counter for Atmel AT91SAM9XE" + depends on AT91SAM9XE + endchoice
config SYS_BOOTCOUNT_SINGLEWORD diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile index 62bf55e..a3658c1 100644 --- a/drivers/bootcount/Makefile +++ b/drivers/bootcount/Makefile @@ -3,7 +3,7 @@ #
obj-y += bootcount.o -obj-$(CONFIG_AT91SAM9XE) += bootcount_at91.o +obj-$(CONFIG_BOOTCOUNT_AT91) += bootcount_at91.o obj-$(CONFIG_BOOTCOUNT_AM33XX) += bootcount_davinci.o obj-$(CONFIG_BOOTCOUNT_RAM) += bootcount_ram.o obj-$(CONFIG_BOOTCOUNT_ENV) += bootcount_env.o